Pyometra presenting in conjunction with bowel cancer in a post-menopausal women: a case report

This case describes a 71 year old, post-menopausal woman who developed vaginal discharge. This complaint ultimately led to the discovery of bowel cancer in conjunction with a large sterile pyometra

Microstructural, Biomechanical, and In Vitro Studies of Ti-Nb-Zr Alloys Fabricated by Powder Metallurgy

Data Availability Statement: The data underpinning this publication can be accessed from Brunel University London’s data repository, Brunelfigshare here under a CCBY licence: https://doi.org/10.17633/rd.brunel.5446813.v1. Non-digital data supporting this study are stored by the corresponding author at Brunel University. Details of how to request access to these data are provided here: https://doi.org/10.17633/rd.brunel.5446813.v1.Supplementary Materials: The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/ma16124240/s1, Figure S1: Plasmid–DNA interaction assay for Ti-Nb-Zr based alloys. The migration pattern of plasmid DNA incubated with Ti-Nb-Zr-based alloys and TiRG4 reference materials is shown in the figure. The bands are labeled as NC: Nicked circular and SC: Supercoiled; ddH2O served as a negative control.Copyright © 2023 by the authors. This study investigated the microstructures, mechanical performances, corrosion resistances, and in vitro studies of porous Ti-xNb-10Zr (x: 10 and 20; at. %) alloys. The alloys were fabricated by powder metallurgy with two categories of porosities, i.e., 21–25% and 50–56%, respectively. The space holder technique was employed to generate the high porosities. Microstructural analysis was performed by using various methods including scanning electron microscopy, energy dispersive spectroscopy, electron backscatter diffraction, and x-ray diffraction. Corrosion resistance was assessed via electrochemical polarisation tests, while mechanical behavior was determined by uniaxial compressive tests. In vitro studies, such as cell viability and proliferation, adhesion potential, and genotoxicity, were examined by performing an MTT assay, fibronectin adsorption, and plasmid-DNA interaction assay. Experimental results showed that the alloys had a dual-phase microstructure composed of finely dispersed acicular hcp α-Ti needles in the bcc β-Ti matrix. The ultimate compressive strength ranged from 1019 MPa to 767 MPa for alloys with 21–25% porosities and from 173 MPa to 78 MPa for alloys with 50–56% porosities. Noted that adding a space holder agent played a more critical role in the mechanical behaviors of the alloys compared to adding niobium. The pores were largely open and exhibited irregular shapes, with uniform size distribution, allowing for cell ingrowth. Histological analysis showed that the alloys studied met the biocompatibility criteria required for orthopaedic biomaterial use.EPSRC Future LiME Hub (EP/N007638/1); PhD studentship, the Republic of Turkey Ministry of National Education

Assessing Microstructural, Biomechanical, and Biocompatible Properties of TiNb Alloys for Potential Use as Load-Bearing Implants

Data Availability Statement: The original contributions given in this work are included in the article, further inquiries can be directed to the corresponding authors.Titanium-Niobium (TiNb) alloys are commonly employed in a number of implantable devices, yet concerns exist regarding their use in implantology owing to the biomechanical mismatch between the implant and the host tissue. Therefore, to balance the mechanical performance of the load-bearing implant with bone, TiNb alloys with differing porosities were fabricated by powder metallurgy combined with spacer material. Microstructures and phase constituents were characterized with energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The mechanical properties were tested by uniaxial compression, and the corrosion performance was determined via a potentiodynamic polarization experiment. To evaluate a highly matched potential implant with the host, biocompatibilities such as cell viability and proliferation rate, fibronectin adsorption, plasmid-DNA interaction, and an SEM micrograph showing the cell morphology were examined in detail. The results showed that the alloys displayed open and closed pores with a uniform pore size and distribution, which allowed for cell adherence and other cellular activities. The alloys with low porosity displayed compressive strength between 618 MPa and 1295 MPa, while the alloys with high porosity showed significantly lower strength, ranging from 48 MPa to 331 MPa. The biological evaluation of the alloys demonstrated good cell attachment and proliferation rates.The EPSRC Future LiME Hub (EP/N007638/1); PhD studentship, the Republic of Turkey Ministry of National Education

Deciphering Drought Response Mechanisms: Transcriptomic Insights from Drought-Tolerant and Drought-Sensitive Wheat (Triticum aestivum L.) Cultivars

Drought stress poses a significant threat to wheat (Triticum aestivum L.) cultivation, necessitating an in-depth understanding of the molecular mechanisms underpinning drought response in both tolerant and sensitive varieties. In this study, 12 diverse bread wheat cultivars were evaluated for their drought stress responses, with particular emphasis on the contrasting performance of cultivars Atay 85 (sensitive), Gerek 79, and Mufitbey (tolerant). Transcriptomic analysis was performed on the root and leaf tissues of the aforementioned cultivars subjected to 4-hour and 8-hour drought stress and compared with controls. Differentially expressed genes (DEGs) were categorized based on their cellular component, molecular function, and biological function. Notably, there was greater gene expression variability in leaf tissues compared to root tissues. A noticeable trend of decreased gene expression was observed for cellular processes such as protein refolding and cellular metabolic processes like photorespiration as drought stress duration increased (8 hours) in the leaf tissues of drought-tolerant and sensitive cultivars. Metabolic processes related to gene expression were predominantly activated in response to 4-hour and 8-hour drought stress. The drought-tolerant cultivars exhibited increased expression levels of genes related to protein binding, metabolic processes, and cellular functions, indicating their ability to adapt better to drought stress compared to the drought-sensitive cultivar Atay 85. We detected more than 25 differentially expressed TFs in leaf tissues under 4-hour and 8-hour drought stress, while only 4 TFs were identified in the root tissues of sensitive cultivar. In contrast, the tolerant cultivar exhibited more than 80 different TF transcripts in both leaves and roots after 4 hours of drought stress, with this number decreasing to 18 after 8 hours of drought stress. Differentially expressed genes with a focus on metal ion binding, carbohydrate degradation, ABA-related genes, and cell wall-related genes were highlighted. Ferritin (TaFer), TaPME42 and Extensin-like protein (TaExLP), Germin-like protein (TaGLP 9-1), Metacaspase-5 (TaMC5), Arogenate Dehydratase 5 (ADT-5), Phosphoglycerate/ bisphosphoglycerate mutase (TaPGM), Serine/threonine protein phosphatase 2A (TaPP2A), GIGANTEA (TaGI), Polyadenylate-binding protein (TaRBP45B) exhibited differential expression by qRT-PCR in root and leaf tissues of tolerant and sensitive bread wheat cultivars. This study provides valuable insights into the complex molecular mechanisms associated with drought response in wheat, highlighting genes and pathways involved in drought tolerance. Understanding these mechanisms is essential for developing drought-tolerant wheat varieties, enhancing agricultural sustainability, and addressing the challenges posed by water scarcity

Use of complementary and alternative medicines by a sample of Turkish women for infertility enhancement: a descriptive study

<p>Abstract</p> <p>Background</p> <p>Infertility patients are a vulnerable group that often seeks a non-medical solution for their failure to conceive. World-wide, women use CAM for productive health, but only a limited number of studies report on CAM use to enhance fertility. Little is known about traditional and religious forms of therapies that are used in relation to conventional medicine in Turkey. We investigated the prevalence and types of complementary and alternative medicine (CAM) used by infertile Turkish women for fertility enhancement.</p> <p>Methods</p> <p>A face-to-face questionnaire inquiring demographic information and types of CAM used for fertility enhancement were completed by hundred infertility patients admitted to a primary care family planning centre in Van, Turkey between January and July 2009.</p> <p>Results</p> <p>The vast majority of infertile women had used CAM at least once for infertility. CAM use included religious interventions, herbal products and recommendations of traditional "hodja's" (faith healers). Of these women, 87.8% were abused in the last 12 months, 36.6% felt not being supported by her partner and 80.5% had never spoken with a physician about CAM.</p> <p>Conclusions</p> <p>Infertile Turkish women use complementary medicine frequently for fertility enhancement and are in need of information about CAM. Religious and traditional therapies are used as an adjunct to, rather than a substitute for, conventional medical therapy. Physicians need to approach fertility patients with sensitivity and should be able to council their patients about CAM accordingly.</p

Serum 25-hydroxyvitamin D is inversely associated with body mass index in cancer

<p>Abstract</p> <p>Background</p> <p>The association between vitamin D deficiency and obesity in healthy populations and different disease states remains unsettled with studies reporting conflicting findings. Moreover, current dietary recommendations for vitamin D do not take into account a person's body mass index (BMI). We investigated the relationship between serum 25-hydroxy-vitamin D [25(OH)D] and BMI in cancer.</p> <p>Methods</p> <p>A consecutive case series of 738 cancer patients. Serum 25(OH)D was measured at presentation to the hospital. The cohort was divided into 4 BMI groups (underweight: <18.5, normal weight: 18.5-24.9, overweight: 25-29.9, and obese: >30.0 kg/m²). Mean 25(OH)D was compared across the 4 BMI groups using ANOVA. Linear regression was used to quantify the relationship between BMI and 25(OH)D.</p> <p>Results</p> <p>303 were males and 435 females. Mean age at diagnosis was 55.6 years. The mean BMI was 27.9 kg/m²and mean serum 25(OH)D was 21.9 ng/ml. Most common cancers were lung (134), breast (131), colorectal (97), pancreas (86) and prostate (45). Obese patients had significantly lower serum 25(OH)D levels (17.9 ng/ml) as compared to normal weight (24.6 ng/ml) and overweight (22.8 ng/ml) patients; p < 0.001. After adjusting for age, every 1 kg/m²increase in BMI was significantly associated with 0.42 ng/ml decline in serum 25(OH)D levels.</p> <p>Conclusions</p> <p>Obese cancer patients (BMI >= 30 kg/m²) had significantly lower levels of serum 25(OH)D as compared to non-obese patients (BMI <30 kg/m²). BMI should be taken into account when assessing a patient's vitamin D status and more aggressive vitamin D supplementation should be considered in obese cancer patients.</p

Minimal information for studies of extracellular vesicles (MISEV2023): From basic to advanced approaches

© 2024 The Authors. Journal of Extracellular Vesicles, published by Wiley Periodicals, LLC on behalf of the International Society for Extracellular Vesicles. This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY), https://creativecommons.org/licenses/by/4.0/Extracellular vesicles (EVs), through their complex cargo, can reflect the state of their cell of origin and change the functions and phenotypes of other cells. These features indicate strong biomarker and therapeutic potential and have generated broad interest, as evidenced by the steady year-on-year increase in the numbers of scientific publications about EVs. Important advances have been made in EV metrology and in understanding and applying EV biology. However, hurdles remain to realising the potential of EVs in domains ranging from basic biology to clinical applications due to challenges in EV nomenclature, separation from non-vesicular extracellular particles, characterisation and functional studies. To address the challenges and opportunities in this rapidly evolving field, the International Society for Extracellular Vesicles (ISEV) updates its 'Minimal Information for Studies of Extracellular Vesicles', which was first published in 2014 and then in 2018 as MISEV2014 and MISEV2018, respectively. The goal of the current document, MISEV2023, is to provide researchers with an updated snapshot of available approaches and their advantages and limitations for production, separation and characterisation of EVs from multiple sources, including cell culture, body fluids and solid tissues. In addition to presenting the latest state of the art in basic principles of EV research, this document also covers advanced techniques and approaches that are currently expanding the boundaries of the field. MISEV2023 also includes new sections on EV release and uptake and a brief discussion of in vivo approaches to study EVs. Compiling feedback from ISEV expert task forces and more than 1000 researchers, this document conveys the current state of EV research to facilitate robust scientific discoveries and move the field forward even more rapidly.Peer reviewe

Minimal information for studies of extracellular vesicles (MISEV2023): From basic to advanced approaches

Extracellular vesicles (EVs), through their complex cargo, can reflect the state of their cell of origin and change the functions and phenotypes of other cells. These features indicate strong biomarker and therapeutic potential and have generated broad interest, as evidenced by the steady year-on-year increase in the numbers of scientific publications about EVs. Important advances have been made in EV metrology and in understanding and applying EV biology. However, hurdles remain to realising the potential of EVs in domains ranging from basic biology to clinical applications due to challenges in EV nomenclature, separation from non-vesicular extracellular particles, characterisation and functional studies. To address the challenges and opportunities in this rapidly evolving field, the International Society for Extracellular Vesicles (ISEV) updates its 'Minimal Information for Studies of Extracellular Vesicles', which was first published in 2014 and then in 2018 as MISEV2014 and MISEV2018, respectively. The goal of the current document, MISEV2023, is to provide researchers with an updated snapshot of available approaches and their advantages and limitations for production, separation and characterisation of EVs from multiple sources, including cell culture, body fluids and solid tissues. In addition to presenting the latest state of the art in basic principles of EV research, this document also covers advanced techniques and approaches that are currently expanding the boundaries of the field. MISEV2023 also includes new sections on EV release and uptake and a brief discussion of in vivo approaches to study EVs. Compiling feedback from ISEV expert task forces and more than 1000 researchers, this document conveys the current state of EV research to facilitate robust scientific discoveries and move the field forward even more rapidly