Optimization of amino acid-stabilized erythropoietin parenteral formula: In vitro and in vivo assessment

The aim of this study was to optimize the formulation of erythropoietin (EPO) using amino acids instead of human serum albumin (HSA) and to evaluate its in vivo stability in order to avoid the risk of viral contamination and antigenicity. Different EPO formulas were developed in such a way was to allow studying the effects of amino acids and surfactants on the EPO stability profile. The main techniques applied for EPO analysis were ELISA, Bradford method, and SDS gel electrophoresis. The in vivo stability was evaluated in a Balb-c mouse animal model. The results showed that the presence of surfactant was very useful in preventing the initial adsorption of EPO on the walls of vials and in minimizing protein aggregation. Amino acid combinations, glycine with glutamic acid, provided maximum stability. Formulation F4 (containing glycine, glutamic acid and Tween 20) showed minimum aggregation and degradation and in vivo activity equivalent to commercially available HSA-stabilized EPO (Eprex®)

Modified geometry three-layered tablet as a platform for class II drugs zero-order release system

Purpose: To optimize a geometrical design of three-layered tablets for controlling the release of indomethacin (Ind) as a BCS class II model.Methods: The core formulation was optimized to ensure non-disintegrating tablet with a slow release behavior. Three-layered tablets were prepared by a single-step direct compression method by manual feeding of a hydrophobic layer in the bottom followed by Ind core layer and another hydrophobic layer at the top using 6 and 12 mm round compression sets. Four batches were prepared, differing only in either thickness of the drug layer or tablet diameter. A number of factors were studied, including tablet thickness to diameter ratio and drug layer surface area. The rate of Ind released was determined using USP dissolution apparatus I.Results: The optimum drug layer formulation contained Ind (40%), polyvinylpyrolidone K30 (40 %), and ethyl cellulose (20 %). The t50% (time taken for 50 % drug release) for the four three-layered tablet batches with varying diameter to thickness ratios were in the range of 1.5 to 3.7 h. The diameter to thickness ratios were in good correlation with % Ind release after 4 h (R2 = 0.94). It was found that all batches complied with zero order kinetic model.Conclusion: The new one-compression phase applied in this study is successful in producing threelayered tablets in a single-step with very good mechanical attributes. The approach of designing a controlled release tablet via control of the surface area of drug release is feasible for non-swelling matrices.Keywords: Controlled release, Indomethacin, BCS class II drugs, Ethyl cellulose, Release kinetics, Direct compressio

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Optimization of amino acid-stabilized erythropoietin parenteral formulation: In vitro and in vivo assessment

The aim of this study was to optimize the formulation of erythropoietin (EPO) using amino acids instead of human serum albumin (HSA) and to evaluate its in vivo stability in order to avoid the risk of viral contamination and antigenicity. Different EPO formulations were developed in such a way as to allow studying the effects of amino acids and surfactants on the EPO stability profile. The main techniques applied for EPO analysis were ELISA, Bradford method, and SDS gel electrophoresis. The in vivo stability was evaluated in a Balb-c mouse animal model. The results showed that the presence of surfactant was very useful in preventing the initial adsorption of EPO on the walls of vials and in minimizing protein aggregation. Amino acid combinations, glycine with glutamic acid, provided maximum stability. Formulation F4 (containing glycine, glutamic acid and Tween 20) showed minimum aggregation and degradation and in vivo activity equivalent to commercially available HSA-stabilized EPO (Eprex®)

Direct UPLC-MS-MS Validated Method for the Quantification of 5-Aminolevulinic Acid: Application to in-vitro Assessment of Colonic-Targeted Oral Tablets

A reliable, sensitive, specific, and rapid ultra-performance liquid chromatography-tandem mass spectrometric (UPLC-MS-MS) method was developed for the determination of 5-aminolevulinic acid (5-ALA) in orally-administered colonic delivery system. The prepared system is a compression-coated tablet using granulated chitosan as the coat layer. L-Tyrosine (TYR) was used as an internal standard with no need for derivatization. The chromatographic system consisted of Acquity UPLC BEH C18 column and isocratic mobile phase composed of acetonitrile and 0.1% formic acid with a flow rate of 2.5 min. The assay was based on ESI+ mode in a multiple reaction monitoring (MRM) transitions at m/z 132.08 > 86.0 and m/z 132.08 > 114.0 and m/z 182.1 > 91.2 for 5-ALA and TYR, respectively. Limit of quantification was 5.0 ng/mL and the calibration curve was linear (r(2) = 0.994). Within-run precision and between-run repeatability were expressed as relative standard deviation and were lower than 2.5%. The recoveries from control samples were > 95%. The method was successfully applied for evaluation in assay and release profile of 5-ALA colon targeted tablets media containing suspended rat cecal contents pH 6.8 medium (colonic) for colonic delivery

Celecoxib-Loaded Solid Lipid Nanoparticles for Colon Delivery: Formulation Optimization and In Vitro Assessment of Anti-Cancer Activity

This work aimed to optimize a celecoxib (CXB)-loaded solid lipid nanoparticles (SLN) colon delivery system for the enhancement of anticancer activity. An ultrasonic melt-emulsification method was employed in this work for the preparation of SLN. The physical attributes were characterized for their particle sizes, charges, morphology, and entrapment efficiency (%EE), in addition to DSC and FTIR. The in vitro drug release profiles were evaluated, and the anticancer activity was examined utilizing an MTT assay in three cancer cell lines: the colon cancer HT29, medulloblastoma Daoy, and hepatocellular carcinoma HepG2 cells. All of the prepared SLN formulations had nanoscale particle sizes ranging from 238 nm to 757 nm. High zeta-potential values (mv) within −30 s mv were reported. The %EE was in the range 86.76–96.6%. The amorphous nature of the SLN-entrapped CXB was confirmed from SLN DSC thermograms. The in vitro release profile revealed a slow constant rate of release with no burst release, which is unusual for SLN. Both the F9 and F14 demonstrated almost complete CXB release within 24 h, with only 25% completed within the first 5 h. F9 caused a significant percentage of cell death in the three cancer cell lines tested after 24 h of incubation and maintained this effect for 72 h. The prepared CXB-loaded SLN exhibited unique properties such as slow release with no burst and a high %EE. The anticancer activity of one formulation was extremely significant in all tested cancer cell lines at all incubation times, which is very promising

Optimization of 5-fluorouracil solid-lipid nanoparticles: a preliminary study to treat colon cancer

<p>Solid lipid nanoparticle (SLNs) formulae were utilized for the release of 5-fluorouracil (5-FU) inside the colonic medium for local treatment of colon cancer. SLNs were prepared by double emulsion-solvent evaporation technique (w/o/w) using triglyceride esters, Dynasan&#8482; 114 or Dynasan&#8482; 118 along with soyalecithin as the lipid parts. Different formulation parameters; including type of Dynasan, soyalicithin:Dynasan ratio, drug:total lipid ratio, and polyvinyl alcohol (PVA) concentration were studied with respect to particle size and drug entrapment efficiency. Results showed that formula 8 (F8) with composition of 20% 5-FU, 27% Dynasan&#8482; 114, and 53% soyalithicin and F14 (20% 5-FU, 27% Dynasan&#8482; 118, and 53% soyalithicin), which were stabilized by 0.5% PVA, as well as F10 with similar composition as F8 but stabilized by 2% PVA were considered the optimum formulae as they combined small particle sizes and relatively high encapsulation efficiencies. F8 had a particle size of 402.5 nm &#177; 34.5 with a polydispersity value of 0.005 and an encapsulation efficiency of 51%, F10 had a 617.3 nm &#177; 54.3 particle size with 0.005 polydispersity value and 49.1% encapsulation efficiency, whereas formula F14 showed a particle size of 343 nm &#177; 29 with 0.005 polydispersity, and an encapsulation efficiency of 59.09%. DSC and FTIR results suggested the existence of the lipids in the solid crystalline state. Incomplete biphasic prolonged release profile of the drug from The three formulae was observed in phosphate buffer pH 6.8 as well as simulated colonic medium containing rat caecal contents. A burst release with magnitudes of 26%, 32% and 28.8% cumulative drug released were noticed in the first hour samples incubated in phosphate buffer pH 6.8 for both F8, F10 and F14, respectively, followed by a slow release profile reaching 50%, 46.3% and 52% after 48 hours.</p