Statistical similarity between the compression of a porous material and earthquakes

It has been long stated that there are profound analogies between fracture experiments and earthquakes; however, few works attempt a complete characterization of the parallelisms between these so separate phenomena. We study the Acoustic Emission events produced during the compression of Vycor (SiO2). The Gutenberg-Richter law, the modified Omori's law, and the law of aftershock productivity are found to hold for a minimum of 5 decades, are independent of the compression rate, and keep stationary for all the duration of the experiments. The waiting-time distribution fulfills a unified scaling law with a power-law exponent close to 2.45 for long times, which is explained in terms of the temporal variations of the activity rate.Comment: 4 pages and a bit more, 4 figure

Phase transition at 350 K in the Ti3_3C2_2Tx_x MXene: possible sliding (moir\'e) ferroelectricity

A phase transition is found in Ti$_3$C$_2$T$_x$ MXene at 350 K, by measuring the complex Young's modulus of self-standing thick films. A step-like softening and increase of the mechanical losses is found below 350 K, indicative of a phase transition, where the square of the order parameter is coupled to strain. It is argued that it should be a ferroelectric transition, most likely of the sliding (moir\'e) type, due to charge transfer between facing flakes sliding with respect to each other. If the transition will be confirmed to be ferroelectric, Ti$_3$C$_2$T$_x$ will be added to the class of metallic ferroelectrics and open new perspectives of applications, in addition to the numerous already studied

The noise of many needles: Jerky domain wall propagation in PbZrO3 and LaAlO3

Measurements of the sample length of PbZrO3 and LaAlO3 under slowly increasing force (3-30 mN/min) yield a superposition of a continuous decrease interrupted by discontinuous drops. This strain intermittency is induced by the jerky movement of ferroelastic domain walls through avalanches near the depinning threshold. At temperatures close to the domain freezing regime, the distributions of the calculated squared drop velocity maxima N(υm2) follow a power law behaviour with exponents ε=1.6±0.2. This is in good agreement with the energy exponent ε=1.8±0.2 recently found for the movement of a single needle tip in LaAlO3 [R. J. Harrison and E. K. H. Salje, Appl. Phys. Lett. 97, 021907 (2010)]. With increasing temperature, N(υm2) changes from a power law at low temperatures to an exponential law at elevated temperatures, indicating that thermal fluctuations increasingly enable domain wall segments to unpin even when the driving force is smaller than the corresponding barrier

The nonlinear anomalous lattice elasticity associated with the high-pressure phase transition in spodumene: A high precission static compression study

The high-pressure behavior of the lattice elasticity of spodumene, LiAlSi2O6, was studied by static compression in a diamond-anvil cell up to 9.3 GPa. Investigations by means of single-crystal XRD and Raman spectroscopy within the hydrostatic limits of the pressure medium focus on the pressure ranges around similar to 3.2 and similar to 7.7 GPa, which have been reported previously to comprise two independent structural phase transitions. While our measurements confirm the well-established first-order C2/c-P2(1)/c transformation at 3.19 GPa (with 1.2% volume discontinuity and a hysteresis between 0.02 and 0.06 GPa), both unit-cell dimensions and the spectral changes observed in high-pressure Raman spectra give no evidence for structural changes related to a second phase transition. Monoclinic lattice parameters and unit-cell volumes at in total 59 different pressure points have been used to re-calculate the lattice-related properties of spontaneous strain, volume strain, and the bulk moduli as a function of pressure across the transition. A modified Landau free energy expansion in terms of a one component order parameter has been developed and tested against these experimentally determined data. The Landau solution provides a much better reproduction of the observed anomalies than any equation-of-state fit to data sets truncated below and above P (tr), thus giving Landau parameters of K (0) = 138.3(2) GPa, K' = 7.46(5), lambda (V) = 33.6(2) GPa, a = 0.486(3), b = -29.4(6) GPa and c = 551(11) GPa

Statistical Similarity between the Compression of a Porous Material and Earthquakes

It has long been stated that there are profound analogies between fracture experiments and earthquakes; however, few works attempt a complete characterization of the parallels between these so separate phenomena. We study the acoustic emission events produced during the compression of Vycor (SiO2). The Gutenberg-Richter law, the modified Omori's law, and the law of aftershock productivity hold for a minimum of 5 decades, are independent of the compression rate, and keep stationary for all the duration of the experiments. The waiting-time distribution fulfills a unified scaling law with a power-law exponent close to 2.45 for long times, which is explained in terms of the temporal variations of the activity rate

Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti40Zr10Cu36Pd14 bulk metallic glass

This paper envisions Ti40Zr10Cu36Pd14 bulk metallic glass as an oral implant material and evaluates its antibacterial performance in the inhabitation of oral biofilm formation in comparison with the gold standard Ti-6Al-4V implant material. Metallic glasses are superior in terms of biocorrosion and have a reduced stress shielding effect compared with their crystalline counterparts. Dynamic mechanical and thermal expansion analyses on Ti40Zr10Cu36Pd14 show that these materials can be thermomechanically shaped into implants. Static water contact angle measurement on samples' surface shows an increased surface wettability on the Ti-6Al-4V surface after 48 h incubation in the water while the contact angle remains constant for Ti40Zr10Cu36Pd14 . Further, high-resolution transmission and scanning transmission electron microscopy analysis have revealed that Ti40Zr10Cu36Pd14 interior is fully amorphous, while a 15 nm surface oxide is formed on its surface and assigned as copper oxide. Unlike titanium oxide formed on Ti-6Al-4V, copper oxide is hydrophobic, and its formation reduces surface wettability. Further surface analysis by X-ray photoelectron spectroscopy confirmed the presence of copper oxide on the surface. Metallic glasses cytocompatibility was first demonstrated towards human gingival fibroblasts, and then the antibacterial properties were verified towards the oral pathogen Aggregatibacter actinomycetemcomitans responsible for oral biofilm formation. After 24 h of direct infection, metallic glasses reported a >70% reduction of bacteria viability and the number of viable colonies was reduced by similar to 8 times, as shown by the colony-forming unit count. Field emission scanning electron microscopy and fluorescent images confirmed the lower surface colonization of metallic glasses in comparison with controls. Finally, oral biofilm obtained from healthy volunteers was cultivated onto specimens' surface, and proteomics was applied to study the surface property impact on species composition within the oral plaque

Statistical similarity between the compression of a porous material and earthquakes

It has been long stated that there are profound analogies between fracture experiments and earthquakes; however, few works attempt a complete characterization of the parallelisms between these so separate phenomena. We study the Acoustic Emission events produced during the compression of Vycor (SiO&sub&2&/sub&). The Gutenberg-Richter law, the modified Omori's law, and the law of aftershock productivity hold for a minimum of 5 decades, are independent of the compression rate, and keep stationary for all the duration of the experiments. The waiting-time distribution fulfills a unified scaling law with a power-law exponent close to 2.45 for long times, which is explained in terms of the temporal variations of the activity rate

Acoustic attenuation due to transformation twins in CaCl2: Analogue behaviour for stishovite

CaCl2 undergoes a tetragonal (P42/mnm) to orthorhombic (Pnnm) transition as a function of temperature which is essentially the same as occurs in stishovite at high pressures. It can therefore be used as a convenient analogue material for experimental studies. In order to investigate variations in elastic properties associated with the transition and possible anelastic loss behaviour related to the mobility of ferroelastic twin walls in the orthorhombic phase, the transition in polycrystalline CaCl2 has been examined using resonant ultrasound spectroscopy (RUS) at high frequencies (0.1–1.5 MHz) in the temperature interval 7–626 K, and dynamic mechanical analysis (DMA) at low frequencies (0.1–50 Hz) in the temperature interval 378–771 K. RUS data show steep softening of the shear modulus as the transition temperature is approached from above and substantial acoustic dissipation in the stability field of the orthorhombic structure. DMA data show softening of the storage modulus, which continues through to a minimum ∼20 K below the transition point and is followed by stiffening with further lowering of temperature. There is no obvious acoustic dissipation associated with the transition, as measured by tan δ, however. The elastic softening and stiffening matches the pattern expected for a pseudoproper ferroelastic transition as predicted elsewhere. Acoustic loss behaviour at high frequencies fits with the pattern of behaviour expected for a twin wall loss mechanism but with relaxation times in the vicinity of ∼10−6 s. With such short relaxation times, the shear modulus of CaCl2 at frequencies corresponding to seismic frequencies would include relaxations of the twin walls and is therefore likely to be significantly lower than the intrinsic shear modulus. If these characteristics apply also to twin wall mobility in stishovite, the seismic signature of the orthorhombic phase should be an unusually soft shear modulus but with no increase in attenuation

Dynamic mechanical analysis of supercooled water in nanoporous confinement

Dynamical mechanical analysis $(\text{DMA})(f=0.2\text{--}100\ \text{Hz})$ is used to study the dynamics of confined water in mesoporous Gelsil (2.6 nm and 5 nm pores) and Vycor (10 nm) in the temperature range from $T=80\ \text{K}$ to 300 K. Confining water into nanopores partly suppresses crystallization and allows us to perform measurements of supercooled water below 235 K, i.e., in water's so-called “no man's land”, in parts of the pores. Two distinct relaxation peaks are observed in tan δ around $T_1 \approx 145\ \text{K}\ (P_{1})$ and $T_2 \approx 205\ \text{K}~(P_{2})$ for Gelsil 2.6 nm and Gelsil 5 nm at 0.2 Hz. Both peaks shift to higher T with increasing pore size d and change with f in a systematic way, typical of an Arrhenius behaviour of the corresponding relaxation times. For P1 we obtain an average activation energy of $E_{\text{a}} = 0.47\ \text{eV}$ , in good agreement with literature values, suggesting that P1 corresponds to the glass transition of supercooled water. The observation of a pronounced softening of the Young's modulus around 165 K (for Gelsil 2.6 nm at 0.2 Hz) supports the conjecture of a glass-to-liquid transition in the vicinity of P1. In addition we find a clear-cut (1/d)-dependence of the calculated glass transition temperatures which extrapolates to $T_\text{g}(1/d=0)=136\ \text{K}$ , in agreement with the traditional value of water