1,799 research outputs found
Fire Propagation Performance of Intumescent Fire Protective Coatings Using Eggshells as a Novel Biofiller
This paper aims to synthesize and characterize an effective intumescent fire protective coating that incorporates eggshell powder as a novel biofiller. The performances of thermal stability, char formation, fire propagation, water resistance, and adhesion strength of coatings have been evaluated. A few intumescent flame-retardant coatings based on these three ecofriendly fire retardant additives ammonium polyphosphate phase II, pentaerythritol and melamine mixed together with flame-retardant fillers, and acrylic binder have been prepared and designed for steel. The fire performance of the coatings has conducted employing BS 476: Part 6-Fire propagation test. The foam structures of the intumescent coatings have been observed using field emission scanning electron microscopy. On exposure, the coated specimens’ B, C, and D had been certified to be Class 0 due to the fact that their fire propagation indexes were less than 12. Incorporation of ecofriendly eggshell, biofiller into formulation D led to excellent performance in fire stopping (index value, (I)=4.3) and antioxidation of intumescent coating. The coating is also found to be quite effective in water repellency, uniform foam structure, and adhesion strength
A Computationally Efficient Method for Calculation of Strand Eddy Current Losses in Electric Machines
In this paper, a fast finite element (FE)-based method for the calculation of eddy current losses in the stator windings of randomly wound electric machines with a focus on fractional slot concentrated winding (FSCW) permanent magnet (PM) machines will be presented. The method is particularly suitable for implementation in large-scale design optimization algorithms where a qualitative characterization of such losses at higher speeds is most beneficial for identification of the design solutions which exhibit the lowest overall losses including the ac losses in the stator windings. Unlike the common practice of assuming a constant slot fill factor, sf, for all the design variations, the maximum sf in the developed method is determined based on the individual slot structure/dimensions and strand wire specifications. Furthermore, in lieu of detailed modeling of the conductor strands in the initial FE model, which significantly adds to the complexity of the problem, an alternative rectangular coil modeling subject to a subsequent flux mapping technique for determination of the impinging flux on each individual strand is pursued. The research focus of the paper is placed on development of a computationally efficient technique for the ac winding loss derivation applicable in design-optimization, where both the electromagnetic and thermal machine behavior are accounted for. The analysis is supplemented with an investigation on the influence of the electrical loading on ac winging loss effects for a particular machine design, a subject which has received less attention in the literature. Experimental ac loss measurements on a 12-slot 10-pole stator assembly will be discussed to verify the existing trends in the simulation results
Computationally Efficient Strand Eddy Current Loss Calculation in Electric Machines
A fast finite element (FE) based method for the calculation of eddy current losses in the stator windings of randomly wound electric machines is presented in this paper. The method is particularly suitable for implementation in large-scale design optimization algorithms where a qualitative characterization of such losses at higher speeds is most beneficial for identification of the design solutions that exhibit the lowest overall losses including the ac losses in the stator windings. Unlike the common practice of assuming a constant slot fill factor s f for all the design variations, the maximum s f in the developed method is determined based on the individual slot structure/dimensions and strand wire specifications. Furthermore, in lieu of detailed modeling of the conductor strands in the initial FE model, which significantly adds to the complexity of the problem, an alternative rectangular coil modeling subject to a subsequent flux mapping technique for determination of the impinging flux on each individual strand is pursued. Rather than pursuing the precise estimation of ac conductor losses, the research focus of this paper is placed on the development of a computationally efficient technique for the derivation of strand eddy current losses applicable in design optimization, especially where both the electromagnetic and thermal machine behavior are accounted for. A fractional-slot concentrated winding permanent magnet synchronous machine is used for the purpose of this study due to the higher slot leakage flux and slot opening fringing flux of such machines, which are the major contributors to strand eddy current losses in the windings. The analysis is supplemented with an investigation on the influence of the electrical loading on ac winding loss effects for this machine design, a subject that has received less attention in the literature. Experimental ac loss measurements on a 12-slot 10-pole stator assembly will be discussed to verify the existing trends in the simulation result
Development of Wireless Light Control System Based on Arduino and CC1101
The Internet of Things (IoT) drives the enhancement within Information and communication technology (ICT). It has been used to improve productivity, safety and quality of life. In recent years, smart home application has been applying the concept of IoT so that the users can remotely monitor their properties through internet network. In this paper, we designed and implemented a light controlling system via wireless sensor network using Arduino board and CC1101-chip, which supports the smart home application security systems. In order to solve the interconnection problem between wireless sensor network and the internet, a small solution for wireless light control system embedded with web server has been designed. The system should be able to convert user’s command into radio frequency and send to specific device linked to wireless sensor network. Overall, the design framework of the system was introduced and analyzed, which include the hardware design and software implementation. The hardware used in this paper includes the Arduino Uno R3, Arduino UNO R3, Arduino Nano, Arduino Ethernet Shield, CC1101-chip of Texas Instruments (TI) and relay. The software implemented is developed based on C++. Test results of this system showed that lights on the end device or node that connect to the wireless sensor network can be controlled by any web browser within local area network (LAN)
Protein mechanics probed using simple molecular models
Background: Single-molecule experimental techniques such as optical tweezers or atomic force microscopy are a direct probe of the mechanical unfolding/folding of individual proteins. They are also a means to investigate free energy landscapes. Protein force spectroscopy alone provides limited information; theoretical models relate measurements to thermodynamic and kinetic properties of the protein, but do not reveal atomic level information. By building a molecular model of the protein and probing its properties through numerical simulation, one can gauge the response to an external force for individual interatomic interactions and determine structures along the unfolding pathway. In combination, single-molecule force probes and molecular simulations contribute to uncover the rich behavior of proteins when subjected to mechanical force. Scope of review: We focus on how simplified protein models have been instrumental in showing how general properties of the free energy landscape of a protein relate to its response to mechanical perturbations. We discuss the role of simple protein models to explore the complexity of free energy landscapes and highlight important conceptual issues that more chemically accurate models with all-atom representations of proteins and solvent cannot easily address. Major conclusions: Native-centric, coarse-grained models, despite simplifications in chemical detail compared to all-atom models, can reproduce and interpret experimental results. They also highlight instances where the theoretical framework used to interpret single-molecule data is too simple. However, these simple models are not able to reproduce experimental findings where non-native contacts are involved. General significance: Mechanical forces are ubiquitous in the cell and it is increasingly clear that the way a protein responds to mechanical perturbation is important
Probabilistic evaluation of the seismic performance of a concrete highway bridge in Queensland
Being intraplate, the Australian continent has shown low seismicity in its recorded history. However, Australia has been acknowledged as not completely free from seismic hazard. Performance-based earthquake engineering (PBEE) methodology has been widely developed during the past two decades, and has become a key approach for seismic analysis and design. Yet such an approach has not been implemented in Australian structural codes. Therefore, further research is required to develop a domestic approach for Australian applications. In this study, the seismic capacity of a concrete highway bridge is evaluated through a probabilistic method. For this purpose, an analytical model of a typical highway bridge in Queensland was built in OpenSees. The important seismic responses to be considered include the curvature ductility of columns, and the deformations in bearings and abutments. The main uncertainties are related to the source and ground motion models for potential Australian earthquakes. A set of synthetic intraplate ground motions, which was provided by the GeoscienceAustralian, is anticipated to be used in the generation of future probabilistic ground motion maps for Australia, and is presently used for nonlinear incremental dynamic analyses (IDA). The results of this study in the form of seismic capacity limit-states can be further employed for developing performance-based seismic design and/or seismic risk and fragility analyses of Queensland highway bridges
Determination of the Energy Band Gap of Bi₂Se₃
Despite intensive investigations of Bi2Se3 in past few years, the size and nature of the bulk energy band gap of this well-known 3D topological insulator still remain unclear. Here we report on a combined magneto-transport, photoluminescence and infrared transmission study of Bi2Se3, which unambiguously shows that the energy band gap of this material is direct and reaches Eg = (220 ± 5) meV at low temperatures
James Webb Space Telescope (JWST) Integrated Science Instruments Module (ISIM) Cryo-Vacuum (CV) Test at GSFC
JWST ISIM has entered into its system-level testing program at NASA Goddard Space Flight Center (GSFC). In December 2013, ISIM successfully completed the first in a series of three cryo-vacuum tests, which included two flight science instruments. Since then, there have been full-fledged efforts towards the CV2 test scheduled to finish at the end of 2014. The complexity of the mission has generated challenging requirements that demand highly reliable system performance and capabilities from the Space Environment Simulator (SES) vacuum chamber. In order to satisfy the program requirements, GSFC had to develop unique structural and thermal hardware to test ISIM. Most noteworthy is a helium shroud structure and cooling system built in order to achieve operational temperatures below 20K (-253C). This paper: (1) provides an overview of the integrated mechanical and thermal facility systems required to achieve the objectives of JWST ISIM testing, (2) communicates the performance and challenges of the SES during the first ISIM test, and (3) summarizes the action plan to improve the system prior to the next test
Electron dynamics in topological insulator based semiconductor-metal interfaces (topological p-n interface based on Bi2Se3 class)
Single-Dirac-cone topological insulators (TI) are the first experimentally
discovered class of three dimensional topologically ordered electronic systems,
and feature robust, massless spin-helical conducting surface states that appear
at any interface between a topological insulator and normal matter that lacks
the topological insulator ordering. This topologically defined surface
environment has been theoretically identified as a promising platform for
observing a wide range of new physical phenomena, and possesses ideal
properties for advanced electronics such as spin-polarized conductivity and
suppressed scattering. A key missing step in enabling these applications is to
understand how topologically ordered electrons respond to the interfaces and
surface structures that constitute a device. Here we explore this question by
using the surface deposition of cathode (Cu/In/Fe) and anode materials (NO)
and control of bulk doping in BiSe from P-type to N-type charge
transport regimes to generate a range of topological insulator interface
scenarios that are fundamental to device development. The interplay of
conventional semiconductor junction physics and three dimensional topological
electronic order is observed to generate novel junction behaviors that go
beyond the doped-insulator paradigm of conventional semiconductor devices and
greatly alter the known spin-orbit interface phenomenon of Rashba splitting.
Our measurements for the first time reveal new classes of diode-like
configurations that can create a gap in the interface electron density near a
topological Dirac point and systematically modify the topological surface state
Dirac velocity, allowing far reaching control of spin-textured helical Dirac
electrons inside the interface and creating advantages for TI superconductors
as a Majorana fermion platform over spin-orbit semiconductors.Comment: 14 pages, 4 Figure
- …