Metal-Assisted Hydrolysis Reactions Involving Lipids: A Review

This report covers major advances in the use of metal ions and complexes to hydrolyze ester and phosphate ester lipid bonds. These metal-based Lewis acids have been investigated as catalysts to isolate fatty acids from biological sources, as probes to study phospholipid bilayer properties, as tools to examine signal transduction pathways, and as lead compounds toward the discovery of therapeutic agents. Metal ions that accelerate phosphate ester hydrolysis under mild conditions of temperature and pH may have the potential to mimic phospholipase activity in biochemical applications

Metal-Assisted Hydrolysis Reactions Involving Lipids: A Review

This report covers major advances in the use of metal ions and complexes to hydrolyze ester and phosphate ester lipid bonds. These metal-based Lewis acids have been investigated as catalysts to isolate fatty acids from biological sources, as probes to study phospholipid bilayer properties, as tools to examine signal transduction pathways, and as lead compounds toward the discovery of therapeutic agents. Metal ions that accelerate phosphate ester hydrolysis under mild conditions of temperature and pH may have the potential to mimic phospholipase activity in biochemical applications

Anti-tumour necrosis factor therapy for Dupuytren's Disease: a randomised dose response proof of concept phase 2a clinical trial

Background Dupuytren's disease is a common fibrotic condition of the hand that causes irreversible flexion contractures of the fingers, with no approved therapy for early stage disease. Our previous analysis of surgically-excised tissue defined tumour necrosis factor (TNF) as a potential therapeutic target. Here we assessed the efficacy of injecting nodules of Dupuytren's disease with a TNF inhibitor. Methods Patients were randomised to receive adalimumab on one occasion in dose cohorts of 15 mg in 0.3 ml, 35 mg in 0.7 ml, or 40 mg in 0.4 ml, or an equivalent volume of placebo in a 3:1 ratio. Two weeks later the injected tissue was surgically excised and analysed. The primary outcome measure was levels of mRNA expression for α-smooth muscle actin (ACTA2). Secondary outcomes included levels of α-SMA and collagen proteins. The trial was registered with ClinicalTrial.gov (NCT03180957) and the EudraCT (2015-001780-40). Findings We recruited 28 patients, 8 assigned to the 15 mg, 12 to the 35 mg and 8 to the 40 mg adalimumab cohorts. There was no change in mRNA levels for ACTA2, COL1A1, COL3A1 and CDH11. Levels of α-SMA protein expression in patients treated with 40 mg adalimumab (1.09 ± 0.09 ng per μg of total protein) were significantly lower (p = 0.006) compared to placebo treated patients (1.51 ± 0.09 ng/μg). The levels of procollagen type I protein expression were also significantly lower (p < 0.019) in the sub group treated with 40 mg adalimumab (474 ± 84 pg/μg total protein) compared with placebo (817 ± 78 pg/μg). There were two serious adverse events, both considered unrelated to the study drug. Interpretation In this dose-ranging study, injection of 40 mg of adalimumab in 0.4 ml resulted in down regulation of the myofibroblast phenotype as evidenced by reduction in expression of α-SMA and type I procollagen proteins at 2 weeks. These data form the basis of an ongoing phase 2b clinical trial assessing the efficacy of intranodular injection of 40 mg adalimumab in 0.4 ml compared to an equivalent volume of placebo in patients with early stage Dupuytren's disease

Towards the prediction of antimicrobial efficacy for hydrogen bonded, self-associating amphiphiles

Herein, we report 50 structurally related supramolecular self-associating amphiphilic (SSA) salts and related compounds. These SSAs are shown to act as antimicrobial agents, active against model Gram-positive (Methicillin-Resistant Staphylococcus aureus) and/or Gram-negative (Escherichia coli) bacteria of clinical interest. Through a combination of solution state, gas phase, solid state and in silico measurements we determine 14 different physicochemical parameters for each of these 50 structurally related compounds. These parameter sets are then used to identify molecular structure – physicochemical property – antimicrobial activity relationships for our model Gram-negative and Gram-positive bacteria, while simultaneously providing insight towards the elucidation of SSA mode of antimicrobial action

Characterization of subsurface media from locations up- and down-gradient of a uranium-contaminated aquifer.

The processing of sediment to accurately characterize the spatially-resolved depth profiles of geophysical and geochemical properties along with signatures of microbial density and activity remains a challenge especially in complex contaminated areas. This study processed cores from two sediment boreholes from background and contaminated core sediments and surrounding groundwater. Fresh core sediments were compared by depth to capture the changes in sediment structure, sediment minerals, biomass, and pore water geochemistry in terms of major and trace elements including pollutants, cations, anions, and organic acids. Soil porewater samples were matched to groundwater level, flow rate, and preferential flows and compared to homogenized groundwater-only samples from neighboring monitoring wells. Groundwater analysis of nearby wells only revealed high sulfate and nitrate concentrations while the same analysis using sediment pore water samples with depth was able to suggest areas high in sulfate- and nitrate-reducing bacteria based on their decreased concentration and production of reduced by-products that could not be seen in the groundwater samples. Positive correlations among porewater content, total organic carbon, trace metals and clay minerals revealed a more complicated relationship among contaminant, sediment texture, groundwater table, and biomass. The fluctuating capillary interface had high concentrations of Fe and Mn-oxides combined with trace elements including U, Th, Sr, Ba, Cu, and Co. This suggests the mobility of potentially hazardous elements, sediment structure, and biogeochemical factors are all linked together to impact microbial communities, emphasizing that solid interfaces play an important role in determining the abundance of bacteria in the sediments

Evaluating various composite sampling modes for detecting pathogenic SARS-CoV-2 virus in raw sewage

Inadequate sampling approaches to wastewater analyses can introduce biases, leading to inaccurate results such as false negatives and significant over- or underestimation of average daily viral concentrations, due to the sporadic nature of viral input. To address this challenge, we conducted a field trial within the University of Tennessee residence halls, employing different composite sampling modes that encompassed different time intervals (1 h, 2 h, 4 h, 6 h, and 24 h) across various time windows (morning, afternoon, evening, and late-night). Our primary objective was to identify the optimal approach for generating representative composite samples of SARS-CoV-2 from raw wastewater. Utilizing reverse transcription-quantitative polymerase chain reaction, we quantified the levels of SARS-CoV-2 RNA and pepper mild mottle virus (PMMoV) RNA in raw sewage. Our findings consistently demonstrated that PMMoV RNA, an indicator virus of human fecal contamination in water environment, exhibited higher abundance and lower variability compared to pathogenic SARS-CoV-2 RNA. Significantly, both SARS-CoV-2 and PMMoV RNA exhibited greater variability in 1 h individual composite samples throughout the entire sampling period, contrasting with the stability observed in other time-based composite samples. Through a comprehensive analysis of various composite sampling modes using the Quade Nonparametric ANCOVA test with date, PMMoV concentration and site as covariates, we concluded that employing a composite sampler during a focused 6 h morning window for pathogenic SARS-CoV-2 RNA is a pragmatic and cost-effective strategy for achieving representative composite samples within a single day in wastewater-based epidemiology applications. This method has the potential to significantly enhance the accuracy and reliability of data collected at the community level, thereby contributing to more informed public health decision-making during a pandemic

Education in Process Systems Engineering: Why it matters more than ever and how it can be structured

This position paper is an outcome of discussions that took place at the third FIPSE Symposium in Rhodes, Greece, between June 20–22, 2016 (http://fi-in-pse.org). The FIPSE objective is to discuss open research challenges in topics of Process Systems Engineering (PSE). Here, we discuss the societal and industrial context in which systems thinking and Process Systems Engineering provide indispensable skills and tools for generating innovative solutions to complex problems. We further highlight the present and future challenges that require systems approaches and tools to address not only ‘grand’ challenges but any complex socio-technical challenge. The current state of Process Systems Engineering (PSE) education in the area of chemical and biochemical engineering is considered. We discuss approaches and content at both the unit learning level and at the curriculum level that will enhance the graduates’ capabilities to meet the future challenges they will be facing. PSE principles are important in their own right, but importantly they provide significant opportunities to aid the integration of learning in the basic and engineering sciences across the whole curriculum. This fact is crucial in curriculum design and implementation, such that our graduates benefit to the maximum extent from their learning

Calmodulin-like proteins localized to the conoid regulate motility and cell invasion by Toxoplasma gondii

Toxoplasma gondii contains an expanded number of calmodulin (CaM)-like proteins whose functions are poorly understood. Using a combination of CRISPR/Cas9-mediated gene editing and a plant-like auxin-induced degron (AID) system, we examined the roles of three apically localized CaMs. CaM1 and CaM2 were individually dispensable, but loss of both resulted in a synthetic lethal phenotype. CaM3 was refractory to deletion, suggesting it is essential. Consistent with this prediction auxin-induced degradation of CaM3 blocked growth. Phenotypic analysis revealed that all three CaMs contribute to parasite motility, invasion, and egress from host cells, and that they act downstream of microneme and rhoptry secretion. Super-resolution microscopy localized all three CaMs to the conoid where they overlap with myosin H (MyoH), a motor protein that is required for invasion. Biotinylation using BirA fusions with the CaMs labeled a number of apical proteins including MyoH and its light chain MLC7, suggesting they may interact. Consistent with this hypothesis, disruption of MyoH led to degradation of CaM3, or redistribution of CaM1 and CaM2. Collectively, our findings suggest these CaMs may interact with MyoH to control motility and cell invasion

Using mid infrared to perform investigations beyond the diffraction limits of microcristalline pathologies: advantages and limitation of Optical PhotoThermal IR spectroscopy

Understanding the physico-chemistry related to cristalline pathologies constitutes a challenge in several medical specialities such as nephrology, dermatology or oncology. Regarding nephrology, the chemical diversity of concretions such as kidney stones calls for characterization techniques to determine the chemical composition of concretions. The starting point of this contribution is given by Fourier Transform InfraRed (FTIR) spectroscopy which is routinely used at the hospital to determine the chemical composition of kidney stones as well as ectopic calcifications present in kidney biopsy. For kidney stones, the quantity of sample is sufficient to perform a significant analysis through classical FTIR. For ectopic calcifications, $\mu$FTIR can be inefficient in the case of $\mu$calcification in the tissue when their size is less than 10 $\mu$m. For such samples, Optical PhotoThermal IR (OPT-IR) spectroscopy may constitute a way to overcome this experimental difficulty through the acquisition of IR spectrum with a spatial resolution close to 500 nm.To illustrate such opportunity, we first compare the IR spectrum acquired with a classical experimental set-up related to classical IR spectroscopy to IR spectrum collected with a OPT-IR one for different compounds namely calcium oxalate monohydrate, calcium oxalate dehydrate, calcium phosphate apatite and magnesium ammonium phosphate hexahydrate. Such comparison helps us to assess specificity of OPT-IR. Then, we consider several pathological calcifications associated to hyperoxaluria, adenine phosphoribosyltransferase (APRT) deficiency or the presence of Randall’s plaque. We will see that the nanometer spatial resolution constitutes a major advantage versus a micrometre one. Also, in the case of Randall’s plaque, we show that OPT-IR can determine the chemical composition of microscopic concretion without any kind of preparation. Such experimental fact is clearly a major advantage. Finally, we also extended this first investigation in nephrology by considering breast calcifications. In that case, if the number of chemical phases is quite low compared to the number of chemical phases identified in ectopic calcifications present in kidney (four instead of 24), the challenge is related to the possibility to distinguish between the different calcium phosphate namely amorphous carbonated calcium phosphate, CA and whitlockite.The complete set of data indicates the limitations and the advantages of OPT-IR spectroscopy