869 research outputs found
Growth and Development of Saline Seeps
The increase in dryland salinity or "saline seeps" in recent years has caused considerable concern to agriculturists in the Northern Great Plains. Aerial photography was used to show increases in salinity of five severely affected areas in Stark County, North Dakota
Bundap Marram Durn Durn: Engagement with Aboriginal women experiencing comorbid chronic physical and mental health conditions
OBJECTIVE: To explore antecedents of health service engagement and experience among urban Aboriginal people with comorbid physical and mental health conditions. METHODS: Focus groups and interviews were conducted with Aboriginal people who had comorbid health conditions and were accessing Aboriginal and/or mainstream services. RESULTS: Nineteen participants, all women, were recruited. Participants' personal histories and prior experience of health services affected effective service utilisation. Participants' service experiences were characterised by long waiting times in the public health system and high healthcare staff turnover. Trusted professionals were able to act as brokers to other clinically and culturally competent practitioners. CONCLUSIONS: Many urban Aboriginal women attended health services with multiple comorbid conditions including chronic disease and mental health issues. Several barriers and enablers were identified concerning the capacity of services to engage and effectively manage Aboriginal patients' condition
Soil resources and potential for agricultural development in Bahr El Jebel in southern Sudan, Jonglei Canal project area
The author has identified the following significant results. Fourteen LANDSAT scenes were used to produce mosaics of the 167, 474 sq km study area. These were black and white MSS 7 images and false color composite images. Five major soil-landscape units were delineated on the mosaics, and these were subdivided into a total of 40 soil mapping units. Aerial reconnaissance was useful in defining boundaries between mapping units and in estimating the proportion of the various soils which composed each mapping unit. Ground surveying permitted first-hand observation of major soils and sampling for quantitative laboratory analysis. Soil interpretations were made, including properties, potentials, and limitations
Mechanism by which shock wave lithotripsy can promote formation of human calcium phosphate stones
Human stone calcium phosphate (CaP) content correlates with higher urine CaP supersaturation (SS) and urine pH as well as with the number of shock wave lithotripsy (SWL) treatments. SWL does damage medullary collecting ducts and vasa recta, sites for urine pH regulation. We tested the hypothesis that SWL raises urine pH and therefore Cap SS, resulting in CaP nucleation and tubular plugging. The left kidney (T) of nine farm pigs was treated with SWL, and metabolic studies were performed using bilateral ureteral catheters for up to 70 days post-SWL. Some animals were given an NH4Cl load to sort out effects on urine pH of CD injury vs. increased HCO3 (-) delivery. Histopathological studies were performed at the end of the functional studies. The mean pH of the T kidneys exceeded that of the control (C) kidneys by 0.18 units in 14 experiments on 9 pigs. Increased HCO3 (-) delivery to CD is at least partly responsible for the pH difference because NH4Cl acidosis abolished it. The T kidneys excreted more Na, K, HCO3 (-), water, Ca, Mg, and Cl than C kidneys. A single nephron site that could produce losses of all of these is the thick ascending limb. Extensive injury was noted in medullary thick ascending limbs and collecting ducts. Linear bands showing nephron loss and fibrosis were found in the cortex and extended into the medulla. Thus SWL produces tubule cell injury easily observed histopathologically that leads to functional disturbances across a wide range of electrolyte metabolism including higher than control urine pH
Recommended from our members
Finite element analysis of titanium alloy-graphene based mandible plate
Titanium alloy based maxillofacial plates and implants are widely used in fracture treatment and reconstructions. Filler materials Graphene Nanoplatlets(GNPs) were used in a Titanium alloy maxillofacial plate and a Finite Element Model (FEM) was designed to reconstruct a fractured human mandible. Both 50N and 500N bite forces were applied on the mandible and stress distribution using Von mises failure theory across the plate sections was analyzed. A pure plate was critically stressed at a section near the mandible fracture region for a Von mises stress of nearly 27.5GPa while this stress reduced by nearly 10–22% with the presence of minor composition of GNPs in the plate. GNPs orientation in parallel (21.1 GPa) to the plate axis were more effective in comparison to other orientations(90°, 45° and 135°) and the location variation of these GNPs along the plate had no significant effect on the stress distribution. The fatigue analyses showed that, under these stresses and forces the plate with GNP was able to endure for nearly 7000 days, while the pure Titanium plate could fail by fatigue in approximately 70 days. Hence, presence of minor compositions of GNPs could enhance endurance life of the Titanium plate by reducing stress concentrations at critical sections of the plate
A decade of acoustic thermometry in the North Pacific Ocean
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94643/1/jgrc11250.pd
Measurement of the rare decay pi0 -> e+ e-
The branching ratio of the rare decay pi0 -> e+ e- has been measured
precisely, using the complete data set from the KTeV E799-II experiment at
Fermilab. We observe 794 candidate pi0 -> e+ e- events using K0_L -> 3pi0 as a
source of tagged pi0's. The expected background is 52.7 +- 11.2 events,
predominantly from high e+ e- mass pi0 -> e+ e- gamma decays. We have measured
B[(pi0 -> e+ e-), (m_e+e-/m_pi0)^2 > 0.95] = 6.44 +- 0.25(stat) +- 0.22(syst)
x10^(-8), which is above the unitary bound from pi0 -> gamma gamma and within
the range of theoretical expectations from the standard model.Comment: 6 pages, 4 figure
Cascade and anti-Cascade Polarization Measurements at 800 GeV/c
The polarization of neutral Cascade and anti-Cascade hyperons produced by 800
GeV/c protons on a BeO target at a fixed targeting angle of 4.8 mrad is
measured by the KTeV experiment at Fermilab. Our result of 9.7% for the neutral
Cascade polarization shows no significant energy dependence when compared to a
result obtained at 400 GeV/c production energy and at twice our targeting
angle. The polarization of the neutral anti-Cascade is measured for the first
time and found to be consistent with zero. We also examine the dependence of
polarization on transverse production momentum.Comment: 4 page PR
Measurement of Direct Emission in the KL->pi+pi-gamma Decay Mode
In this paper the KTeV collaboration reports the analysis of 112.1*10^3
candidate KL->pi+pi-gamma decays including a background of 671+/-41 events with
the objective of determining the photon production mechanisms intrinsic to the
decay process. These decays have been analyzed to extract the relative
contributions of the CP violating bremsstrahlung process and the CP conserving
M1 and CP violating E1 direct photon emission processes. The M1 direct photon
emission amplitude and its associated vector form factor parameterized as
|g_M1|(1+ (a_1/a_2)/(M(rho)^2-M(K)^2+2M(K)*E(gamma)) have been measured to be
|g_M1|=1.198 +/- 0.035(stat) +/- 0.086(syst) and a_1/a_2 = -0.738 +/-
0.007(stat) +/- 0.018 (syst) GeV^2/c^2 respectively. An upper limit for the CP
violating E1 direct emission amplitude |g_E1| < 0.21 (90% CL) has been found.
The overall ratio of direct photon emission (DE) to total photon emission
including the bremsstrahlung process (IB) has been determined to be DE/(DE +IB)
= 0.689 +/- 0.021 for E(gamma) > 20 MeV.Comment: REVTeX 3.1, 4 pages, 4 figures submitted to Physical Review Letter
Recommended from our members
Low cost, user friendly embedded machine vision system implementation for high-speed industrial manufacture
The future of manufacturing environments is becoming increasingly intelligent. With Industry 4.0, and lean production strategies, many manufacturers are considering investing in intelligent, real time, and non-destructive machine vision (MV) systems for product manufacture fault analysis [2]. This technology is improving rapidly in both the industrial and consumer sectors [3]. This work presents the development of a low cost, user friendly embedded machine vision system for use in industrial snack manufacturing. Previous attempts at using a high cost ~£10000 system failed, due to inadequate knowledge for successful integration. The OpenMV cam M7 was procured as a low cost ~£100, simpler alternative. The system achieved 88% ±1% sensitivity and precision in detecting products on a live production line. Therefore this is a viable prototyping option for machine vision novices, enabling informed decisions thereafter
- …