Моделирование процесса перемешивания струйным методом жидких радиоактивных отходов в прямоугольных емкостях

Рассмотрен процесс перемешивания жидких радиоактивных отходов в прямоугольных емкостях при вертикальном расположении сопел. На основе теории подобия проведено моделирование процесса. Определены конструктивные характеристики перемешивающих устройств; скоростные характеристики раствора при истечении из перемешивающих устройств; условия взвешивания частиц в слабосолевых растворах с целью определения времени перемешивания струйным методом

Real‐Time SWMF at CCMC: Assessing the Dst Output From Continuous Operational Simulations

The ground‐based magnetometer index of Dst is a commonly used measure of near‐Earth current systems, in particular the storm time inner magnetospheric current systems. The ability of a large‐scale, physics‐based model to reproduce, or even predict, this index is therefore a tangible measure of the overall validity of the code for space weather research and space weather operational usage. Experimental real‐time simulations of the Space Weather Modeling Framework (SWMF) are conducted at the Community Coordinated Modeling Center (CCMC). Presently, two configurations of the SWMF are running in real time at CCMC, both focusing on the geospace modules, using the Block Adaptive Tree Solar wind‐type Roe Upwind Solver magnetohydrodynamic model, the Ridley Ionosphere Model, and with and without the Rice Convection Model. While both have been running for several years, nearly continuous results are available since April 2015. A 27‐month interval through July 2017 is used for a quantitative assessment of Dst from the model output compared against the Kyoto real‐time Dst. Quantitative measures are presented to assess the goodness of fit including contingency tables and a receiver operating characteristic curve. It is shown that the SWMF run with the inner magnetosphere model is much better at reproducing storm time values, with a correlation coefficient of 0.69, a prediction efficiency of 0.41, and Heidke skill score of 0.57 (for a −50‐nT threshold). A comparison of real‐time runs with and without the inner magnetospheric drift physics model reveals that nearly all of the storm time Dst signature is from current systems related to kinetic processes on closed magnetic field lines.Plain Language SummaryAs society becomes more dependent on technologies susceptible to adverse space weather, it is becoming increasingly critical to have numerical models capable of running in real time to nowcast/forecast the conditions in the near‐Earth space environment. One such model is available at the Community Coordinated Modeling Center and has been running for several years, allowing for an assessment of the quality of the result. Comparisons are made against globally compiled index of near‐Earth space storm activity, including numerous statistical quantities and tests. The skill of the model is remarkable, especially when a few hours after each of the cold restarts of the model are removed from the comparison. It is also shown that a global model alone is not that good at reproducing this storm index; a regional model for the inner part of geospace is necessary for good data‐model agreement.Key PointsThe SWMF model has been running in experimental real‐time mode at CCMC for several years, and all saved output is availableThe comparison against real‐time Dst is quite good, especially when a few hours after cold restarts are removed from the comparisonIt is necessary to include an inner magnetospheric drift physics model to reproduce Dst; a real‐time run without one does much worsePeer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/146631/1/swe20766.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/146631/2/swe20766_am.pd

Comparison of predictive estimates of high‐latitude electrodynamics with observations of global‐scale Birkeland currents

Two of the geomagnetic storms for the Space Weather Prediction Center Geospace Environment Modeling challenge occurred after data were first acquired by the Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE). We compare Birkeland currents from AMPERE with predictions from four models for the 4–5 April 2010 and 5–6 August 2011 storms. The four models are the Weimer (2005b) field‐aligned current statistical model, the Lyon‐Fedder‐Mobarry magnetohydrodynamic (MHD) simulation, the Open Global Geospace Circulation Model MHD simulation, and the Space Weather Modeling Framework MHD simulation. The MHD simulations were run as described in Pulkkinen et al. (2013) and the results obtained from the Community Coordinated Modeling Center. The total radial Birkeland current, ITotal, and the distribution of radial current density, Jr, for all models are compared with AMPERE results. While the total currents are well correlated, the quantitative agreement varies considerably. The Jr distributions reveal discrepancies between the models and observations related to the latitude distribution, morphologies, and lack of nightside current systems in the models. The results motivate enhancing the simulations first by increasing the simulation resolution and then by examining the relative merits of implementing more sophisticated ionospheric conductance models, including ionospheric outflows or other omitted physical processes. Some aspects of the system, including substorm timing and location, may remain challenging to simulate, implying a continuing need for real‐time specification.Key PointsPresents the first comparison between observed field‐aligned currents and models previously evaluated for space weather operational useThe model and observed integrated currents are well correlated, but the ratio between them ranges from 1/3 to 3The 2‐D current densities are weakly correlated with observations implying significant areas for improvements in the modelsPeer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/136469/1/swe20415_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/136469/2/swe20415.pd

Mechanical design of the optical modules intended for IceCube-Gen2

IceCube-Gen2 is an expansion of the IceCube neutrino observatory at the South Pole that aims to increase the sensitivity to high-energy neutrinos by an order of magnitude. To this end, about 10,000 new optical modules will be installed, instrumenting a fiducial volume of about 8 km3. Two newly developed optical module types increase IceCube’s current sensitivity per module by a factor of three by integrating 16 and 18 newly developed four-inch PMTs in specially designed 12.5-inch diameter pressure vessels. Both designs use conical silicone gel pads to optically couple the PMTs to the pressure vessel to increase photon collection efficiency. The outside portion of gel pads are pre-cast onto each PMT prior to integration, while the interiors are filled and cast after the PMT assemblies are installed in the pressure vessel via a pushing mechanism. This paper presents both the mechanical design, as well as the performance of prototype modules at high pressure (70 MPa) and low temperature (−40∘C), characteristic of the environment inside the South Pole ice

The next generation neutrino telescope: IceCube-Gen2

The IceCube Neutrino Observatory, a cubic-kilometer-scale neutrino detector at the geographic South Pole, has reached a number of milestones in the field of neutrino astrophysics: the discovery of a high-energy astrophysical neutrino flux, the temporal and directional correlation of neutrinos with a flaring blazar, and a steady emission of neutrinos from the direction of an active galaxy of a Seyfert II type and the Milky Way. The next generation neutrino telescope, IceCube-Gen2, currently under development, will consist of three essential components: an array of about 10,000 optical sensors, embedded within approximately 8 cubic kilometers of ice, for detecting neutrinos with energies of TeV and above, with a sensitivity five times greater than that of IceCube; a surface array with scintillation panels and radio antennas targeting air showers; and buried radio antennas distributed over an area of more than 400 square kilometers to significantly enhance the sensitivity of detecting neutrino sources beyond EeV. This contribution describes the design and status of IceCube-Gen2 and discusses the expected sensitivity from the simulations of the optical, surface, and radio components

Sensitivity of IceCube-Gen2 to measure flavor composition of Astrophysical neutrinos

The observation of an astrophysical neutrino flux in IceCube and its detection capability to separate between the different neutrino flavors has led IceCube to constraint the flavor content of this flux. IceCube-Gen2 is the planned extension of the current IceCube detector, which will be about 8 times larger than the current instrumented volume. In this work, we study the sensitivity of IceCube-Gen2 to the astrophysical neutrino flavor composition and investigate its tau neutrino identification capabilities. We apply the IceCube analysis on a simulated IceCube-Gen2 dataset that mimics the High Energy Starting Event (HESE) classification. Reconstructions are performed using sensors that have 3 times higher quantum efficiency and isotropic angular acceptance compared to the current IceCube optical modules. We present the projected sensitivity for 10 years of data on constraining the flavor ratio of the astrophysical neutrino flux at Earth by IceCube-Gen2

Estimating the coincidence rate between the optical and radio array of IceCube-Gen2

The IceCube-Gen2 Neutrino Observatory is proposed to extend the all-flavour energy range of IceCube beyond PeV energies. It will comprise two key components: I) An enlarged 8km3 in-ice optical Cherenkov array to measure the continuation of the IceCube astrophysical neutrino flux and improve IceCube\u27s point source sensitivity above ∼100TeV; and II) A very large in-ice radio array with a surface area of about 500km2. Radio waves propagate through ice with a kilometer-long attenuation length, hence a sparse radio array allows us to instrument a huge volume of ice to achieve a sufficient sensitivity to detect neutrinos with energies above tens of PeV. The different signal topologies for neutrino-induced events measured by the optical and in-ice radio detector - the radio detector is mostly sensitive to the cascades produced in the neutrino interaction, while the optical detector can detect long-ranging muon and tau leptons with high accuracy - yield highly complementary information. When detected in coincidence, these signals will allow us to reconstruct the neutrino energy and arrival direction with high fidelity. Furthermore, if events are detected in coincidence with a sufficient rate, they resemble the unique opportunity to study systematic uncertainties and to cross-calibrate both detector components