Beliefs About the Health Effects of Smoking Among Adults in the United States

The majority of U.S. adults believe that smoking is a cause of lung cancer, but research suggests that the percentage of adults who believe smoking causes other types of cancers and chronic disease is lower. This study examines the correlates of beliefs about several established health effects of smoking in a nationally representative sample of U.S. adults. Data for this study come from Wave 4 of the Population Assessment of Tobacco and Health Study conducted from December 2016 to January 2018. Participants responded to questions assessing their beliefs about the health effects of smoking. Logistic regression models were used to examine the relationship between beliefs about the health effects of smoking and sociodemographic characteristics (smoker status, age, sex, education, race/ethnicity), exposure to antitobacco campaigns, smokers’ health, and nicotine dependence. The percentage of U.S. adults who endorsed a health effect can be caused from smoking ranged from 56.4% for blindness to 97.4% for lung disease. Respondents who were older, less educated, current or former smokers, and had less exposure to antitobacco campaigns were generally less likely (p <.05) to endorse that an established health effect was caused by smoking. Smokers with lower nicotine dependence and worse health were generally more likely (p <.05) to endorse that an established health effect was caused by smoking. In summary, knowledge about the health effects of smoking varies across health conditions. Public health would benefit from campaigns targeting segments of the population with less knowledge about the health effects of smoking

Sociodemographic Disparities in Tobacco Retailer Density in the United States, 2000-2017

Introduction: Studies find differences in tobacco retailer density according to neighborhood sociodemographic characteristics, raising issues of social justice, but not all research is consistent. Aims and Methods: This study examined associations between tobacco retailer density and neighborhood sociodemographic characteristics in the United States at four timepoints (2000, 2007, 2012, and 2017) and investigated if associations remained stable over time. Data on tobacco retailers came from the National Establishment Time-Series Database. Adjusted log-linear models examined the relationship between retailer density and census tract sociodemographic characteristics (% non-Hispanic Black [Black], % Hispanic, % vacant housing units, median household income), controlling for percentage of youth, urbanicity, and US region. To examine whether the relationship between density and sociodemographic characteristics changed over time, additional models were estimated with interaction terms between each sociodemographic characteristic and year. Results: Tobacco retailer density ranged from 1.22 to 1.44 retailers/1000 persons from 2000 to 2017. There were significant, positive relationships between tobacco retailer density and the percentage of Black (standardized exp(b) = 1.05 [95% CI: 1.04% to 1.07%]) and Hispanic (standardized exp(b) = 1.06 [95% CI: 1.05% to 1.08%]) residents and the percentage of vacant housing units (standardized exp(b) =1.08 [95% CI: 1.07% to 1.10%]) in a census tract. Retailer density was negatively associated with income (standardized exp(b) = 0.84 [95% CI: 0.82% to 0.86%]). From 2000 to 2017, the relationship between retailer density and income and vacant housing units became weaker. Conclusions: Despite the weakening of some associations, there are sociodemographic disparities in tobacco retailer density from 2000 to 2017, which research has shown may contribute to inequities in smoking. Implications: This study examines associations between tobacco retailer density and neighborhood sociodemographic characteristics in the United States at four timepoints from 2000 to 2017. Although some associations weakened, there are sociodemographic disparities in tobacco retailer density over the study period. Research suggests that sociodemographic disparities in retailer density may contribute to inequities in smoking. Findings from this study may help identify which communities should be prioritized for policy intervention and regulation

A cross-institutional analysis of the effects of broadening trainee professional development on research productivity

PhD-trained scientists are essential contributors to the workforce in diverse employment sectors that include academia, industry, government, and nonprofit organizations. Hence, best practices for training the future biomedical workforce are of national concern. Complementing coursework and laboratory research training, many institutions now offer professional training that enables career exploration and develops a broad set of skills critical to various career paths. The National Institutes of Health (NIH) funded academic institutions to design innovative programming to enable this professional development through a mechanism known as Broadening Experiences in Scientific Training (BEST). Programming at the NIH BEST awardee institutions included career panels, skill-building workshops, job search workshops, site visits, and internships. Because doctoral training is lengthy and requires focused attention on dissertation research, an initial concern was that students participating in additional complementary training activities might exhibit an increased time to degree or diminished research productivity. Metrics were analyzed from 10 NIH BEST awardee institutions to address this concern, using time to degree and publication records as measures of efficiency and productivity. Comparing doctoral students who participated to those who did not, results revealed that across these diverse academic institutions, there were no differences in time to degree or manuscript output. Our findings support the policy that doctoral students should participate in career and professional development opportunities that are intended to prepare them for a variety of diverse and important careers in the workforce

On the mechanisms governing gas penetration into a tokamak plasma during a massive gas injection

A new 1D radial fluid code, IMAGINE, is used to simulate the penetration of gas into a tokamak plasma during a massive gas injection (MGI). The main result is that the gas is in general strongly braked as it reaches the plasma, due to mechanisms related to charge exchange and (to a smaller extent) recombination. As a result, only a fraction of the gas penetrates into the plasma. Also, a shock wave is created in the gas which propagates away from the plasma, braking and compressing the incoming gas. Simulation results are quantitatively consistent, at least in terms of orders of magnitude, with experimental data for a D 2 MGI into a JET Ohmic plasma. Simulations of MGI into the background plasma surrounding a runaway electron beam show that if the background electron density is too high, the gas may not penetrate, suggesting a possible explanation for the recent results of Reux et al in JET (2015 Nucl. Fusion 55 093013)

Impact of nitrogen seeding on confinement and power load control of a high-triangularity JET ELMy H-mode plasma with a metal wall

This paper reports the impact on confinement and power load of the high-shape 2.5MA ELMy H-mode scenario at JET of a change from an all carbon plasma facing components to an all metal wall. In preparation to this change, systematic studies of power load reduction and impact on confinement as a result of fuelling in combination with nitrogen seeding were carried out in JET-C and are compared to their counterpart in JET with a metallic wall. An unexpected and significant change is reported on the decrease of the pedestal confinement but is partially recovered with the injection of nitrogen.Comment: 30 pages, 16 figure

Non-resonant magnetic braking on JET and TEXTOR

The non-resonant magnetic braking effect induced by a non-axisymmetric magnetic perturbation is investigated on JET and TEXTOR. The collisionality dependence of the torque induced by the n = 1, where n is the toroidal mode number, magnetic perturbation generated by the error field correction coils on JET is observed. The observed torque is located mainly in the plasma core (normalized radius

Effect of PFC Recycling Conditions on JET Pedestal Density

There is experimental evidence that the pedestal dynamics in type-I ELMy H-mode discharges is significantly affected by a change in the recycling conditions at the tungsten plasma-facing components (W-PFCs) after an ELM event. The integrated code JINTRAC has been employed to assess the impact of recycling conditions during type-I ELMs in JET ITER-like wall H-mode discharges. By employing a heuristic approach, a model to mimic the physical processes leading to formation and release (i.e. outgassing) of finite near-surface fuel reservoirs in W-PFCs has been implemented into the EDGE2D-EIRENE plasma-wall interaction code being part of JINTRAC. As main result it is shown, that a delay in the density pedestal build-up after an ELM event can be provoked by reduced recycling induced by depleted W-PFC particle near-surface reservoirs. However the pedestal temperature evolution is barely affected by the change in recycling parameters suggesting that the presented model is incomplete

Overview of JET results

Since the last IAEA conference, the scientific programme of JET has focused on the qualification of the integrated operating scenarios for ITER and on physics issues essential for the consolidation of design choices and the efficient exploitation of ITER. Particular attention has been given to the characterization of the edge plasma, pedestal energy and edge localized modes (ELMs), and their impact on plasma facing components (PFCs). Various ELM mitigation techniques have been assessed for all ITER operating scenarios using active methods such as resonant magnetic field perturbation, rapid variation of the radial field and pellet pacing. In particular, the amplitude and frequency of type I ELMs have been actively controlled over a wide parameter range (q95 = 3-4.8, βN ≥ 3.0) by adjusting the amplitude of the n = 1 external perturbation field induced by error field correction coils. The study of disruption induced heat loads on PFCs has taken advantage of a new wide-angle viewing infrared system and a fast bolometer to provide a detailed account of time, localization and form of the energy deposition. Specific ITER-relevant studies have used the unique JET capability of varying the toroidal field (TF) ripple from its normal low value δBT = 0.08% up to δBT = 1% to study the effect of TF ripple on high confinement-mode plasmas. The results suggest that δBT < 0.5% is required on ITER to maintain adequate confinement to allow QDT = 10 at full field. Physics issues of direct relevance to ITER include heat and toroidal momentum transport, with experiments using power modulation to decouple power input and torque to achieve first experimental evidence of inward momentum pinch in JET and determine the threshold for ion temperature gradient driven modes. Within the longer term JET programme in support of ITER, activities aiming at the modification of the JET first wall and divertor and the upgrade of the neutral beam and plasma control systems are being conducted. The procurement of all components will be completed by 2009 with the shutdown for the installation of the beryllium wall and tungsten divertor extending from summer 2009 to summer 2010