Design Optimization of a Concrete Face Rock-Fill Dam by Using Genetic Algorithm

This paper combined with the adaptive principle to improve the genetic algorithms (GA) and applied it to optimal design of the shape of the concrete face rock-fill dam (CFRD). Based on the improved GA, a mathematical model was established for the design optimization of CFRD. CFRD utilizes dam cost as objective function and dam slope and geometries of the dam material partition as design variables. Dam stability, stress, displacement, and stress level are used as the main condition constraints. The calculation procedures were prepared, and the GA was used to optimize the design of Jishixia CFRD. Results show that the GA could solve the global optimal solution problem of complex optimization design, such as the high degree of nonlinearity and the recessiveness of constraint conditions, and using the GA to optimize the CFRD design can reduce the quantities of projects and engineering safety costs

Single‐Cell Transcriptome Atlas and Regulatory Dynamics in Developing Cotton Anthers

Plant anthers are composed of different specialized cell types with distinct roles in plant reproduction. High temperature (HT) stress causes male sterility, resulting in crop yield reduction. However, the spatial expression atlas and regulatory dynamics during anther development and in response to HT remain largely unknown. Here, the first single‐cell transcriptome atlas and chromatin accessibility survey in cotton anther are established, depicting the specific expression and epigenetic landscape of each type of cell in anthers. The reconstruction of meiotic cells, tapetal cells, and middle layer cell developmental trajectories not only identifies novel expressed genes, but also elucidates the precise degradation period of middle layer and reveals a rapid function transition of tapetal cells during the tetrad stage. By applying HT, heterogeneity in HT response is shown among cells of anthers, with tapetal cells responsible for pollen wall synthesis are most sensitive to HT. Specifically, HT shuts down the chromatin accessibility of genes specifically expressed in the tapetal cells responsible for pollen wall synthesis, such as QUARTET 3 (QRT3) and CYTOCHROME P450 703A2 (CYP703A2), resulting in a silent expression of these genes, ultimately leading to abnormal pollen wall and male sterility. Collectively, this study provides substantial information on anthers and provides clues for heat‐tolerant crop creation

PL-011 Astaxanthin Reduces High Intensity Training Induced Myocardial Cell Apoptosis Via Activating Nrf2 in Rats

Objective Long-term intensive training may led to ischemia oxygen reaction and increase the ROS. Astaxanthin, as the super antioxidant, was investigated to against anti-oxidative stress. By supplementing the astaxanthin, we wanted to observe if it can mediated Nrf2 reduces myocardial cell oxidative injury in rats after high intensity training of 6 weeks.  Methods 7-week SD male rats were divided into 3 groups randomly: control group ( C group，n =10)，high intensity training group ( HT group，n = 15)，astaxanthin and high intensity training group (HTA group，n = 15) . The rats in HTA group were given with astaxanthin 20 mg /kg·d and in HT group were given with oil during the training day．The serum cTnI，myocardial apoptosis index,  the expression of myocardial BAX, Bcl2, Nrf2, HO-1, myocardial MDA，SOD and T- AOC activity were measured 24 hours after the last training． Results After 6-week tranning of high intensity, compared with group C, the serum cTNI, myocardial apoptosis index, the expression of BAX and myocardial MDA were significantly higher in group HT(P<0.01).The Bcl2/Bax, the expression of HO-1, SOD and T-AOC activity were significantly declined (P<0.01). After the intervention of 6-week astaxanthin, compared with group HT, the serum cTNI, myocardial MDA, the myocardial apoptosis index, the expression of BAX were significantly lower in HTA group (cTNI(ng/ml): 1.16±0.27 VS 2.47±0.39, P<0.05; myocardial apoptosis index: 164.27±3.98 VS 196.20±9.65, P<0.01; BAX: 58.40±5.95 VS 78.03±3.80, P<0.01 ). Finally, Bcl2/Bax, SOD, T-AOC activity, the expression of Nrf2 and HO-1 were significantly higher  (Bcl2/Bax : 1.92±0.10 VS 1.19±0.18, P<0.01; SOD(U/mg): 52.38±6.15 VS 38.32±3.36, P<0.01; T-AOC(U/mg): 30.22±4.07 VS 23.76±3.20, P<0.01; Nrf2: 93.61±8.53 VS 74.26±6.69, P<0.01; HO-1: 84.99±13.78 VS 64.22±11.39, P<0.05).  Conclusions The supplement of astaxanthin can mediate Nrf2 signaling pathway, and elevate the expression of Nrf2 and HO-1. Then it can increase the activity of SOD and T-AOC and reduce the myocardial oxidative level and myocardial apoptosis in rats caused by 6-week high intensity training. Finally, the structure and function of heart tissue are back to normal

Integrated Sr isotope variations and global environmental changes through the Late Permian to early Late Triassic

New 87Sr/86Sr data based on 127 well-preserved and well-dated conodont samples from South China were measured using a new technique (LA-MC-ICPMS) based on single conodont albid crown analysis. These reveal a spectacular climb in seawater 87Sr/86Sr ratios during the Early Triassic that was the most rapid of the Phanerozoic. The rapid increase began in Bed 25 of the Meishan section (GSSP of the Permian–Triassic boundary, PTB), and coincided closely with the latest Permian extinction. Modeling results indicate that the accelerated rise of 87Sr/86Sr ratios can be ascribed to a rapid increase (>2.8×) of riverine flux of Sr caused by intensified weathering. This phenomenon could in turn be related to an intensification of warming-driven runoff and vegetation die-off. Continued rise of 87Sr/86Sr ratios in the Early Triassic indicates that continental weathering rates were enhanced >1.9 times compared to those of the Late Permian. Continental weathering rates began to decline in the middle–late Spathian, which may have played a role in the decrease of oceanic anoxia and recovery of marine benthos. The 87Sr/86Sr values decline gradually into the Middle Triassic to an equilibrium values around 1.2 times those of the Late Permian level, suggesting that vegetation coverage did not attain pre-extinction levels thereby allowing higher runoff

H5N1 avian influenza re-emergence of Lake Qinghai: phylogenetic and antigenic analyses of the newly isolated viruses and roles of migratory birds in virus circulation

Highly pathogenic avian influenza H5N1 virus has swept west across the globe and caused serious debates on the roles of migratory birds in virus circulation since the first large-scale outbreak in migratory birds of Lake Qinghai, 2005. In May 2006, another outbreak struck Lake Qinghai and six novel strains were isolated. To elucidate these QH06 viruses, the six isolates were subjected to whole-genome sequencing. Phylogenetic analyses show that QH06 viruses are derived from the lineages of Lake Qinghai, 2005. Five of the six novel isolates are adjacent to the strain A/Cygnus olor/Croatia/1/05, and the last one is related to the strain A/duck/Novosibirsk/02/05, an isolate of the flyway. Antigenic analyses suggest that QH06 and QH05 viruses are similar to each other. These findings implicate that QH06 viruses of Lake Qinghai may travel back via migratory birds, though not ruling out the possibility of local circulation of viruses of Lake Qinghai

Characterization and gene expression patterns analysis implies BSK family genes respond to salinity stress in cotton

Identification, evolution, and expression patterns of BSK (BR signaling kinase) family genes revealed that BSKs participated in the response of cotton to abiotic stress and maintained the growth of cotton in extreme environment. The steroidal hormone brassinosteroids (BR) play important roles in different plant biological processes. This study focused on BSK which were downstream regulatory element of BR, in order to help to decipher the functions of BSKs genes from cotton on growth development and responses to abiotic stresses and lean the evolutionary relationship of cotton BSKs. BSKs are a class of plant-specific receptor-like cytoplasmic kinases involved in BR signal transduction. In this study, bioinformatics methods were used to identify the cotton BSKs gene family at the cotton genome level, and the gene structure, promoter elements, protein structure and properties, gene expression patterns and candidate interacting proteins were analyzed. In the present study, a total of 152 BSKs were identified by a genome-wide search in four cotton species and other 11 plant species, and phylogenetic analysis revealed three evolutionary clades. It was identified that BSKs contain typical PKc and TPR domains, the N-terminus is composed of extended chains and helical structures. Cotton BSKs genes show different expression patterns in different tissues and organs. The gene promoter contains numerous cis-acting elements induced by hormones and abiotic stress, the hormone ABA and Cold-inducing related elements have the highest count, indicating that cotton BSK genes may be regulated by various hormones at different growth stages and involved in the response regulation of cotton to various stresses. The expression analysis of BSKs in cotton showed that the expression levels of GhBSK06, GhBSK10, GhBSK21 and GhBSK24 were significantly increased with salt-inducing. This study is helpful to analyze the function of cotton BSKs genes in growth and development and in response to stress

Effect of Process Parameters and Layer Thickness on the Quality and Performance of Ti-6Al-4V Fabricated by Selective Laser Melting

To improve the quality of thick powder bed and realize the matching of thick powder bed and thin powder bed in the later stage, the influence of process parameters for the single-track, multi-layer fabrication, relative density, surface quality, defect, remelting, and boundary optimization performance of different layer thicknesses of Ti-6Al-4V fabricated by selective laser melting were investigated. It is more conducive to the stable forming of single-track when the point distance is half the diameter of the laser beam, and the exposure time is appropriately extended. The thin powder bed needs the corresponding point distance and exposure time under the laser power of 280–380 W to obtain high-density specimens. The thick powder bed needs to be able to ensure the formation of high-quality specimens under the smaller point distance and longer exposure time under higher laser power of 380 W. Both thick powder bed and thin powder bed will cause un-melted defects between molten pools, spheroidization defects caused by splashing, and microporous defects. The remelting process can significantly improve the surface quality of the formed specimen, but the surface quality of the thick powder bed is worse than that of the thin powder bed. The boundary quality of thick powder bed is worse than that of thin powder bed, and the boundary shape has a greater influence on the quality of the SLM forming boundary. Different strategies should be adopted to form the boundary of different shapes. Increasing the boundary count and increasing the laser power are more conducive to the improvement of boundary quality

Ultrasonic Measurement of Stress in SLM 316L Stainless Steel Forming Parts Manufactured Using Different Scanning Strategies

Selective Laser Melting (SLM) technology is a new kind of additive manufacturing technology developed in in the last decade. Measurement and control of stress in metal forming layer is the basic problem of SLM forming parts. Critical Refraction Longitudinal (LCR) wave method was used to measure stress. The acoustic-elastic formulas for measuring stresses in SLM 316L stainless steel forming parts manufactured using meander, stripe, and chess board scanning strategies, respectively, were established based on static load tensile test. The experimental results show that the acoustic time difference of LCR wave in SLM specimen manufactured with 316L stainless steel increases linearly with the increase of stress when the tensile stress is less than critical stress (372 MPa, 465 MPa, and 494 MPa). Due to the inhomogeneous deformation of the anisotropic SLM forming layer and the dimple-micropore aggregation fracture mechanism, the acousto-elastic curve fluctuates up and down along the irregular curve when the tensile stress is larger than critical stress. The results of corroboration experiments show that nondestructive measurement of stress in SLM forming specimen can be realized by using LCR wave method. The scanning strategy can significantly affect the tensile strength and yield strength of SLM forming specimen. The stresses were all in tension stress state at the edge of the specimens, whatever scanning strategy was used. Sub-area scanning and scanning sequence of alternate and intersect were adopted, which can effectively reduce the stress in the SLM forming specimen. The overall stress values of SLM forming specimen manufactured using chess board scanning strategy were smaller than that using meander and stripe strategies. The distribution of stress were more uniform