1,007 research outputs found
Photoluminescence of near-lattice-matched GaN/AlInN quantum wells grown on free-standing GaN and on sapphire substrates
Near-lattice-matched GaN/Al1−xInxN single quantum wells, grown using both free-standing GaN and conventional GaN-on-sapphire substrates, are studied by photoluminescence (PL) and PL excitation spectroscopies. PL spectra distinguish luminescence originating in the wells, barriers, and underlying GaN buffer layers. The spectra also reveal significant differences between structures grown simultaneously on the different substrates. The quantum well transition energy decreases as the well width increases due to the intense in-built electric fields, estimated to be 3.0±0.5 MeV/cm, that persist in strain free GaN/Al1−xInxN. Screening of these fields is studied using the excitation power dependence of the P
Metastable behavior of vortex matter in the electronic transport processes of homogenous superconductors
We study numerically the effect of vortex pinning on the hysteresis voltage-temperature (V-T) loop of vortex matter. It is found that different types of the V-T loops result from different densities of vortex pinning center. An anticlockwise V-T loop is observed for the vortex system with dense pinning centers, whereas a clockwise V-T loop is brought about for vortices with dilute pinning centers. It is shown that the size of the V-T loop becomes smaller for lower experimental speed, higher magnetic field, or weak pinning strength. Our numerical observation is in good agreement with experiments
Experiment study on overtopping of sloping breakwater by swell
Along with global climate changing, the disaster caused by overtopping from breakwater or revetment seems further serious. There are many factors which related with wave overtopping flux, one is wave period, some researches have big gap on it. Three formulas of overtopping flux were compared on wave period influence. Eight\ud
sections of single sloping breakwater without super structure were tested in wave flume. The overtopping was measured under different wave periods. The measured values were compared with calculation results. Wave run-up was calculated to analyze the difference of overtopping between measurement and calculation, and it showed that the cases which had much difference were splashing. The factor L/H was adopted to improve the existed formula as multiple
Thermal drying technologies : new developments and future R&D potential
Paper presented at the 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 1-4 July, 2007.Thermal dehydration processes are highly energy-intensive
and are found in almost all industrial sectors, accounting for 10
to 20 percent on national industrial energy consumption in
developed countries. With escalating energy costs and need to
mitigate environmental pollution due to emissions from
combustion of fossil fuels, it is increasingly important to
develop innovative drying technologies. Furthermore, drying
also affects quality of the dried product due to physical and/or
chemical transformations that may occur during the heat and
mass transfer operation. With tens of thousands of products that
are dried in hundreds of dryer types, it is a formidable task
indeed to develop design and scale-up procedures of wide
applicability. Attempts have been made over the past three
decades to make fundamental and applied contributions to
transport phenomena and material science aspects in drying of
various forms of wet solids, pastes and liquids. This
presentation will attempt to summarize the state-of-the-art as
far as theoretical understanding of drying processes and provide
examples of some new technologies being developed.
Opportunities for challenging fundamental and modeling
studies to enhance drying technologies will be identified.
Illustrative results will be presented to show how mathematical
modeling of spray, spouted bed and heat pump dryers can be
utilized to develop new conceptual designs and to optimize
operating conditions as a cost-effective route to intensify
innovation in thermal dryer design.cs201
Reoperation rates following intramedullary nailing versus external fixation of Gustilo Type 3A open tibia shaft fractures
Background: Open tibia fractures are among the most difficult to manage due to the lack of soft tissue coverage and poor blood supply. This is especially true in developing settings primarily due to a lack of resources. Both locked Intramedullary Nailing (IM) and External Fixation (EF) are two possible modalities for surgical treatment of open tibia fractures. However, it is unknown at this time which one is most suitable in low resource regions especially with regards to the risk of serious complications requiring reoperation. This study was conducted to identify which method is safest and minimizes this risk in patients with open tibia fractures.Methodology: A prospective cohort study of Gustilo 3A open tibia shaft factures treated either by intramedullary nailing or external fixation was conducted from March 2013 to February 2014 at Muhimbili Orthopaedic Institute (Dar es Salaam, Tanzania). Follow-up was conducted at 2, 6 10, 14, and 18 weeks postoperatively. The primary outcome assessed was all-cause reoperation.Results: Fifty patients were enrolled and completed follow-up at all-time points; twenty-six were treated with IM nail and twenty-four were treated by EF. There were 9 (37.5%) EF patients who required reoperation compared to 1(3.8%) IM nail patient (p=0.004). Reasons for reoperation among EF patients were infection (2 patients), malalignment (3 patients), and delayed union (4 patients). The one IM nail patient presented with signs of infection and wound dehiscence at 14 weeks postoperatively. No patients presented with hardware failure or malrotation.Conclusion: Treatment of Gustilo Type 3A open tibia shaft fractures with interlocking intramedullary nailing results in lower reoperation rate in the early stages of treatment compared to uniplanar external fixation.Keywords: Orthopaedic surgery, Tanzania, Intramedullary nail, External fixation, Open tibia fractur
Parameter estimation for VSI-Fed PMSM based on a dynamic PSO with learning strategies
© 1986-2012 IEEE.A dynamic particle swarm optimization with learning strategy (DPSO-LS) is proposed for key parameter estimation for permanent magnet synchronous machines (PMSMs), where the voltage-source inverter (VSI) nonlinearities are taken into account in the parameter estimation model and can be estimated simultaneously with other machine parameters. In the DPSO-LS algorithm, a novel movement modification equation with variable exploration vector is designed to effectively update particles, enabling swarms to cover large areas of search space with large probability and thus the global search ability is enhanced. Moreover, a Gaussian-distribution-based dynamic opposition-based learning strategy is developed to help the pBest jump out local optima. The proposed DPSO-LS can significantly enhance the estimator model accuracy and dynamic performance. Finally, the proposed algorithm is applied to multiple parameter estimation including the VSI nonlinearities of a PMSM. The performance of DPSO-LS is compared with several existing PSO algorithms, and the comparison results show that the proposed parameters estimation method has better performance in tracking the variation of machine parameters effectively and estimating the VSI nonlinearities under different operation conditions
Multi-neutron transfer coupling in sub-barrier 32S+90,96Zr fusion reactions
The role of neutron transfers is investigated in the fusion process below the
Coulomb barrier by analyzing 32S+90Zr and 32S+96Zr as benchmark reactions. A
full coupled-channel calculation of the fusion excitation functions has been
performed for both systems by using multi-neutron transfer coupling for the
more neutron-rich reaction. The enhancement of fusion cross sections for
32S+96Zr is well reproduced at sub-barrier energies by NTFus code calculations
including the coupling of the neutron-transfer channels following the Zagrebaev
semiclassical model. We found similar effects for 40Ca+90Zr and 40Ca+96Zr
fusion excitation functions.Comment: Minor corrections, 11 pages, 4 figures, Fusion11 Conference, Saint
Malo, France, 2-6 mai 201
Effect of Na doping on flux pinning of YBa1.9Na0.1Cu3O7-d
We have prepared Na-doped YBa2Cu3Oy (YBa1.9Na0.1Cu3Oy +40mol%Y211) (YBNCO)
and Na-free YBa2Cu3Oy (YBCO) samples by the Melt-Textured Growth (MTG) method
to study the effect of doped Na ion on flux pinning. The ac susceptibility
curves (acs) as well as the hysteresis loops were measured for the samples.
Then the effective pinning energy (U(T,Hdc,J)), irreversibility line (Hirr(T))
and critical current density (jc(Hdc)) were determined, where T, Hdc and J are
temperature, dc magnetic field and current density, respectively. We found
that, with Na doping, the Hirr(T) line shifted to lower temperature while the
Jc(Hdc) and U(T,Hdc,J) became smaller. It indicates that the Na ions play a
negative role in the flux pinning of YBCO. The appearance of the second peak in
the Jc(Hdc) curves and the enhancement of anisotropy in YBNCO further support
this finding.Comment: 7 pages, 7figures. Submited to Physica.
Effects of biofertilizer containing N-fixer, P and K solubilizers and AM fungi on maize growth: a greenhouse trial
Biofertilizer has been identified as an alternative to chemical fertilizer to increase soil fertility and crop production in
sustainable farming. The objective of this greenhouse study was to evaluate the effects of four biofertilizers containing an
arbuscular mycorrhizal fungus (Glomus mosseae or Glomus intraradices) with or without N-fixer (Azotobacter chroococcum),
P solubilizer (Bacillus megaterium) and K solubilizer (Bacillus mucilaginous) on soil properties and the growth of Zea mays.
The application treatments included control (no fertilizer), chemical fertilizer, organic fertilizer and two types of biofertilizer.
The application of biofertilizer containing mycorrhizal fungus and three species of bacteria significantly increased the growth of
Z. mays. The use of biofertilizer (G. mosseae and three bacterial species) resulted in the highest biomass and seedling height.
This greenhouse study also indicated that half the amount of biofertilizer application had similar effects when compared with
organic fertilizer or chemical fertilizer treatments. Microbial inoculum not only increased the nutritional assimilation of plant
(total N, P and K), but also improved soil properties, such as organic matter content and total N in soil. The arbuscular
mycorrhizal fungi (AMF) had a higher root infection rate in the presence of bacterial inoculation. By contrast, the AMF seemed
to have an inhibiting effect on the P-solubilizing bacteria. The nutrient deficiency in soil resulted in a larger population of Nfixing
bacteria and higher colonization of AMF
Hot air drying combined vacuum-filling nitrogen drying of apple slices: Drying characteristics and nutrients
[EN] In this paper, hot air drying (HAD) was applied when moisture content of apple slices range from 50% to 86%, and then vacuum-filling nitrogen drying (VFND) was used till moisture content reaching 7%. Results showed that, the drying rate of apple slice during VFND period increased with temperature increment and decreased with increment of slice thickness; compared to freezing dried samples, samples dried in this research were owned lower Vc and higher flavonoid; when HAD (70℃,3.0m/s)+VFND(relative pressure 0.08MPa, 50℃) and thickness of 6.0mm, nutrients reached better levels: retentions of Vc, total phenolics and flavonoid were 1.63mg/100g, 4.07mg/100g and 2.10mg/100g, respectively.The work was financially supported by the Fundamental Research Funds for the Central Universities of China (NO. GK201503072 and GK201601007).Huang, X.; Li, T.; Li, S.; Wu, Z.; Xue, J. (2018). Hot air drying combined vacuum-filling nitrogen drying of apple slices: Drying characteristics and nutrients. En IDS 2018. 21st International Drying Symposium Proceedings. Editorial Universitat Politècnica de València. 811-818. https://doi.org/10.4995/IDS2018.2018.7477OCS81181
- …