Middle-Late Eocene marine record of the Biga Peninsula, NW Anatolia, Turkey

The Eocene shallow marine deposits marking the first marine incursion in the Biga Peninsula (NW Turkey) after the collision of the Sakarya and Anatolide-Tauride plates were investigated based on paleontological, litho- and chrono-stratigraphic data. Larger Benthic Foraminifera (LBF) from patchily distributed outcrops were studied in order to i) revise the stratigraphy of Eocene shallow marine units, and ii) establish a modern biostratigraphic setting and a correlation scheme. The Şevketiye Formation (Fm.) is herein defined as a predominantly shallow marine clastic deposit with subordinate carbonates overlying the Çamlıca metamorphic rocks, and passing laterally to the Soğucak Fm., a carbonate unit that is widely represented in the Thrace Basin. The record of alveolinids, primitive developmental stages of heterosteginids, and orthophragminids in the Şevketiye Fm. suggests that this formation is part of the Shallow Benthic Zones (SBZ) 16?/17 (Late Lutetian?/Early Bartonian), SBZ17?/18 and SBZ19A (Early Bartonian/earliest Priabonian). The Soğucak Fm., which overlies the Eocene volcanics, on the other hand, yielded advanced developmental stages of heterosteginids, Spiroclypeus sp. and Nummulites fabianii lineages, implying a younger marine incursion during the Late Eocene (earliest Priabonian; SBZ19A). A drastic shift in the depositional regime is marked amid Priabonian by the deposition of deep-marine clastics and volcanoclastics of the Ceylan Fm. In conclusion, the Eocene Sea transgressed first Gökçeada (in the Aegean Sea) during the Late Lutetian, then reached the Biga and Gelibolu peninsulas in the Bartonian, and finally led to the widespread deposition of carbonate and siliciclastic rocks in the Biga Peninsula and the Thrace Basin during the Late Bartonian and Priabonian

Middle-Late Eocene marine record of the Biga Peninsula, NW Anatolia, Turkey

The Eocene shallow marine deposits marking the first marine incursion in the Biga Peninsula (NW Turkey) after the collision of the Sakarya and Anatolide-Tauride plates were investigated based on paleontological, litho- and chrono-stratigraphic data. Larger Benthic Foraminifera (LBF) from patchily distributed outcrops were studied in order to i) revise the stratigraphy of Eocene shallow marine units, and ii) establish a modern biostratigraphic setting and a correlation scheme. The Şevketiye Formation (Fm.) is herein defined as a predominantly shallow marine clastic deposit with subordinate carbonates overlying the Çamlıca metamorphic rocks, and passing laterally to the Soğucak Fm., a carbonate unit that is widely represented in the Thrace Basin. The record of alveolinids, primitive developmental stages of heterosteginids, and orthophragminids in the Şevketiye Fm. suggests that this formation is part of the Shallow Benthic Zones (SBZ) 16?/17 (Late Lutetian?/Early Bartonian), SBZ17?/18 and SBZ19A (Early Bartonian/earliest Priabonian). The Soğucak Fm., which overlies the Eocene volcanics, on the other hand, yielded advanced developmental stages of heterosteginids, Spiroclypeus sp. and Nummulites fabianii lineages, implying a younger marine incursion during the Late Eocene (earliest Priabonian; SBZ19A). A drastic shift in the depositional regime is marked amid Priabonian by the deposition of deep-marine clastics and volcanoclastics of the Ceylan Fm. In conclusion, the Eocene Sea transgressed first Gökçeada (in the Aegean Sea) during the Late Lutetian, then reached the Biga and Gelibolu peninsulas in the Bartonian, and finally led to the widespread deposition of carbonate and siliciclastic rocks in the Biga Peninsula and the Thrace Basin during the Late Bartonian and Priabonian

A computed tomography-based morphometric study of the styloid process

Background: The styloid process (SP) refers to a cylindrical piece projecting from the inferior of the temporal bone, situated anterior to the stylomastoid foramen. It is an anatomic formation close to major vessels and nerves, and its excessive elongation results in pathologies leading to anatomical disorders, such as Eagle’s syndrome. Several studies have been conducted on SP in relation to its close proximity to vessels and nerves, but there is no study that reveals its distance to important anatomical formations, such as the internal auditory meatus (IAM), carotid canal (CC), cochlea, tegmen tympani (TT) and tragus. In the current study, we aimed to investigate the incidence of Eagle’s syndrome based on morphometric measurements of SP. Materials and methods: The patient files archived in the Radiology Department of Adiyaman University Training and Research Hospital were retrospectively examined. The study was carried out on the data of patients for whom specialist radiologists found no pathology findings on the computed tomography images. A total of 77 individuals (36 females and 41 males) aged 22 to 54 years were included in the study. The length of SP and its distances to IAM, cochlea, CC, TT and tragus were obtained using computed tomography radiological measurements. Results: When the individual measurements performed on computed tomography images were evaluated in men and women, no significant difference was found concerning the distance between SP and various anatomic structures in close proximity to SP (p > 0.05). However, there was a statistically significant difference between the genders in length of the right SP (p = 0.003) and left SP (p = 0.006). Conclusions: This anthropometric study revealed the standard morphometric measurements of SP. We believe that the data obtained will help clinicians to identify and diagnose pathologies more easily

Path analyses of yield and some agronomic and quality traits of bread wheat (Triticum aestivum L.) under different environments

This research was conducted to determine characters effecting grain yield in fifty bread wheat (Triticum aestivum L.) cultivars and advanced lines by using simple correlation coefficient and path analysis under 2 locations (high rainfall and low rainfall; 745 and 506 mm, respectively). A total of 50 genotypes, 25 for each independent experiment, were tested for grain yield, test weight, 1000-kernel weight, Zeleny sedimentation, protein content and plant height. Grain yield was significantly correlated with plant height in high rainfall condition. It was significantly correlated with all components except Zeleny sedimentation and protein content in low rainfall condition. Results suggest  that plant height and test weight are primary selection criteria for improving grain yield in bread wheat in high and low rainfall conditions.Key words: Bread wheat, grain yield and components, correlation coefficient, path analyses

Structural, electronic and phononic properties of PtSe2: From monolayer to bulk

The layer dependent structural, electronic and vibrational properties of the 1T phase of two dimensional (2D) platinum diselenide are investigated by means of state-of-the-art first-principles calculations. The main findings of the study are: (i) monolayer platinum diselenide has a dynamically stable 2D octahedral structure with 1.66 eV indirect band gap, (ii) the semiconducting nature of 1T-PtSe2 monolayers remains unaffected even at high biaxial strains, (iii) top-to-top (AA) arrangement is found to be energetically the most favorable stacking of 1T-PtSe2 layers, (iv) the lattice constant (layer-layer distance) increases (decreases) with increasing number of layers, (v) while monolayer and bilayer 1T-PtSe2 are indirect semiconductors, bulk and few-layered 1T-PtSe2 are metals, (vi) Raman intensity and peak positions of the A1g and Eg modes are found to be highly dependent on the layer thickness of the material, hence; the number of layers of the material can be determined via Raman measurements.TUBITAK under the project number 117F09

Eltrombopag for the treatment of immune thrombocytopenia: The aegean region of Turkey experience

Objective: Immune thrombocytopenia (ITP) is an immune-mediated disease characterized by transient or persistent decrease of the platelet count to less than 100x109/L. Although it is included in a benign disease group, bleeding complications may be mortal. With a better understanding of the pathophysiology of the disease, thrombopoietin receptor agonists, which came into use in recent years, seem to be an effective option in the treatment of resistant cases. This study aimed to retrospectively assess the efficacy, long-term safety, and tolerability of eltrombopag in Turkish patients with chronic ITP in the Aegean region of Turkey. Materials and Methods: Retrospective data of 40 patients with refractory ITP who were treated with eltrombopag in the Aegean region were examined and evaluated. Results: The total rate of response was 87%, and the median duration of response defined as the number of the platelets being over 50x109/L was 19.5 (interquartile range: 5-60) days. In one patient, venous sinus thrombosis was observed with no other additional risk factors due to or related to thrombosis. Another patient with complete response and irregular follow-up for 12 months was lost due to sudden death as the result of probable acute myocardial infarction. Conclusion: Although the responses to eltrombopag were satisfactory, patients need to be monitored closely for overshooting platelet counts as well as thromboembolic events. © 2015 Turkish Society of Hematology. All rights reserved

Randomized clinical trial on the survival of lithium disilicate posterior partial restorations bonded using immediate or delayed dentin sealing after 3 years of function

Objectives: The survival and success rate and the quality of survival of partial ceramic restorations bonded employing Immediate (IDS) or Delayed Dentin Sealing (DDS) in vital molar teeth were evaluated in a randomized clinical trial with within-subject comparison study.Materials and methods: 30 patients received two lithium disilicate ceramic (IPS-e.max press, Ivoclar Vivadent) partial restorations on vital first or second molar teeth (N = 60). The two teeth randomly received either IDS (test group, n = 30) or DDS (control group, n = 30). Partial ceramic restorations were luted (Variolink Ultra, Ivoclar Vivadent) two weeks after preparation. Evaluations were performed at 1 week, 12 months and 36 months post-operatively, using qualitative (FDI) criteria. Representative failures were evaluated microscopically (SEM) and by means of simplified qualitative fractography analysis.Results: One absolute failure occurred in the DDS group due to (secondary) caries. The overall survival rate according to Kaplan-Meier after 3 years was 98.3% (FDI criteria score 1-4, n = 59) and the overall success rate was 85% (FDI criteria score 1-3, n = 51), with no significant difference between restorations in the IDS and DDS group (p = 0.32; Kaplan-Meier, Log Rank (Mantel-Cox), CI = 95%). For the quality of the survival, no statistically significant differences were found between IDS and DDS (p = 0.7; Kaplan-Meier, Log Rank (Mantel-Cox), CI = 95%) restorations on any follow-up timepoints for any of the FDI criteria (Wilcoxon, McNemar, p &gt; 0.05).Conclusion: Adhesively luted partial ceramic restorations in vital molar teeth have a good prognosis, however IDS did not show any differences in success and survival rates after 3 years of function.</p

Evaluation of Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Five Intraoral Scanners and Indirect Digitization.

The long-term success of ceramic laminate veneers (CLVs) is influenced by the marginal and internal fit of the restorations. However, studies comparing the fit of CLVs using different intraoral scanners or the indirect digitization technique are lacking. The purpose of this study was therefore to assess the marginal and internal fit of CAD/CAM-milled CLVs using different intraoral scanners and the indirect digitalization technique. An ivorine typodont maxillary left-central incisor was prepared; the tooth and the neighboring teeth were scanned and used as a template to print ninety 3D partial models. Thereafter, ceramic laminate veneers (CLVs) (N = 90) were milled from IPS-Emax CAD blocks and divided into six equal groups (15 specimens each) according to the type of intraoral scanner (IOS), as follows: Omnicam IOS, SC3600 IOS, Trios 3 IOS, Emerald IOS, I500 IOS. Fifteen further CLVs were fabricated using the conventional indirect digitalization technique. After cementation on the resin dies and embedding in clear epoxy resin, specimens were sectioned inciso-gingivally and mesio-distally. At the incisal and cervical positions, the marginal discrepancy was measured and evaluated in addition to the internal gap at six locations using SEM (200×). Differences between gap measurements among the six groups were determined using ANOVA. Games-Howell multiple comparisons for homogenous variances and LSD multiple comparisons for non-homogenous variances were used with 95% confidence intervals. The significance level was set at 0.05. The lowest mean absolute marginal gap at the incisal margins (AMGI) was recorded for Omnicam group (203.28 ± 80.14) µm, while the highest mean absolute marginal gap at the cervical margins (AMGC) was recorded for Omnicam group (147.16 ± 59.78) µm. The mean AMGC was reported to be significantly different between the conventional technique (146.75 ± 38.43) µm and Trios 3 (91.86 ± (35.51) µm; p = 0.001) and between Emerald (112.37 ± (50.31) µm; p = 0.042) and I500 (86.95 ± (41.55) µm; p 0.05). Marginal gaps were higher in the incisal region compared to the cervical region with both the indirect digitization technique and the IOSs. Ceramic laminate veneers (CLVs) fabricated using IOSs produced overall internal and marginal fit adaptation results comparable to CLVs fabricated from the indirect digitalization method, and both techniques produced clinically acceptable results