12,321 research outputs found
Disaster management using D2D communication with power transfer and clustering techniques
Device-to-device (D2D) communications as an underlay to cellular networks can not only increase the system capacity and energy efficiency but also enable national security and public safety services. A key requirement for these services is to provide alternative access to cellular networks when they are partially or fully damaged due to a natural disaster event. In this paper, we employ energy harvesting (EH) at the relay with simultaneous wireless information and power transfer to prolong the lifetime of energy constrained network. In particular, we consider a user equipment relay that harvests energy from radio frequency signal via base station and use harvested energy for D2D communications. We integrate clustering technique with D2D communications into cellular networks such that communication services can be maintained when the cellular infrastructure becomes partially dysfunctional. Simulation results show that our proposed EH-based D2D clustering model performs efficiently in terms of coverage, energy efficiency, and cluster formation to extend the communication area. Moreover, a novel concept of power transfer in D2D clustering with user equipment relay and cluster head is proposed to provide a new framework to handle critical and emergency situations. The proposed approach is shown to provide significant energy saving for both mobile users and clustering heads to survive in emergency and disaster situations
Structural and magnetic properties of Pr-alloyed MnBi nanostructures
The structural and magnetic properties of Pr-alloyed MnBi (short MnBi-Pr)
nanostructures with a range of Pr concentrations have been investigated. The
nanostructures include thin films having Pr concentrations 0, 2, 3, 5 and 9
atomic percent and melt-spun ribbons having Pr concentrations 0, 2, 4 and 6
percent respectively. Addition of Pr into the MnBi lattice has produced a
significant change in the magnetic properties of these nanostructures including
an increase in coercivity and structural phase transition temperature, and a
decrease in saturation magnetization and anisotropy energy. The highest value
of coercivity measured in the films is 23 kOe and in the ribbons is 5.6 kOe.
The observed magnetic properties are explained as the consequences of competing
ferromagnetic and antiferromagnetic interactions
Synthetic sodalite doped with silver nanoparticles : characterization and mercury (II) removal from aqueous solutions
In this work, a novel silver nanoparticles-doped synthetic sodalitic composite was synthesized and characterized using advanced characterization methods, namely TEM-EDS, XRD, SEM, XRF, BET, zeta potential, and particle size analysis. The synthesized nanocomposite was used for the removal of Hg2+ from 10 ppm aqueous solutions of initial pH equal to 2. The results showed that the sodalitic nanocomposites removed up to 98.65% of Hg2+, which is ∼16% and 70% higher than the removal achieved by sodalite and parent coal fly ash, respectively. The findings revealed that the Hg2+ removal mechanism is a multifaceted mechanism that predominantly involves adsorption, precipitation and Hg-Ag amalgamation. The study of the anions effect (Cl−, NO3−, C2H3O2−, and SO42−) indicated that the Hg2+ uptake is comparatively higher when Cl− anions co-exist with Hg2+ in the solution
Advances in startercultures and cultured foods
With 2005 retail sales close to $4.8 million, cultured dairy products are driving the growth of dairy foods consumption. Starter cultures are of great industrial significance in that they play a vital role in the manufacturing, flavor, and texture development of fermented dairy foods. Furthermore, additional interest in starter bacteria has been generated because of the data accumulating on the potential health benefits of these organisms. Today, starter cultures for fermented foods are developed mainly by design rather than by the traditional screening methods and trial and error. Advances in genetics and molecular biology have provided opportunities for genomic studies of these economically significant organisms and engineering of cultures that focuses on rational improvement of the industrially useful strain. Furthermore, much research has been published on the health benefits associated with ingesting cultured dairy foods and probiotics, particularly their role in modulating immune function. The aim of this review is to describe some of the major scientific advances made in starter and non-starter lactic acid bacteria during the past 10 yr, including genomic studies on dairy starter cultures, engineering of culture attributes, advances in phage control, developments in methods to enumerate lactic acid bacteria and probiotics in dairy foods, and the potential role of cultured dairy foods in modulation of immune function
ARPES in the normal state of the cuprates: comparing the marginal Fermi liquid and spin fluctuation scenarios
We address the issue whether ARPES measurements of the spectral function near the Fermi surface in the normal state of near optimally doped
cuprates can distinguish between the marginal Fermi liquid scenario and the
spin-fluctuation scenario. We argue that the data for momenta near the Fermi
surface are equally well described by both theories, but this agreement is
nearly meaningless as in both cases one has to add to a large constant of yet unknown origin. We show that the data can be
well fitted by keeping only this constant term in the self-energy. To
distinguish between the two scenarios, one has to analyze the data away from
the Fermi surface, when the intrinsic piece in becomes
dominant.Comment: Accepted for publication in Europhysics Letters, Incorrect
interpretation of reference 10 correcte
Calculations of the A_1 phonon frequency in photoexcited Tellurium
Calculations of the A_1 phonon frequency in photoexcited tellurium are
presented. The phonon frequency as a function of photoexcited carrier density
and phonon amplitude is determined. Recent pump probe experiments are
interpreted in the light of these calculatons. It is proposed that, in
conjunction with measurements of the phonon period in ultra-fast pump-probe
reflectivity experiments, the calculated frequency shifts can be used to infer
the evolution of the density of photoexcited carriers on a sub-picosecond
time-scale.Comment: 15 pages Latex, 3 postscript figure
A family of cyclin D homologs from plants differentially controlled by growth regulators and containing the conserved retinoblastoma protein interaction motif.
Aero-acoustics of Drag Generating Swirling Exhaust Flows
Aircraft on approach in high-drag and high-lift configuration create unsteady flow structures which inherently generate noise. For devices such as flaps, spoilers and the undercarriage there is a strong correlation between overall noise and drag such that, in the quest for quieter aircraft, one challenge is to generate drag at low noise levels. This paper presents a rigorous aero-acoustic assessment of a novel drag concept. The idea is that a swirling exhaust flow can yield a steady, and thus relatively quiet, streamwise vortex which is supported by a radial pressure gradient responsible for pressure drag. Flows with swirl are naturally limited by instabilities such as vortex breakdown. The paper presents a first aero-acoustic assessment of ram pressure driven swirling exhaust flows and their associated instabilities. The technical approach combines an in-depth aerodynamic analysis, plausibility arguments to qualitatively describe the nature of acoustic sources, and detailed, quantitative acoustic measurements using a medium aperture directional microphone array in combination with a previously established Deconvolution Approach for Mapping of Acoustic Sources (DAMAS). A model scale engine nacelle with stationary swirl vanes was designed and tested in the NASA Langley Quiet Flow Facility at a full-scale approach Mach number of 0.17. The analysis shows that the acoustic signature is comprised of quadrupole-type turbulent mixing noise of the swirling core flow and scattering noise from vane boundary layers and turbulent eddies of the burst vortex structure near sharp edges. The exposed edges are the nacelle and pylon trailing edge and the centerbody supporting the vanes. For the highest stable swirl angle setting a nacelle area based drag coefficient of 0.8 was achieved with a full-scale Overall Sound Pressure Level (OASPL) of about 40dBA at the ICAO approach certification point
Bearing performance and damage characteristics of rein-infused thermoplastic 3D woven composites bolted joints
This paper presents a comprehensive study on the single-bolt single-shear (SBSS) and double-bolt single shear (DBSS) lap joint performance of resin-infused thermoplastic 3D fibre-reinforced composite (FRC) in on-axis (0°and 90°) and off-axis (45°) configurations. The bearing performance and failure mechanisms are compared with thermoset 3D-FRC. The resin-infused thermoplastic 3D-FRC bolted joint shows improved bearing performance in terms of higher ultimate bearing strength, stiffness loss strength, and reduced damage severity than its thermoset counterpart. Additionally, this paper presents a detailed study on the intermediate and final failure mechanisms, obtained from scanning electron microscopy of the interrupted and ultimate bearing tests, to understand damage progression in SBSS and BDSS lap joints at the submicron level. The major damage characteristics of a thermoplastic 3D-FRC bolted joint include plastic deformation and plastic kinking at the hole front tip, which improve the bearing capacity and reduce stress concentration, damage severity, and its deleterious effects
Recommended from our members
Glycemic Control and Cardiovascular Mortality in Hemodialysis Patients With Diabetes
Previous observational studies using differing methodologies have yielded inconsistent results regarding the association between glycemic control and outcomes in diabetic patients receiving maintenance hemodialysis (MHD). We examined mortality predictability of A1C and random serum glucose over time in a contemporary cohort of 54,757 diabetic MHD patients (age 63 ± 13 years, 51% men, 30% African Americans, 19% Hispanics). Adjusted all-cause death hazard ratio (HR) for baseline A1C increments of 8.0–8.9, 9.0–9.9, and ≥10%, compared with 7.0–7.9% (reference), was 1.06 (95% CI 1.01–1.12), 1.05 (0.99–1.12), and 1.19 (1.12–1.28), respectively, and for time-averaged A1C was 1.11 (1.05–1.16), 1.36 (1.27–1.45), and 1.59 (1.46–1.72). A symmetric increase in mortality also occurred with time-averaged A1C levels in the low range (6.0–6.9%, HR 1.05 [95% CI 1.01–1.08]; 5.0–5.9%, 1.08 [1.04–1.11], and ≤5%, 1.35 [1.29–1.42]) compared with 7.0–7.9% in fully adjusted models. Adjusted all-cause death HR for time-averaged blood glucose 175–199, 200–249, 250–299, and ≥300 mg/dL, compared with 150–175 mg/dL (reference), was 1.03 (95% CI 0.99–1.07), 1.14 (1.10–1.19), 1.30 (1.23–1.37), and 1.66 (1.56–1.76), respectively. Hence, poor glycemic control (A1C ≥8% or serum glucose ≥200 mg/dL) appears to be associated with high all-cause and cardiovascular death in MHD patients. Very low glycemic levels are also associated with high mortality risk
- …