138 research outputs found
Turbulence coefficients and stability studies for the coaxial flow or dissimiliar fluids
Analytical investigations of fluid dynamics problems of relevance to the gaseous core nuclear reactor program are presented. The vortex type flow which appears in the nuclear light bulb concept is analyzed along with the fluid flow in the fuel inlet region for the coaxial flow gaseous core nuclear reactor concept. The development of numerical methods for the solution of the Navier-Stokes equations for appropriate geometries is extended to the case of rotating flows and almost completes the gas core program requirements in this area. The investigations demonstrate that the conceptual design of the coaxial flow reactor needs further development
Flow in a two-dimensional channel with a rectangular cavity
Flow characteristics in two dimensional channel with rectangular cavit
Analytical investigation of incompressible turbulent swirling flow in pipes
Mixing length flow theory for analyzing incompressible turbulent swirling flow in pipe
Laminar mixing of heterogeneous axisymmetric coaxial confined jets Final report
Laminar mixing of heterogeneous axisymmetrical coaxial confined jets for application to nuclear rocket propulsio
Advanced Open-Cycle Desiccant Cooling System
The concept of staged regeneration as means of improving
the desiccant cooling system performance is the subject of investigation
in this study. In the staged regeneration, the regeneration
section of desiccant dehumidifier is divided into two parts and
only the latter fraction is subjected to the desorption air stream
which has been heated to the desired regeneration temperature.
In the present work, the mathematical model describing the
heat and mass transfer processes that occur during sorption of
moisture in the desiccnnt dehumidifier includes both the gas-side
(film) and solid-side resistances for heat and mass transports. The
moisture diffusion in the desiccant material is expressed by gas-phase
diffusion and surface diffusion. Effects of several
parameters on the performance of desiccant cooling system with
staged regeneration are investigated and the results of present
model are compared with those of the lumped-resistance model.
Results of this study show that coefficient of perfomnnce of
the desiccant cooling system can be substantially improved by
using the staged regeneration concept. There is an optimum stage
fraction and optimum cycle time for given system parmeters and
operating conditions. The results also indicate that the cooling
system performance is higher than that predicted by the lumped-resistance
model
Tunable Growth Factor Delivery from Injectable Hydrogels for Tissue Engineering
Current sustained delivery strategies of protein therapeutics are limited by the fragility of the protein, resulting in minimal quantities of bioactive protein delivered. In order to achieve prolonged release of bioactive protein, an affinity-based approach was designed which exploits the specific binding of the Src homology 3 (SH3) domain with short proline-rich peptides. Specifically, methyl cellulose was modified with SH3-binding peptides (MC-peptide) with either a weak affinity or strong affinity for SH3. The release profile of SH3-rhFGF2 fusion protein from hyaluronan MC-SH3 peptide (HAMC-peptide) hydrogels was investigated and compared to unmodified controls. SH3-rhFGF2 release from HAMC-peptide was extended to 10 days using peptides with different binding affinities compared to the 48 h release from unmodified HAMC. This system is capable of delivering additional proteins with tunable rates of release, while maintaining bioactivity, and thus is broadly applicable
Programmable Assembly of DNA-Functionalized Liposomes by DNA
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Nano, copyright Β© American Chemical Society after peer review and technical editing by publisher. To access the final edited and published work see http://dx.doi.org/10.1021/nn1030093Bionanotechnology involves the use of biomolecules to control both the structure and property of nanomaterials. One of the most studied examples is DNA-directed assembly of inorganic nanoparticles such as gold nanoparticles (AuNPs). However, systematic studies on DNA-linked soft nanoparticles, such as liposomes, are still lacking. We herein report the programmable assembly and systematic characterization of DNA-linked liposomes as a function of liposome size, charge, fluidity, composition, DNA spacer, linker DNA sequence, and salt concentration for direct comparison to DNA-directed assembly of AuNPs. Similar to the assemblies of AuNPs, sharp melting transitions were observed for liposomes where the first derivative of the melting curve full width at half-maximum (fwhm) is equal to or less than 1 Β°C for all of the tested liposomes, allowing sequence specific DNA detection. We found that parameters such as liposome size, charge, and fluidity have little effect on the DNA melting temperature. Cryo-TEM studies showed that programmable assemblies can be obtained and that the majority of the liposomes maintained a spherical shape in the assembled state. While liposome and AuNP systems are similar in many aspects, there are also important differences that can be explained by their respective physical properties.University of Waterloo ||
Natural Sciences and Engineering Research Council |
A Three Species Model to Simulate Application of Hyperbaric Oxygen Therapy to Chronic Wounds
Chronic wounds are a significant socioeconomic problem for governments worldwide. Approximately 15% of people who suffer from diabetes will experience a lower-limb ulcer at some stage of their lives, and 24% of these wounds will ultimately result in amputation of the lower limb. Hyperbaric Oxygen Therapy (HBOT) has been shown to aid the healing of chronic wounds; however, the causal reasons for the improved healing remain unclear and hence current HBOT protocols remain empirical. Here we develop a three-species mathematical model of wound healing that is used to simulate the application of hyperbaric oxygen therapy in the treatment of wounds. Based on our modelling, we predict that intermittent HBOT will assist chronic wound healing while normobaric oxygen is ineffective in treating such wounds. Furthermore, treatment should continue until healing is complete, and HBOT will not stimulate healing under all circumstances, leading us to conclude that finding the right protocol for an individual patient is crucial if HBOT is to be effective. We provide constraints that depend on the model parameters for the range of HBOT protocols that will stimulate healing. More specifically, we predict that patients with a poor arterial supply of oxygen, high consumption of oxygen by the wound tissue, chronically hypoxic wounds, and/or a dysfunctional endothelial cell response to oxygen are at risk of nonresponsiveness to HBOT. The work of this paper can, in some way, highlight which patients are most likely to respond well to HBOT (for example, those with a good arterial supply), and thus has the potential to assist in improving both the success rate and hence the cost-effectiveness of this therapy
Factors associated with spontaneous stone passage in a contemporary cohort of patients presenting with acute ureteric colic. Results from the MIMIC Study (A Multi-centre cohort study evaluating the role of Inflammatory Markers in patients presenting with acute ureteric Colic)
Objectives
There is conflicting data on the role of white blood cell count (WBC) and other inflammatory markers in spontaneous stone passage in patients with acute ureteric colic. The aim of the study was to assess the relationship of WBC and other routinely collected inflammatory and clinical markers including stone size, stone position and Medically Expulsive Therapy use (MET) with spontaneous stone passage (SSP) in a large contemporary cohort of patients with acute ureteric colic.
Subjects and Methods
Multiβcentre retrospective cohort study coordinated by the British Urology Researchers in Surgical Training (BURST) Research Collaborative at 71 secondary care hospitals across 4 countries (United Kingdom, Republic of Ireland, Australia and New Zealand). 4170 patients presented with acute ureteric colic and a computer tomography confirmed single ureteric stone. Our primary outcome measure was SSP as defined by the absence of need for intervention to assist stone passage. Multivariable mixed effects logistic regression was used to explore the relationship between key patient factors and SSP.
Results
2518 patients were discharged with conservative management and had further follow up with a SSP rate of 74% (n = 1874/2518). Sepsis after discharge with conservative management was reported in 0.6% (n = 16/2518). On multivariable analysis neither WBC, Neutrophils or CRP were seen to predict SSP, with an adjusted OR of 0.97 [95% CI 0.91 to 1.04, p = 0.38], 1.06 [95% CI 0.99 to 1.13, p = 0.1] and 1.00 [95% CI 0.99 to 1.00, p = 0.17], respectively. Medical expulsive therapy (MET) also did not predict SSP [adjusted OR 1.11 [95% CI 0.76 to 1.61]). However, stone size and stone position were significant predictors. SSP for stones 7mm. For stones in the upper ureter the SSP rate was 52% [95% CI 48 to 56], middle ureter was 70% [95% CI 64 to 76], and lower ureter was 83% [95% CI 81 to 85].
Conclusion
In contrast to the previously published literature, we found that in patients with acute ureteric colic who are discharged with initial conservative management, neither WBC, Neutrophil count or CRP help determine the likelihood of spontaneous stone passage. We also found no overall benefit from the use of MET. Stone size and position are important predictors and our findings represent the most comprehensive stone passage rates for each mm increase in stone size from a large contemporary cohort adjusting for key potential confounders. We anticipate that these data will aid clinicians managing patients with acute ureteric colic and help guide management decisions and the need for intervention
- β¦