Rotation of the pinning direction in the exchange bias training effect in polycrystalline NiFe/FeMn bilayers

For polycrystalline NiFe/FeMn bilayers, we have observed and quantified the rotation of the pinning direction in the exchange bias training and recovery effects. During consecutive hysteresis loops, the rotation of the pinning direction strongly depends on the magnetization reversal mechanism of the ferromagnet layer. The interfacial uncompensated magnetic moment of antiferromagnetic grains may be irreversibly switched and rotated when the magnetization reversal process of the ferromagnet layer is accompanied by domain wall motion and domain rotation, respectively

Thermal properties of coal during low temperature oxidation using a grey correlation method

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.The low temperature oxidation of coal is a contradictory and unified dynamic process of coexisting mass and heat transfer. The thermophysical properties are crucial during coal spontaneous combustion. In the current paper, the variations of moisture, ash, volatiles, fixed carbon and thermophysical properties (thermal diffusivity, specific heat and thermal conductivity) of three coal samples from 30 °C to 300 °C were studied, and their grey correlation was analyzed. The results indicated that with the increase of temperature, the free moisture of Coals A and B decreased first but then increased, while the free moisture of Coal C kept decreasing without a later increase. The variation of surface moisture was consistent with that of free moisture. The trend of volatiles and fixed carbon was completely the opposite, showing a significant negative correlation. Ash was less affected by temperature. Along with the rise of temperature, the thermal diffusivity of three coal samples decreased first but later increased, and the specific heat was always in a state of increasing. The change in thermal conductivity was mainly affected by specific heat. By calculating the gray correlation degree, the major factors affecting the thermophysical properties were obtained

Simulation of reference crop evapotransiration in a plastic solar green house using a simplified energy balance approach

Proceedings of International conference on Agricultural and Biological Sciences (ABS 2015) held in Beijing, China on July 25-27, 2015With larger planting areas being used in greenhouses, evaluating crop evapotranspiration in a greenhouse has garnered greater attention. Currently, calculating the reference crop evapotranspiration for a greenhouse crop through using the Penman-Monteith formula recommended by FAO is difficult because the wind speed in a greenhouse is approximate zero. In order to calculate reference crop evapotranspiration in a greenhouse by the Penman-Monteith modified formula, a simplified model for calculating reference crop evapotranspiration in a greenhouse was proposed based on the energy balance equation, which was the correlative function between reference crop evapotranspiration and radiation and temperature. The model's parameters were obtained through meteorological data taken from the inside of a greenhouse in 2011. Then, the model was validated by using meteorological data within the greenhouse in 2012, and the fitted value of the model agreed with the calculated value of the formulas with a determination coefficient (R2) of 0.9554. This model is an easy means of calculating the reference crop evapotranspiration in a greenhouse because less meteorological factors are needed. Furthermore, the model provides a theoretical basis for crop irrigation in greenhouses

Characteristics of regional new particle formation in urban and regional background environments in the North China Plain

Long-term measurements of particle number size distributions were carried out both at an urban background site (Peking University, PKU) and a regional Global Atmospheric Watch station (Shangdianzi, SDZ) from March to November in 2008. In total, 52 new particle formation (NPF) events were observed simultaneously at both sites, indicating that this is a regional phenomenon in the North China Plain. On average, the mean condensation sink value before the nucleation events started was 0.025 s−1 in the urban environment, which was 1.6 times higher than that at regional site. However, higher particle formation and growth rates were observed at PKU (10.8 cm−3 s−1 and 5.2 nm h−1) compared with those at SDZ (4.9 cm−3 s−1 and 4.0 nm h−1). These results implied that precursors were much more abundant in the polluted urban environment. Different from the observations in cleaner environments, the background conditions of the observed particle homogeneous nucleation events in the North China Plain could be characterized as the co-existing of a stronger source of precursor gases and a higher condensational sink of pre-existing aerosol particles. Secondary aerosol formation following nucleation events results in an increase of particle mass concentration, particle light scattering coefficient, and cloud condensation nuclei (CCN) number concentration, with consequences on visibility, radiative effects, and air quality. Typical regional NPF events with significant particle nucleation rates and subsequent particle growth over a sufficiently long time period at both sites were chosen to investigate the influence of NPF on the number concentration of "potential" CCN. As a result, the NPF and the subsequent condensable growth increased the CCN number concentration in the North China Plain by factors in the range from 5.6 to 8.7. Moreover, the potential contribution of anthropogenic emissions to the CCN number concentration was more than 50%, to which more attention should be drawn in regional and global climate modeling, especially in the polluted urban areas

New mechanism and improved kinetics of hydrogen absorption and desorption of Mg(In) solid solution alloy milling with CeF 3

Abstract(#br)This paper presents improving the hydrogen absorption and desorption of Mg(In) solid solution alloy through doped with CeF 3 . A nanocomposite of Mg 0.95 In 0.05 -5 wt% CeF 3 was prepared by mechanical ball milling. The microstructures were systematically investigated by X-ray diffraction, scanning electron microscopy, scanning transmission electron microscopy. And the hydrogen storage properties were evaluated by isothermal hydrogen absorption and desorption, and pressure-composition-isothermal measurements in a temperature range of 230 °C–320 °C. The mechanism of hydrogen absorption and desorption of Mg 0.95 In 0.05 solid solution is changed by the addition of CeF 3 . Mg 0.95 In 0.05 -5 wt% CeF 3 nanocomposite transforms to MgH 2 , MgF 2 and intermetallic compounds of MgIn and CeIn 3 by hydrogenation. Upon dehydrogenation, MgH 2 reacts with the intermetallic compounds of MgIn and CeIn 3 forming a pseudo-ternary Mg(In, Ce) solid solution, which is a fully reversible reaction with a reversible hydrogen capacity～4.0 wt%. The symbiotic nanostructured CeIn 3 impedes the agglomeration of MgIn compound, thus improving the dispersibility of element In, and finally improving the reversibility of hydrogen absorption and desorption of Mg(In) solution alloy. For Mg 0.95 In 0.05 -5 wt% CeF 3 nanocomposite, the dehydriding enthalpy is reduced to about 66.1 ± 3.2 kJ⋅mol −1 ⋅H 2 , and the apparent activation energy of dehydrogenation is significantly lowered to 71.9 ± 10.0 kJ⋅mol −1 ⋅H 2 , a reduction of ～73 kJ⋅mol −1 ⋅H 2 relative to that for Mg 0.95 In 0.05 solid solution. As a result, Mg 0.95 In 0.05 -5 wt% CeF 3 nanocomposite can release ～57% H 2 in 10 min at 260 °C. The improvements of hydrogen absorption and desorption properties are mainly attributed to the reversible phase transition of Mg(In, Ce) solid solution combing with the multiphase nanostructure

Role of the IRS-1 and/or -2 in the pathogenesis of insulin resistance in Dahl salt-sensitive (S) rats

Insulin resistance is a common finding in hypertensive humans and animal models. The Dahl salt-sensitive (S) rat is an ideal model of genetically predetermined insulin resistance and salt-sensitive hypertension. Along the insulin signaling pathway, the insulin receptor substrates 1 and 2 (IRS-1 and -2) are important mediators of insulin signaling. IRS-1 and/or IRS-2 genetic variant(s) and/or enhanced serine phosphorylation correlate with insulin resistance. The present commentary was designed to highlight the significance of IRS-1 and/or -2 in the pathogenesis of insulin resistance. An emphasis will be given to the putative role of IRS-1 and/or -2 genetic variant(s) and serine phosphorylation in precipitating insulin resistance

First long-term study of particle number size distributions and new particle formation events of regional aerosol in the North China Plain

Atmospheric particle number size distributions (size range 0.003–10 μm) were measured between March 2008 and August 2009 at Shangdianzi (SDZ), a rural research station in the North China Plain. These measurements were made in an attempt to better characterize the tropospheric background aerosol in Northern China. The mean particle number concentrations of the total particle, as well as the nucleation, Aitken, accumulation and coarse mode were determined to be 1.2 ± 0.9 × 104, 3.6 ± 7.9 × 103, 4.4 ± 3.4 × 103, 3.5 ± 2.8 × 103 and 2 ± 3 cm−3, respectively. A general finding was that the particle number concentration was higher during spring compared to the other seasons. The air mass origin had an important effect on the particle number concentration and new particle formation events. Air masses from northwest (i.e. inner Asia) favored the new particle formation events, while air masses from southeast showed the highest particle mass concentration. Significant diurnal variations in particle number were observed, which could be linked to new particle formation events, i.e. gas-to-particle conversion. During particle formation events, the number concentration of the nucleation mode rose up to maximum value of 104 cm−3. New particle formation events were observed on 36% of the effective measurement days. The formation rate ranged from 0.7 to 72.7 cm−3 s−1, with a mean value of 8.0 cm−3 s−1. The value of the nucleation mode growth rate was in the range of 0.3–14.5 nm h−1, with a mean value of 4.3 nm h−1. It was an essential observation that on many occasions the nucleation mode was able to grow into the size of cloud condensation nuclei (CCN) within a matter of several hours. Furthermore, the new particle formation was regularly followed by a measurable increase in particle mass concentration and extinction coefficient, indicative of a high abundance of condensable vapors in the atmosphere under study

Genetic characterisation and cytological identification of a male sterile mutant in maize (Zea mays L.)

Male sterile mutants play an important role in the utilisation of crop heterosis. Male sterile plants were found in S5 generations of maize hybrid ZH2, through continuous sib-mating by using the fertile plants in the same population, we obtained a male sterile sibling population K932MS including sterile plants K932S and a fertile plant K932F. The objective of this study was to clarify the genetic characterisation and abortion characteristics by nucleus and cytoplasm effect analyses, cytoplasm grouping, and cytological observation. The results showed that no difference was found between K932S and K932F in the vegetative growth stage, but K932S had no emerging anther or pollen grains. The segregation ratio of fertile plants to sterile plants was 1:1 in the sibling progenies, while it was 3:1 in self-crossing progenies of K932F. The sterility of K932S could be restored among reciprocal progenies when seven normal inbred lines were used as females respectively. The fertility expression of K932S crossed with 30 testers would be changed in different test-crosses and some backcross progenies. The C-type restorer Zifeng-1 (Rf4Rf4) was able to restore the fertility of K932S, and the specific PCR amplification bands of K932MS were consistent with CMSCMo17. The anther of K932S began abortion at dyad with its tapetum expanded radically and vacuolated: this induced abnormality in the shapes of both dyads and tetrads. The microspore could not develop normally, and then it collapsed and gradually disappeared. Hence, K932MS is a C-type cytoplasmic male sterile mutant with a pollen-free, stable inheritance: it has potential application value for further research

Investigation of p-type depletion doping for InGaN/GaN-based light-emitting diodes

Due to the limitation of the hole injection, p-type doping is essential to improve the performance of InGaN/GaN multiple quantum well light-emitting diodes (LEDs). In this work, we propose and show a depletion-region Mg-doping method. Here we systematically analyze the effectiveness of different Mg-doping profiles ranging from the electron blocking layer to the active region. Numerical computations show that the Mg-doping decreases the valence band barrier for holes and thus enhances the hole transportation. The proposed depletion-region Mg-doping approach also increases the barrier height for electrons, which leads to a reduced electron overflow, while increasing the hole concentration in the p-GaN layer. Experimentally measured external quantum efficiency indicates that Mg-doping position is vitally important. The doping in or adjacent to the quantum well degrades the LED performance due to Mg diffusion, increasing the corresponding nonradiative recombination, which is well supported by the measured carrier lifetimes. The experimental results are well numerically reproduced by modifying the nonradiative recombination lifetimes, which further validate the effectiveness of our approach. � 2017 Author(s)