913 research outputs found
An investigation of aeroelastic phenomena associated with an oblique winged aircraft
Oblique wing aeroelasticity studies are reviewed. The static aeroelastic stability characteristics of oblique wing aircraft, lateral trim requirements for 1-g flight, and the dynamic aeroelastic stability behavior of oblique winged aircraft, primarily flutter, are among the topics studied. The similarities and differences between oblique winged aircraft and conventional, bilaterally symmetric, swept wing aircraft are emphasized
Interactive aircraft flight control and aeroelastic stabilization
Several examples are presented in which flutter involving interaction between flight mechanics modes and elastic wind bending occurs for a forward swept wing flight vehicle. These results show the basic mechanism by which the instability occurs and form the basis for attempts to actively control such a vehicle
Dynamics and control of forward swept wing aircraft
Aspects of non-zero differential game theory with application to multivariable control synthesis and optimal linear control law design using optimum parameter sensitivity analysis are discussed
Flutter of asymmetrically swept wings
Two formulations of the oblique wing flutter problem are presented; one formulation allows only simple wing bending deformations and rigid body roll as degrees of freedom, while the second formulation includes a more complex bending-torsional deformation together with the roll freedom. Flutter is found to occur in two basic modes. The first mode is associated with wing bending-aircraft roll coupling and occurs at low values of reduced frequency. The second instability mode closely resembles a classical bending-torsion wing flutter event. This latter mode occurs at much higher reduced frequencies than the first. The occurrence of the bending-roll coupling mode is shown to lead to lower flutter speeds while the bending-torsion mode is associated with higher flutter speeds. The ratio of the wing mass moment of inertia in roll to the fuselage roll moment of inertia is found to be a major factor in the determination of which of the two instabilities is critical
An exact plane-stress solution for a class of problems in orthotropic elasticity
An exact solution for the stress field within a rectangular slab of orthotropic material is found using a two dimensional Fourier series formulation. The material is required to be in plane stress, with general stress boundary conditions, and the principle axes of the material must be parallel to the sides of the rectangle. Two load cases similar to those encountered in materials testing are investigated using the solution. The solution method has potential uses in stress analysis of composite structures
An application of control theory methods to the optimization of structures having dynamic or aeroelastic constraints
Optimal control models for design of structures with weights minimized by constraints involving fixed eigenvalue
An investigation of supersonic aeroelastic characteristics of oblique winged aircraft
Two formulations of the oblique wing flutter problem are presented: one formulation allows wing bending deformations and the rigid body roll degree of freedom while the second formulation includes bending-torsional deformation and roll degrees of freedom. Flutter is found to occur in two basic modes. The first mode is associated with bending-roll coupling and occurs at low reduced frequency values. The other instability mode is primarily one of classical bending-torsion with negligible roll coupling; this mode occurs at much higher reduced frequencies. The occurrence of bending-roll coupling mode leads to lower flutter speeds while the bending-torsion mode is associated with higher flutter speeds. The ratio of the wing mass moment of inertial in roll to the fuselage moment of inertia evidently plays a major role in the determination of which of the two instabilities is critical
Interactive aircraft flight control and aeroelastic stabilization
Aeroservoelastic optimization techniques were studied to determine a methodology for maximization of the stable flight envelope of an idealized, actively controlled, flexible airfoil. The equations of motion for the airfoil were developed in state-space form to include time-domain representations of aerodynamic forces and active control. The development of an optimization scheme to stabilize the aeroelastic system over a range of airspeeds, including the design airspeed is outlined. The solution approach was divided in two levels: (1) the airfoil structure, with a design variable represented by the shear center position; and (2) the control system. An objective was stated in mathematical form and a search was conducted with the restriction that each subsystem be constrained to be optimal in some sense. Analytical expressions are developed to compute the changes in the eigenvalues of the closed-loop, actively controlled system. A stability index is constructed to ensure that stability is present at the design speed and at other airspeeds away from the design speed
Progress in aeroelastic optimization - Analytical versus numerical approaches
Mathematical and structural analysis for optimal control of aeroelasticity in unswept wing
- …