80 research outputs found
Regulation of ElectrodeâElectrolyte Interactions for Improved Heat Recovery of a Thermo-Induced Electric Double-Layer Capacitor
Skeletal camera network embedded structure-from-motion for 3D scene reconstruction from UAV images
Structure-from-Motion (SfM) techniques have been widely used for 3D scene reconstruction from multi-view images. However, due to the large computational costs of SfM methods there is a major challenge in processing highly overlapping images, e.g. images from unmanned aerial vehicles (UAV). This paper embeds a novel skeletal camera network (SCN) into SfM to enable efficient 3D scene reconstruction from a large set of UAV images. First, the flight control data are used within a weighted graph to construct a topologically connected camera network (TCN) to determine the spatial connections between UAV images. Second, the TCN is refined using a novel hierarchical degree bounded maximum spanning tree to generate a SCN, which contains a subset of edges from the TCN and ensures that each image is involved in at least a 3-view configuration. Third, the SCN is embedded into the SfM to produce a novel SCN-SfM method, which allows performing tie-point matching only for the actually connected image pairs. The proposed method was applied in three experiments with images from two fixed-wing UAVs and an octocopter UAV, respectively. In addition, the SCN-SfM method was compared to three other methods for image connectivity determination. The comparison shows a significant reduction in the number of matched images if our method is used, which leads to less computational costs. At the same time the achieved scene completeness and geometric accuracy are comparable
Integrated WiFi/PDR/Smartphone using an unscented Kalman filter algorithm for 3D indoor localization
Because of the high calculation cost and poor performance of a traditional planar map when dealing with complicated indoor geographic information, a WiFi fingerprint indoor positioning system cannot be widely employed on a smartphone platform. By making full use of the hardware sensors embedded in the smartphone, this study proposes an integrated approach to a three-dimensional (3D) indoor positioning system. First, an improved K-means clustering method is adopted to reduce the fingerprint database retrieval time and enhance positioning efficiency. Next, with the mobile phoneâs acceleration sensor, a new step counting method based on auto-correlation analysis is proposed to achieve cell phone inertial navigation positioning. Furthermore, the integration of WiFi positioning with Pedestrian Dead Reckoning (PDR) obtains higher positional accuracy with the help of the Unscented Kalman Filter algorithm. Finally, a hybrid 3D positioning system based on Unity 3D, which can carry out real-time positioning for targets in 3D scenes, is designed for the fluent operation of mobile terminals
Three-dimensional hollow urchin alpha-MnO2 for enhanced catalytic activity towards toluene decomposition in post-plasma catalysis
Acupuncture for Breast Cancer: A Systematic Review and Meta-Analysis of Patient-Reported Outcomes
AbstractThe present systematic review and meta-analysis was undertaken to evaluate the effects of acupuncture in women with breast cancer (BC), focusing on patient-reported outcomes (PROs).MethodsA comprehensive literature search was carried out for randomized controlled trials (RCTs) reporting PROs in BC patients with treatment-related symptoms after undergoing acupuncture for at least four weeks. Literature screening, data extraction, and risk bias assessment were independently carried out by two researchers.ResultsOut of the 2, 524 identified studies, 29 studies representing 33 articles were included in this meta-analysis. At the end of treatment (EOT), the acupuncture patientsâ quality of life (QoL) was measured by the QLQ-C30 QoL subscale, the Functional Assessment of Cancer Therapy-Endocrine Symptoms (FACT-ES), the Functional Assessment of Cancer TherapyâGeneral/Breast (FACT-G/B), and the Menopause-Specific Quality of Life Questionnaire (MENQOL), which depicted a significant improvement. The use of acupuncture in BC patients lead to a considerable reduction in the scores of all subscales of the Brief Pain Inventory-Short Form (BPI-SF) and Visual Analog Scale (VAS) measuring pain. Moreover, patients treated with acupuncture were more likely to experience improvements in hot flashes scores, fatigue, sleep disturbance, and anxiety compared to those in the control group, while the improvements in depression were comparable across both groups. Long-term follow-up results were similar to the EOT results.ConclusionsCurrent evidence suggests that acupuncture might improve BC treatment-related symptoms measured with PROs including QoL, pain, fatigue, hot flashes, sleep disturbance and anxiety. However, a number of included studies report limited amounts of certain subgroup settings, thus more rigorous, well-designed and larger RCTs are needed to confirm our results
Phenomenological Modeling of Deformation-Induced Anisotropic Hardening Behaviors: A Review
Numerous studies indicate that the hardening behaviors of materials are closely related to their deformation history. In the forming processes with loading path changes, such as sheet metal forming, anisotropic hardening behaviors are universally observed. In this situation, selecting or constructing a suitable anisotropic hardening model is essential. This paper presents a review of the phenomenological modeling of the deformation-induced anisotropic hardening behaviors. At the beginning, the deformation-induced hardening behaviors are introduced together with the relevant experiments. Different from other published review works, this paper is not laid out according to the description of a series of models. Instead, the modeling is emphasized by generalizing the main mathematical modeling ideas among various hardening models and sorting out the description methods for the decomposed anisotropic hardening behaviors. Some prospective development directions for the modeling of anisotropic hardening behaviors are suggested at the end of this work. This review work tries to provide the researchers with an instruction on how modeling for the anisotropic hardening behaviors according to the materials and forming processes
Wide baseline stereo matching based on scale invariant feature transformation with hybrid geometric constraints
Wide baseline stereo matching is a challenging task because of the presence of significant geometric deformations and illumination changes within the images. Based on the scale invariant feature transformation (SIFT) algorithm, this study proposes a new hybrid matching scheme that uses both the featureâbased and the areaâbased methods to find reliable matches from sparse to dense under different geometric constraints. Firstly, the authors propose a SIFTâbased robust weighted least squares matching (LSM) method modelled by a twoâdimensional (2D) projective transformation to establish the initial correspondences and their local homographies. In this method, a normalised cross correlation metric modified with an adaptive scale and an orientation of the SIFT features (SIFTâNCC) is proposed to find a good initial alignment for the SIFTâLSM. Secondly, a robust matching propagation using the SIFTâNCC starts from the initial matches under an epipolar geometry and the local homography constraints; geometrical consistency checking is used simultaneously to identify the false matches. Thirdly, they use an improved, featureâbased SIFT matching method to find the correspondences from the points that are not coplanar in the 3D space under an epipolar constraint only. A bidirectional selection strategy is used to remove the error matches
Improved WαSH Feature Matching Based on 2D-DWT for Stereo Remote Sensing Images
Image matching is an outstanding issue because of the existing of geometric and radiometric distortion in stereo remote sensing images. Weighted α-shape (WαSH) local invariant features are tolerant to image rotation, scale change, affine deformation, illumination change, and blurring. However, since the number of WαSH features is small, it is difficult to get enough matches to estimate the satisfactory homography matrix or fundamental matrix. In addition, the WαSH detector is extremely sensitive to image noise because it is built on sampled edges. Considering the shortcomings of the WαSH detector, this paper improves the WαSH feature matching method based on the 2D discrete wavelet transform (2D-DWT). The method firstly performs 2D-DWT on the image, and then detects WαSH features on the transformed images. According to the methods of descriptor construction for WαSH features, three matching methods on the basis of wavelet transform WαSH features (WWF), improved wavelet transform WαSH features (IWWF), and layered IWWF (LIWWF) are distinguished with respect to the character of the sub-images. The experimental results on the dataset containing affine distortion, scale distortion, illumination change, and noise images, showed that the proposed methods acquired more matches and better stableness than WαSH. Experimentation on remote sensing images with less affine distortion and slight noise showed that the proposed methods obtained the correct matching rate greater than 90%. For images containing severe distortion, KAZE obtained a 35.71% correct matching rate, which is unacceptable for calculating the homography matrix, while IWWF achieved a 71.42% correct matching rate. IWWF was the only method that achieved the correct matching rate of no less than 50% for all four test stereo remote sensing image pairs and was the most stable compared to MSER, DWT-MSER, WαSH, DWT-WαSH, KAZE, WWF, and LIWWF
Remote Sensing Image-Change Detection with Pre-Generation of Depthwise-Separable Change-Salient Maps
Remote sensing change detection (CD) identifies changes in each pixel of certain classes of interest from a set of aligned image pairs. It is challenging to accurately identify natural changes in feature categories due to unstructured and temporal changes. This research proposed an effective bi-temporal remote sensing CD comprising an encoder that could extract multiscale features, a decoder that focused on semantic alignment between temporal features, and a classification head. In the decoder, we constructed a new convolutional attention structure based on pre-generation of depthwise-separable change-salient maps (PDACN) that could reduce the attention of the network on unchanged regions and thus reduce the potential pseudo-variation in the data sources caused by semantic differences in illumination and subtle alignment differences. To demonstrate the effectiveness of the PDA attention structure, we designed a lightweight network structure for encoders under both convolution-based and transformer architectures. The experiments were conducted on a single-building CD dataset (LEVIR-CD) and a more complex multivariate change type dataset (SYSU-CD). The results showed that our PDA attention structure generated more discriminative change variance information while the entire network model obtained the best performance results with the same level of network model parameters in the transformer architecture. For LEVIR-CD, we achieved an intersection over union (IoU) of 0.8492 and an F1 score of 0.9185. For SYSU-CD, we obtained an IoU of 0.7028 and an F1 score of 0.8255. The experimental results showed that the method proposed in this paper was superior to some current state-of-the-art CD methods
Molecular Origin of Electric Double-Layer Capacitance at Multilayer Graphene Edges
Multilayer graphenes have been widely
used as active materials for electric double-layer capacitors (EDLCs),
where their numerous edges are demonstrated to play a crucial role
in charge storage. In this work, the interfacial structure and capacitive
behaviors of multilayer graphene edges with representative interlayer
spacing are studied via molecular dynamics (MD) simulations. Compared
with planar graphite surfaces, edges can achieve a 2-fold increase
in the specific capacitance at a wider interlayer spacing of âŒ5.0
Ă
. Unusually, the molecular origins for achieved charge storage
are predominantly attributed to the structural evolutions of solvents
occurring in the double layer, going beyond the traditional views
of regulating the capacitance by ion adsorption/separation. Specifically,
diverse ionic distributions exhibit similar screening ability and
EDLC thickness, while water molecules can counterbalance the interfacial
electric fields more effectively at edge site. The as-obtained findings
will be instructive in designing graphene-based EDLCs for advanced
capacitive performances
- âŠ