438 research outputs found
Powder removal from Ti-6Al-4V cellular structures fabricated via electron beam melting
Direct metal fabrication systems like electron beam melting (EBM) and direct metal laser sintering (also called selective laser melting) are gaining popularity. One reason is the design and fabrication freedom that these technologies offer over traditional processes. One specific feature that is of interest is mesh or lattice structures that can be produced using these powder-bed systems. One issue with the EBM process is that the powder trapped within the structure during the fabrication process is sintered and can be hard to remove as the mesh density increases. This is usually not an issue for the laser-based systems since most of them work at a low temperature and the sintering of the powder is less of an issue. Within the scope of this project, a chemical etching process was evaluated for sintered powder removal using three different cellular structures with varying mesh densities. All meshes were fabricated via EBM using Ti6Al4V Footnote Information powder. The results are promising, but the larger the structures, the more difficult it is to completely remove the sintered powder without affecting the integrity of the mesh structure
Use of three-terminal impedance spectroscopy to characterize sodium-ion batteries at various stages of cycle life
The use of 3-terminal measurements to separate different impedance components of a prototype sodium-ion battery is outlined. By addition of a sodium metal reference electrode, the two electrode-electrolyte interfaces can be measured separately and changes monitored at various stages of battery cycle life. The impedance of a freshly-constructed cell is dominated by the blocking capacitance of the anode-electrolyte interface and the charge-transfer resistance at the cathode-electrolyte interface. The variation of these components during charge and discharge cycling provide a method to monitor evolution of cell performance
Sugawara-type constraints in hyperbolic coset models
In the conjectured correspondence between supergravity and geodesic models on
infinite-dimensional hyperbolic coset spaces, and E10/K(E10) in particular, the
constraints play a central role. We present a Sugawara-type construction in
terms of the E10 Noether charges that extends these constraints infinitely into
the hyperbolic algebra, in contrast to the truncated expressions obtained in
arXiv:0709.2691 that involved only finitely many generators. Our extended
constraints are associated to an infinite set of roots which are all imaginary,
and in fact fill the closed past light-cone of the Lorentzian root lattice. The
construction makes crucial use of the E10 Weyl group and of the fact that the
E10 model contains both D=11 supergravity and D=10 IIB supergravity. Our
extended constraints appear to unite in a remarkable manner the different
canonical constraints of these two theories. This construction may also shed
new light on the issue of `open constraint algebras' in traditional canonical
approaches to gravity.Comment: 49 page
Defect chemistry and electrical properties of BiFeO3
BiFeO3 attracts considerable attention for its rich functional properties, including room temperature coexistence of magnetic order and ferroelectricity and more recently, the discovery of conduction pathways along ferroelectric domain walls. Here, insights into the defect chemistry and electrical properties of BiFeO3 are obtained by in situ measurements of electrical conductivity, σ, and Seebeck coefficient, α, of undoped, cation-stoichiometric BiFeO3 and acceptor-doped Bi1−xCaxFeO3−δ ceramics as a function of temperature and oxygen partial pressure pO2. Bi1−xCaxFeO3−δ exhibits p-type conduction; the dependencies of σ and α on pO2 show that Ca dopants are compensated mainly by oxygen vacancies. By contrast, undoped BiFeO3 shows a simultaneous increase of σ and α with increasing pO2, indicating intrinsic behavior with electrons and holes as the main defect species in almost equal concentrations. The pO2-dependency of σ and α cannot be described by a single point defect model but instead, is quantitatively described by a combination of intrinsic and acceptor-doped characteristics attributable to parallel conduction pathways through undoped grains and defect-containing domain walls; both contribute to the total charge transport in BiFeO3. Based on this model, we discuss the charge transport mechanism and carrier mobilities of BiFeO3 and show that several previous experimental findings can readily be explained within the proposed model
Telephus on Paros: genealogy and myth in the 'new Archilochus' poem (P. Oxy. 4708)
The discovery of the new ‘Telephus Elegy’ in 2005 has transformed our knowledge of Archilochus by providing the first surviving example of his use of myth. Yet scholars have found the choice and handling of the Telephus myth surprising. This article will explore the significance that Telephus had for a Parian and/or Thasian audience, and will use this to investigate the political and rhetorical impact of his presentation in the poem. It argues that Archilochus emphasises the aspects of Telephus’ story that connect him most closely with local myth, and that he does so to enhance the poem’s central message: criticism and implicit mockery of the mythological battle, and by implication, of contemporary Parian military strategy
Pion-photon and photon-pion transition form factors in light-cone formalism
We derive the minimal Fock-state expansions of the pion and the photon wave
functions in light-cone formalism, then we calculate the pion-photon and the
photon-pion transition form factors of and
processes by employing these
quark-antiquark wave functions of the pion and the photon. We find that our
calculation for the transition form factor
agrees with the experimental data at low and moderately high energy scale.
Moreover, the physical differences and inherent connections between the
transition form factors of and have been illustrated, which indicate that these
two physical processes are intrinsically related. In addition, we also discuss
the form factor and the decay width at .Comment: 20 pages, 2 figure
Strings on conifolds from strong coupling dynamics, part I
A method to solve various aspects of the strong coupling expansion of the
superconformal field theory duals of AdS_5 x X geometries from first principles
is proposed. The main idea is that at strong coupling the configurations that
dominate the low energy dynamics of the field theory compactified on a three
sphere are given by certain non-trivial semi-classical configurations in the
moduli space of vacua.
We show that this approach is self-consistent and permits one to express most
of the dynamics in terms of an effective N=4 SYM dynamics. This has the
advantage that some degrees of freedom that move the configurations away from
moduli space can be treated perturbatively, unifying the essential low energy
dynamics of all of these theories. We show that with this formalism one can
compute the energies of strings in the BMN limit in the Klebanov-Witten theory
from field theory considerations, matching the functional form of results found
using AdS geometry. This paper also presents various other technical results
for the semiclassical treatment of superconformal field theories.Comment: 52 pages, JHEP3 styl
Heavy quarkonium 2S states in light-front quark model
We study the charmonium 2S states and , and the bottomonium
2S states and , using the light-front quark model and the
2S state wave function of harmonic oscillator as the approximation of the 2S
quarkonium wave function. The decay constants, transition form factors and
masses of these mesons are calculated and compared with experimental data.
Predictions of quantities such as Br are made. The
2S wave function may help us learn more about the structure of these heavy
quarkonia.Comment: 5 latex pages, final version for journal publicatio
SARS-CoV-2 mRNA vaccine design enabled by prototype pathogen preparedness
A vaccine for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is needed to control the coronavirus disease 2019 (COVID-19) global pandemic. Structural studies have led to the development of mutations that stabilize Betacoronavirus spike proteins in the prefusion state, improving their expression and increasing immunogenicity1. This principle has been applied to design mRNA-1273, an mRNA vaccine that encodes a SARS-CoV-2 spike protein that is stabilized in the prefusion conformation. Here we show that mRNA-1273 induces potent neutralizing antibody responses to both wild-type (D614) and D614G mutant2 SARS-CoV-2 as well as CD8+ T cell responses, and protects against SARS-CoV-2 infection in the lungs and noses of mice without evidence of immunopathology. mRNA-1273 is currently in a phase III trial to evaluate its efficacy
- …