Simultaneous Biohydrogen and Bioethanol Production from Anaerobic Fermentation with Immobilized Sludge

The effects of organic loading rates (OLRs) on fermentative productions of hydrogen and ethanol were investigated in a continuous stirred tank reactor (CSTR) with attached sludge using molasses as substrate. The CSTR reactor with attached sludge was operated under different OLRs, ranging from 8 to 24 kg/m3·d. The H2 and ethanol production rate essentially increased with increasing OLR. The highest H2 production rate (10.74 mmol/h·L) and ethanol production rate (11.72 mmol/h·L) were obtained both operating at OLR = 24 kg/m3·d. Linear regression results show that ethanol production rate (y) and H2 production rate (x) were proportionately correlated and can be expressed as y = 1.5365x − 5.054 (r2 = 0.9751). The best energy generation rate was 19.08 kJ/h·L, which occurred at OLR = 24 kg/m3·d. In addition, the hydrogen yield was affected by the presence of ethanol and acetic acid in the liquid phase, and the maximum hydrogen production rate occurred while the ratio of ethanol to acetic acid was close to 1

Enlarging rainfall area of tropical cyclones by atmospheric aerosols

The size of a tropical cyclone (TC), measured by the area of either rainfall or wind, is an important indicator for the potential damage by TC. Modeling studies suggested that aerosols tend to enhance rainfall in the outer rainbands, which enlarges the eyewall radius and expands the extent of rainfall area. However, no observational evidence has yet been reported. Using TC rainfall area and aerosol optical depth (AOD) data, we find that aerosols have a distinguishable footprint in the TC size. Other dynamical factors for TC size, such as relative SST and Coriolis parameter, are also quantified and discussed. We show that, on average, TC rainfall size increases 9–20 km for each 0.1 increase of AOD in the western North Pacific. This finding implies that anthropogenic aerosol pollution can increase not only TC rainfall rate, but also TC rainfall area, resulting in potentially more destructive flooding affecting larger areas

Impact of Aerosols on Convective Clouds and Precipitation

Aerosols are a critical factor in the atmospheric hydrological cycle and radiation budget. As a major reason for clouds to form and a significant attenuator of solar radiation, aerosols affect climate in several ways. Current research suggests that aerosol effects on clouds could further extend to precipitation, both through the formation of cloud particles and by exerting persistent radiative forcing on the climate system that disturbs dynamics. However, the various mechanisms behind these effects, in particular the ones connected to precipitation, are not yet well understood. The atmospheric and climate communities have long been working to gain a better grasp of these critical effects and hence to reduce the significant uncertainties in climate prediction resulting from such a lack of adequate knowledge. The central theme of this paper is to review past efforts and summarize our current understanding of the effect of aerosols on precipitation processes from theoretical analysis of microphysics, observational evidence, and a range of numerical model simulations. In addition, the discrepancy between results simulated by models, as well as that between simulations and observations will be presented. Specifically, this paper will address the following topics: (1) fundamental theories of aerosol effects on microphysics and precipitation processes, (2) observational evidence of the effect of aerosols on precipitation processes, (3) signatures of the aerosol impact on precipitation from large-scale analyses, (4) results from cloud-resolving model simulations, and (5) results from large-scale numerical model simulations. Finally, several future research directions on aerosol - precipitation interactions are suggested

Multiple metrics of diversity have different effects on temperate forest functioning over succession.

Manuscript. Published version available in Oecologia, Dec. 2016, vol. 182, issue 4, pp 1175–1185Biodiversity can be measured by taxonomic, phylogenetic, and functional diversity. How ecosystem functioning depends on these measures of diversity can vary from site to site and depends on successional stage. Here, we measured taxonomic, phylogenetic, and functional diversity, and examined their relationship with biomass in two successional stages of the broad-leaved Korean pine forest in northeastern China. Functional diversity was calculated from six plant traits, and aboveground biomass (AGB) and coarse woody productivity (CWP) were estimated using data from three forest censuses (10 years) in two large fully mapped forest plots (25 and 5 ha). 11 of the 12 regressions between biomass variables (AGB and CWP) and indices of diversity showed significant positive relationships, especially those with phylogenetic diversity. The mean tree diversity-biomass regressions increased from 0.11 in secondary forest to 0.31 in old-growth forest, implying a stronger biodiversity effect in more mature forest. Multi-model selection results showed that models including species richness, phylogenetic diversity, and single functional traits explained more variation in forest biomass than other candidate models. The models with a single functional trait, i.e., leaf area in secondary forest and wood density in mature forest, provided better explanations for forest biomass than models that combined all six functional traits. This finding may reflect different strategies in growth and resource acquisition in secondary and old-growth forests

Local-Scale Drivers of Tree Survival in a Temperate Forest

Tree survival plays a central role in forest ecosystems. Although many factors such as tree size, abiotic and biotic neighborhoods have been proposed as being important in explaining patterns of tree survival, their contributions are still subject to debate. We used generalized linear mixed models to examine the relative importance of tree size, local abiotic conditions and the density and identity of neighbors on tree survival in an old-growth temperate forest in northeastern China at three levels (community, guild and species). Tree size and both abiotic and biotic neighborhood variables influenced tree survival under current forest conditions, but their relative importance varied dramatically within and among the community, guild and species levels. Of the variables tested, tree size was typically the most important predictor of tree survival, followed by biotic and then abiotic variables. The effect of tree size on survival varied from strongly positive for small trees (1–20 cm dbh) and medium trees (20–40 cm dbh), to slightly negative for large trees (>40 cm dbh). Among the biotic factors, we found strong evidence for negative density and frequency dependence in this temperate forest, as indicated by negative effects of both total basal area of neighbors and the frequency of conspecific neighbors. Among the abiotic factors tested, soil nutrients tended to be more important in affecting tree survival than topographic variables. Abiotic factors generally influenced survival for species with relatively high abundance, for individuals in smaller size classes and for shade-tolerant species. Our study demonstrates that the relative importance of variables driving patterns of tree survival differs greatly among size classes, species guilds and abundance classes in temperate forest, which can further understanding of forest dynamics and offer important insights into forest management

A Novel Separated Position and Orientation System Integrated with Inertially Stabilized Platform

Considering the application requirements of independent imaging payloads design, a novel scheme of separated position and orientation system (POS) is proposed, in which the high-precision inertial sensors of traditional centralized POS fixed on the imaging payloads are mounted on three gimbals of the inertially stabilized platform (ISP), respectively, and make them integrated. Then, the kinematics model of the ISP system is built to transmit the inertial information measured by separated inertial sensors mounted on ISP gimbals and flight body to the imaging payloads, calculating the position and attitude of the imaging payloads to achieve the function of separated POS. Based on the model, a series of simulations indicate that the precision difference between separated system and centralized system is ignorable under the condition of angular motion and variable velocity motion. Besides the effective function equal to traditional centralized system, the separated POS enhances the integration with the ISP. Moreover, it improves the design independence of the imaging payloads significantly

Enlarging rainfall area of tropical cyclones by atmospheric aerosols

The size of a tropical cyclone (TC), measured by the area of either rainfall or wind, is an important indicator for the potential damage by TC. Modeling studies suggested that aerosols tend to enhance rainfall in the outer rainbands, which enlarges the eyewall radius and expands the extent of rainfall area. However, no observational evidence has yet been reported. Using TC rainfall area and aerosol optical depth (AOD) data, we find that aerosols have a distinguishable footprint in the TC size. Other dynamical factors for TC size, such as relative SST and Coriolis parameter, are also quantified and discussed. We show that, on average, TC rainfall size increases 9–20 km for each 0.1 increase of AOD in the western North Pacific. This finding implies that anthropogenic aerosol pollution can increase not only TC rainfall rate, but also TC rainfall area, resulting in potentially more destructive flooding affecting larger areas

Aircraft Observations of Dust and Pollutants over NE China: Insight into the Meteorological Mechanisms of Long-Range Transport

Substantial concentrations of trace gases and aerosols are lofted and carried from Asia over the Pacific producing an inter-hemispheric impact on atmospheric chemistry and climate. The meteorological mechanism leading to this large-scale transport of dust and pollutants remains a major uncertainty in quantifying the global effects of emissions from the developing world. Models and downwind measurements have identified isentropic advection associated with wave cyclones (warm conveyor belt circulation) as an important mechanism. We present data from a case study conducted over Shenyang in NE China as part of EAST-AIRE in April 2005 in which upstream convection, rather than WCB lofting appears to dominate. Observations from instrumented aircraft flights, back trajectories, and satellite images of clouds (GOES) and aerosols (MODIS) are analyzed. In this heavily industrialized and populated region, the warm-sector PBL air ahead of a cold front was highly polluted. In the free troposphere, between ~1000 and 4000 m altitude, concentrations of trace gases and aerosols were lower, but well above background; we measured ~70 ppb O3, ~300 ppb CO, ~2 ppb SO2, and ~ 8x10-5 m-1 aerosol scattering. These observations show that dry (non-precipitating) convection can be an important mechanism for converting local air pollution problems into regional or global atmospheric chemistry problems. Climatological data indicate that spring (MAM) precipitation over NE China is low, about 90 mm compared to 290 mm over the NE US. Cloud cover, however, is similar with cumulus clouds reported about 7% of the time over NE China and about 9% of the time over the NE US suggesting that lofting in dry convective events may be common over NE Asia. Evaluation of models’ convective schemes and further observations near the source regions are called for.NS