616 research outputs found

    AMBER and CRIRES observations of the binary sgB[e] star HD 327083: evidence of a gaseous disc traced by CO bandhead emission

    Full text link
    HD 327083 is a sgB[e] star that forms a binary system with an orbital semi-major axis of ~1.7 AU. Our previous observations using the VLTI and AMBER in the medium resolution K-band mode spatially resolved the environment of HD 327083. The continuum visibilities obtained indicate the presence of a circumbinary disc. CO bandhead emission was also observed. However, due to the limited spectral resolution of the previous observations, the kinematic structure of the emitting material was not constrained. In this paper, we address this and probe the source of the CO emission with high spectral resolution and spatial precision. We have observed HD 327083 with high spectral resolution (25 & 6 km/s) using AMBER and CRIRES. The observations are compared to kinematical models to constrain the source of the emission. It is shown that the CO bandhead emission can be reproduced using a model of a Keplerian disc with an inclination and size consistent with our previous VLTI observations. The model is compared to AMBER differential phase measurements, which have a precision as high as 30-micro-arcseconds. A differential phase signal corresponding to 0.15 milli-arcseconds (~5 sigma) is seen over the bandhead emission, which is in excellent agreement with the model that fits the CRIRES observations. In comparison, a model of an equatorial outflow, as envisaged in the standard sgB[e] scenario, does not reproduce the observations well. The excellent agreement between the disc model and observations in the spatial and spectral domains is compelling evidence that the CO bandhead emission of HD 327083 originates in a circumbinary Keplerian disc. In contrast, the model of an equatorial outflow cannot reproduce the observations well. This suggests that the standard sgB[e] scenario is not applicable to HD 327083, which supports the hypothesis that the B[e] behaviour of HD 327083 is due to binarity (ABRIDGED).Comment: Accepted for publication in A&

    Probing discs around massive young stellar objects with CO first overtone emission

    Full text link
    We present high resolution (R~50,000) spectroastrometry over the CO 1st overtone bandhead of a sample of seven intermediate/massive young stellar objects. These are primarily drawn from the red MSX source (RMS) survey, a systematic search for young massive stars which has returned a large, well selected sample of such objects. The mean luminosity of the sample is approximately 5 times 10^4 L_\odot, indicating the objects typically have a mass of ~15 solar masses. We fit the observed bandhead profiles with a model of a circumstellar disc, and find good agreement between the models and observations for all but one object. We compare the high angular precision (0.2-0.8 mas) spectroastrometric data to the spatial distribution of the emitting material in the best-fitting models. No spatial signatures of discs are detected, which is entirely consistent with the properties of the best-fitting models. Therefore, the observations suggest that the CO bandhead emission of massive young stellar objects originates in small-scale disks, in agreement with previous work. This provides further evidence that massive stars form via disc accretion, as suggested by recent simulations.Comment: Accepted for publication in MNRA

    VLTI/AMBER observations of the binary B[e] supergiant HD 327083

    Full text link
    HD 327083 is a luminous B type star which exhibits emission lines and an infrared excess and is therefore classified as a supergiant B[e] star. In addition, the star is the primary of a close binary system. It is not clear whether the B[e] behaviour of HD 327083 is related to its binarity or its evolutionary state. Here we address this issue by studying its circumstellar environment with high spatial resolution. To this end, we have observed HD 327083 with the VLTI and AMBER in the medium resolution K-band setting. 13CO bandhead emission is detected, confirming HD 327083 is a post-main sequence object. The observations spatially resolve the source of the NIR continuum and the Br-gamma and CO line emission. In addition, differential phase measurements allow us to probe the origin of the observed Br-gamma emission with sub-mas precision. Using geometrical models, we find that the visibilities and closure phases suggest that the close binary system is surrounded by a circum-binary disk. We also find that in the case of the binary HD 327083, the relative sizes of the continuum and Br-gamma emitting regions are different to those of a single supergiant B[e] star where the standard dual outflow scenario is thought to apply. These findings are consistent with the hypothesis that the mass loss of HD 327083 is related to its binary nature.Comment: Accepted in A&

    THE RECOVERY OF FISSION PRODUCT RARE EARTH SULFATES FROM PUREX 1WW

    Get PDF
    Cerium- and 144 promethium-147, accompanied by rare earths resulting from fission or decay can be removed from Purex 1WW in>90% yield as an insoluble, crystalline sodium-rare earth double sulfate. Precipitation is initiated by a one-to-three hour equilibration at 90 deg C and centrifugation at 90 deg C to take advantage of the lower solubility of the double sulfate salt at a higher temperature. The sulfate concentration should be one molar and the solution pH at the time of precipitation should be 0.5 to 1.5. The addition of tartrate ion to complex the iron allows the use of a higher pH and sulfate concentration, gives a more complete separation from iron, and a quantitative recovery of the rare earths. The double sulfate precipitate can be dissolved in dilute nitric acid or converted to the carbonate and then dissolved to yield a solution for further processing. The double sulfate precipitation of the rare earths, with tartrate added, gives a good separation from impurities. One-cycle decontamination factors of 150 for Zr-Nb and 1100 for Ru-Rh have been achieved in laboratory tests. Tests in the Purex head-end equipment with up to twomegacurie batches of cerium have corroborated the laboratory results. Decontamination factors of 70 for iron, 10 for zirconium, 20 for niobium and 25 for ruthenium have been obtained. It was found wise to limit the batch size because decay heat leads to partial calcination in the centrifuge and to difficulty in redissolution. (auth

    Tracers of Discs and Winds around Intermediate and High Mass Young Stellar Objects

    Get PDF
    We present a study of the kinematical properties of a small sample of nearby near-infrared bright massive and intermediate mass young stellar objects using emission lines sensitive to discs and winds. We show for the first time that the broad (500\sim500kms1^{-1}) symmetric line wings on the HI Brackett series lines are due to Stark broadening or electron scattering, rather than pure Doppler broadening due to high speed motion. The results are consistent with the presence of a very dense circumstellar environment. In addition, many of these lines show evidence for weak line self-absorption, suggestive of a wind or disc-wind origin for that part of the absorbing material. The weakness of the self-absorption suggests a large opening angle for such an outflow. We also study the fluorescent 1.688μ\mum FeII line, which is sensitive to dense material. We fitted a Keplerian disc model to this line, and find reasonable fits in all bar one case, in agreement with previous finding for classical Be stars that fluorescent iron transitions are reasonable disc tracers. Overall the picture is one in which these stars still have accretion discs, with a very dense inner circumstellar environment which may be tracing either the inner regions of a disc, or of a stellar wind, and in which ionised outflow is also present. The similarity with lower mass stars is striking, suggesting that at least in this mass range they form in a similar fashion.Comment: 20 pages, 7 figures, accepted for publication in MNRA

    Development and testing of the Active Temperature, Ozone and Moisture Microwave Spectrometer (ATOMMS) cm and mm wavelength occultation instrument

    Get PDF
    We present initial results from testing a new remote sensing system called the Active Temperature, Ozone and Moisture Microwave Spectrometer (ATOMMS). ATOMMS is designed as a satellite-to-satellite occultation system for monitoring climate. We are developing the prototype instrument for an aircraft to aircraft occultation demonstration. Here we focus on field testing of the ATOMMS instrument, in particular the remote sensing of water by measuring the attenuation caused by the 22 GHz and 183 GHz water absorption lines. Our measurements of the 183 GHz line spectrum along an 820 m path revealed that the AM 6.2 spectroscopic model provdes a much better match to the observed spectrum than the MPM93 model. These comparisons also indicate that errors in the ATOMMS amplitude measurements are about 0.3%. Pressure sensitivity bodes well for ATOMMS as a climate instrument. Comparisons with a hygrometer revealed consistency at the 0.05 mb level, which is about 1% of the absolute humidity. Initial measurements of absorption by the 22 GHz line made along a 5.4 km path between two mountaintops captured a large increase in water vapor similar to that measured by several nearby hygrometers. A storm passage between the two instruments yielded our first measurements of extinction by rain and cloud droplets. Comparisons of ATOMMS 1.5 mm opacity measurements with measured visible opacity and backscatter from a weather radar revealed features simultaneously evident in all three datasets confirming the ATOMMS measurements. The combined ATOMMS, radar and visible information revealed the evolution of rain and cloud amounts along the signal path during the passage of the storm. The derived average cloud water content reached typical continental cloud amounts. These results demonstrated a significant portion of the information content of ATOMMS and its ability to penetrate through clouds and rain which is critical to its all-weather, climate monitoring capability

    Probing the properties of Be star discs with spectroastrometry and NLTE radiative transfer modelling: beta CMi

    Full text link
    While the presence of discs around classical Be stars is well established, their origin is still uncertain. To understand what processes result in the creation of these discs and how angular momentum is transported within them, their physical properties must be constrained. This requires comparing high spatial and spectral resolution data with detailed radiative transfer modelling. We present a high spectral resolution, R~80,000, sub milli-arcsecond precision, spectroastrometric study of the circumstellar disc around the Be star beta CMi. The data are confronted with three-dimensional, NLTE radiative transfer calculations to directly constrain the properties of the disc. Furthermore, we compare the data to disc models featuring two velocity laws; Keperian, the prediction of the viscous disc model, and angular momentum conserving rotation. It is shown that the observations of beta CMi can only be reproduced using Keplerian rotation. The agreement between the model and the observed SED, polarisation and spectroastrometric signature of beta CMi confirms that the discs around Be stars are well modelled as viscous decretion discs.Comment: Accepted for publication in MNRA

    Probing the envelopes of massive young stellar objects with diffraction limited mid-infrared imaging

    Full text link
    Massive stars form whilst they are still embedded in dense envelopes. As a result, the roles of rotation, mass loss and accretion in massive star formation are not well understood. This study evaluates the source of the Q-band, lambda=19.5 microns, emission of massive young stellar objects (MYSOs). This allows us to determine the relative importance of rotation and outflow activity in shaping the circumstellar environments of MYSOs on 1000 AU scales. We obtained diffraction limited mid-infrared images of a sample of 20 MYSOs using the VLT/VISIR and Subaru/COMICS instruments. For these 8 m class telescopes and the sample selected, the diffraction limit, ~0.6", corresponds to approximately 1000 AU. We compare the images and the spectral energy distributions (SEDs) observed to a 2D, axis-symmetric dust radiative transfer model that reproduces VLTI/MIDI observations of the MYSO W33A. We vary the inclination, mass infall rate, and outflow opening angle to simultaneously recreate the behaviour of the sample of MYSOs in the spatial and spectral domains. The mid-IR emission of 70 percent of the MYSOs is spatially resolved. In the majority of cases, the spatial extent of their emission and their SEDs can be reproduced by the W33A model featuring an in-falling, rotating dusty envelope with outflow cavities. There is independent evidence that most of the sources which are not fit by the model are associated with ultracompact HII regions and are thus more evolved. We find that, in general, the diverse 20 micron morphology of MYSOs can be attributed to warm dust in the walls of outflow cavities seen at different inclinations. This implies that the warm dust in the outflow cavity walls dominates the Q-band emission of MYSOs. In turn, this emphasises that outflows are an ubiquitous feature of massive star formation.Comment: Accepted for publication in A&A. The images in this version have been compressed. A high resolution version is available on reques

    CO bandhead emission of massive young stellar objects: determining disc properties

    Get PDF
    Massive stars play an important role in many areas of astrophysics, but numerous details regarding their formation remain unclear. In this paper we present and analyse high-resolution (R~30 000) near-infrared 2.3 μm spectra of 20 massive young stellar objects (MYSOs) from the Red MSX Source (RMS) data base, in the largest such study of CO first overtone bandhead emission to date. We fit the emission under the assumption it originates from a circumstellar disc in Keplerian rotation. We explore three approaches to modelling the physical conditions within the disc-a disc heated mainly via irradiation from the central star, a disc heated mainly via viscosity, and a disc in which the temperature and density are described analytically. We find that the models described by heating mechanisms are inappropriate because they do not provide good fits to the CO emission spectra. We therefore restrict our analysis to the analytic model, and obtain good fits to all objects that possess sufficiently strong CO emission, suggesting circumstellar discs are the source of this emission. On average, the temperature and density structure of the discs correspond to geometrically thin discs, spread across a wide range of inclinations. Essentially all the discs are located within the dust sublimation radius, providing strong evidence that the CO emission originates close to the central protostar, on astronomical unit scales. In addition, we show that the objects in our sample appear no different to the general population of MYSOs in the RMS data base, based on their near- and mid-infrared colours. The combination of observations of a large sample of MYSOs with CO bandhead emission and our detailed modelling provide compelling evidence of the presence of small-scale gaseous discs around such objects, supporting the scenario in which massive stars form via disc accretion. © 2013 The Authors. Published by Oxford University Press on behalf of the Royal Astronomical Society
    corecore