Direct Measurements of the Branching Fractions for D0→K−e+νeD^0 \to K^-e^+\nu_e and D0→π−e+νeD^0 \to \pi^-e^+\nu_e and Determinations of the Form Factors f+K(0)f_{+}^{K}(0) and f+π(0)f^{\pi}_{+}(0)

The absolute branching fractions for the decays $D^0 \to K^-e ^+\nu_e$ and $D^0 \to \pi^-e^+\nu_e$ are determined using $7584\pm 198 \pm 341$ singly tagged $\bar D^0$ sample from the data collected around 3.773 GeV with the BES-II detector at the BEPC. In the system recoiling against the singly tagged $\bar D^0$ meson, $104.0\pm 10.9$ events for $D^0 \to K^-e ^+\nu_e$ and $9.0 \pm 3.6$ events for $D^0 \to \pi^-e^+\nu_e$ decays are observed. Those yield the absolute branching fractions to be $BF(D^0 \to K^-e^+\nu_e)=(3.82 \pm 0.40\pm 0.27)$ and $BF(D^0 \to \pi^-e^+\nu_e)=(0.33 \pm 0.13\pm 0.03)$. The vector form factors are determined to be $|f^K_+(0)| = 0.78 \pm 0.04 \pm 0.03$ and $|f^{\pi}_+(0)| = 0.73 \pm 0.14 \pm 0.06$. The ratio of the two form factors is measured to be $|f^{\pi}_+(0)/f^K_+(0)|= 0.93 \pm 0.19 \pm 0.07$.Comment: 6 pages, 5 figure

Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta

Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector, the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and (7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure

BESII Detector Simulation

A Monte Carlo program based on Geant3 has been developed for BESII detector simulation. The organization of the program is outlined, and the digitization procedure for simulating the response of various sub-detectors is described. Comparisons with data show that the performance of the program is generally satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM

The σ\sigma pole in J/ψ→ωπ+π−J/\psi \to \omega \pi^+ \pi^-

Using a sample of 58 million $J/\psi$ events recorded in the BESII detector, the decay $J/\psi \to \omega \pi^+ \pi^-$ is studied. There are conspicuous $\omega f_2(1270)$ and $b_1(1235)\pi$ signals. At low $\pi \pi$ mass, a large broad peak due to the $\sigma$ is observed, and its pole position is determined to be $(541 \pm 39)$ - $i$ $(252 \pm 42)$ MeV from the mean of six analyses. The errors are dominated by the systematic errors.Comment: 15 pages, 6 figures, submitted to PL

Search for the Lepton Flavor Violation Processes J/ψ→J/\psi \to μτ\mu\tau and eτe\tau

The lepton flavor violation processes $J/\psi \to \mu\tau$ and $e\tau$ are searched for using a sample of 5.8$\times 10^7$ $J/\psi$ events collected with the BESII detector. Zero and one candidate events, consistent with the estimated background, are observed in $J/\psi \to \mu\tau, \tau\to e\bar\nu_e\nu_{\tau}$ and $J/\psi\to e\tau, \tau\to\mu\bar\nu_{\mu}\nu_{\tau}$ decays, respectively. Upper limits on the branching ratios are determined to be $Br(J/\psi\to\mu\tau)<2.0 \times 10^{-6}$ and $Br(J/\psi \to e\tau) < 8.3 \times10^{-6}$ at the 90% confidence level (C.L.).Comment: 9 pages, 2 figure

Measurements of Cabibbo Suppressed Hadronic Decay Fractions of Charmed D0 and D+ Mesons

Using data collected with the BESII detector at $e^{+}e^{-}$ storage ring Beijing Electron Positron Collider, the measurements of relative branching fractions for seven Cabibbo suppressed hadronic weak decays $D^0 \to K^- K^+$, $\pi^+ \pi^-$, $K^- K^+ \pi^+ \pi^-$ and $\pi^+ \pi^+ \pi^- \pi^-$, $D^+ \to \bar{K^0} K^+$, $K^- K^+ \pi^+$ and $\pi^- \pi^+ \pi^+$ are presented.Comment: 11 pages, 5 figure

Direct Measurement of the Pseudoscalar Decay Constant fD+

The absolute branching fraction of $D^+ \to \mu^+ \nu$ has been directly measured by an analysis of a data sample of about 33 ${\rm pb^{-1}}$ collected around $\sqrt{s}=3.773$ GeV with the BES-II at the BEPC. At these energies, $D^-$ meson is produced in pair as $e^+e^-\to D^{+} D^{-}$. A total of $5321 \pm 149 \pm 160$ $D^-$ mesons are reconstructed from this data set. In the recoil side of the tagged $D^-$ mesons, $2.67\pm1.74$ purely leptonic decay events of $D^+ \to \mu^+ \nu$ are observed. This yields a branching fraction of $BF(D^+ \to \mu^+ \nu_{\mu}) = (0.122^{+0.111}_{-0.053}\pm 0.010)$, and a corresponding pseudoscalar decay constant $f_{D^+}=(371^{+129}_{-119}\pm 25)$ MeV.Comment: 7 pages, 8 figures, Submitted to Physics Letters B in October, 200

Observation of the decay \psip\rar\kstark

Using 14 million $\psi(2S)$ events collected with the BESII detector, branching fractions of \psip\rar\kstarkpm and \kstarknn are determined to be: \calB(\psip\rar\kstarkpm)=(2.9^{+1.3}_{-1.7}\pm0.4)\times 10^{-5} and \calB(\psip\rar\kstarknn)=(13.3^{+2.4}_{-2.7}\pm1.9)\times 10^{-5}. The results confirm the violation of the "12%" rule for these two decay channels with higher precision. A large isospin violation between the charged and neutral modes is observed.Comment: 5 pages, 3 figure

Life cycle assessment approach for renewable multi-energy system: A comprehensive analysis

In response to the gradual degradation of natural sources, there is a growing interest in adopting renewable resources for various building energy supply. In this study, a comprehensive life cycle assessment approach is proposed for a renewable multi-energy system (MES) to evaluate its primary energy consumption, economy cost and carbon emission from cradle to grave. The MES, consisting of passive side and active side, is fully driven by renewable energy including solar, wind and biomass. On the passive side, building integrated photovoltaic, solar collector and wind turbines are adopted. On the active side, the biomass-fuelled combined cooling heating and power system (CCHP) serves as the primary energy supplier. The electric compression chiller and biomass boiler are adopted when the thermal energy from the CCHP system is not sufficient, while electricity is imported from the city power grid when the electricity demand is low. A representative office building in the United Kingdom and real-life inventory data is adopted to demonstrate the effectiveness of the proposed life cycle assessment approach. Through life cycle assessment, the advantages and disadvantages of the MES are compared with the reference CCHP system and conventional separate system in view of life cycle primary energy consumption, economy cost and carbon emission. Moreover, to gain an insight into the life cycle performance, the sensitivity analysis is conducted on the rated capacity of the power generation unit, climate zones, life span, recycle ratio and interest rate. The life cycle cost of MES is relatively higher than the conventional separate system mainly owing to the high construction cost of BIPV, wind turbine, solar collector and biomass feedstock. However, its life cycle primary energy consumption and carbon emission are much lower. It is believed that the proposed life cycle assessment approach can provide useful guidelines for government in policymaking and for building engineers in retrofitting works