38,234 research outputs found
Forced oscillations in relativistic accretion disks and QPOs
In this work we explore the idea that the high frequency QPOs observed in
LMXBs may be explained as a resonant coupling between the neutron star spin and
epicyclic modes of accretion disk oscillations. We propose a new model for
these QPOs based on forced oscillations induced in the accretion disk due to a
stellar asymmetric rotating gravitational or magnetic field. It is shown that
particles evolving in a rotating non-axisymmetric field are subject to three
kinds of resonances: a corotation resonance, a Lindblad resonance due to a
driving force, and a parametric resonance due to the time varying epicyclic
frequencies. These results are extends by means of 2D numerical simulations of
a simplified version of the accretion disk. The simulations are performed for
the Newtonian gravitational potential, as well as for a pseudo-general
relativistic potential, which enables us to explore the behavior of the
resonances around both rotating neutron stars and black holes. Density
perturbations are only significant in the region located close to the inner
edge of the disk near the ISCO where the gravitational or magnetic perturbation
is maximal. It is argued that the nearly periodic motion induced in the disk
will produce high quality factor QPOs.
Finally, applying this model to a typical neutron star, we found that the
strongest response occurs when the frequency difference of the two modes equals
either the spin frequency (for "slow rotators") or half of it (for "fast
rotators"). The two main excited modes may both be connected to vertical
oscillations of the disk. We emphasize that strong gravity is not needed to
excite the modes.Comment: Proceedings of the 363. WE-Heraeus Seminar on: Neutron Stars and
Pulsars (Posters and contributed talks) Physikzentrum Bad Honnef, Germany,
May.14-19, 2006, eds. W.Becker, H.H.Huang, MPE Report 291, pp.189-19
Polarisation of high-energy emission in a pulsar striped wind
Recent observations of the polarisation of the optical pulses from the Crab
pulsar motivated detailed comparative studies of the emission predicted by the
polar cap, the outer gap and the two-pole caustics models.
In this work, we study the polarisation properties of the synchrotron
emission emanating from the striped wind model. We use an explicit asymptotic
solution for the large-scale field structure related to the oblique split
monopole and valid for the case of an ultra-relativistic plasma. This is
combined with a crude model for the emissivity of the striped wind and of the
magnetic field within the dissipating stripes themselves. We calculate the
polarisation properties of the high-energy pulsed emission and compare our
results with optical observations of the Crab pulsar. The resulting radiation
is linearly polarised. In the off-pulse region, the electric vector lies in the
direction of the projection on the sky of the rotation axis of the pulsar, in
good agreement with the data. Other properties such as a reduced degree of
polarisation and a characteristic sweep of the polarisation angle within the
pulses are also reproduced.Comment: Proceedings of the 363. WE-Heraeus Seminar on: Neutron Stars and
Pulsars (Posters and contributed talks) Physikzentrum Bad Honnef, Germany,
May.14-19, 2006, eds. W.Becker, H.H.Huang, MPE Report 291, pp.108-11
Recommended from our members
Systematic alteration of ATAC-seq for profiling open chromatin in cryopreserved nuclei preparations from livestock tissues.
The use of Assay for Transposase-Accessible Chromatin (ATAC-seq) to profile chromatin accessibility has surged over the past years, but its applicability to tissues has been very limited. With the intent of preserving nuclear architecture during long-term storage, cryopreserved nuclei preparations from chicken lung were used to optimize ATAC-seq. Sequencing data were compared with existing DNase-seq, ChIP-seq, and RNA-seq data to evaluate library quality, ultimately resulting in a modified ATAC-seq method capable of generating high quality chromatin accessibility data from cryopreserved nuclei preparations. Using this method, nucleosome-free regions (NFR) identified in chicken lung overlapped half of DNase-I hypersensitive sites, coincided with active histone modifications, and specifically marked actively expressed genes. Notably, sequencing only the subnucleosomal fraction dramatically improved signal, while separation of subnucleosomal reads post-sequencing did not improve signal or peak calling. The broader applicability of this modified ATAC-seq technique was tested using cryopreserved nuclei preparations from pig tissues, resulting in NFR that were highly consistent among biological replicates. Furthermore, tissue-specific NFR were enriched for binding motifs of transcription factors related to tissue-specific functions, and marked genes functionally enriched for tissue-specific processes. Overall, these results provide insights into the optimization of ATAC-seq and a platform for profiling open chromatin in animal tissues
Content Based Image Retrieval by Convolutional Neural Networks
Hamreras S., BenĂtez-Rochel R., Boucheham B., Molina-Cabello M.A., LĂłpez-Rubio E. (2019) Content Based Image Retrieval by Convolutional Neural Networks. In: FerrĂĄndez Vicente J., Ălvarez-SĂĄnchez J., de la Paz LĂłpez F., Toledo Moreo J., Adeli H. (eds) From Bioinspired Systems and Biomedical Applications to Machine Learning. IWINAC 2019. Lecture Notes in Computer Science, vol 11487. Springer.In this paper, we present a Convolutional Neural Network (CNN) for feature extraction in Content based Image Retrieval (CBIR). The proposed CNN aims at reducing the semantic gap between low level and high-level features. Thus, improving retrieval results. Our CNN is the result of a transfer learning technique using Alexnet pretrained network. It learns how to extract representative features from a learning database and then uses this knowledge in query feature extraction. Experimentations performed on Wang (Corel 1K) database show a significant improvement in terms of precision over the state of the art classic approaches.Universidad de MĂĄlaga. Campus de Excelencia Internacional AndalucĂa Tech
Itinerant ferromagnetism and intrinsic anomalous Hall effect in amorphous iron-germanium
The amorphous iron-germanium system (a-FexGe1-x) lacks long-range structural order and hence lacks a meaningful Brillouin zone. The magnetization of a-FexGe1-x is well explained by the Stoner model for Fe concentrations x above the onset of magnetic order around x=0.4, indicating that the local order of the amorphous structure preserves the spin-split density of states of the Fe-3d states sufficiently to polarize the electronic structure despite k being a bad quantum number. Measurements reveal an enhanced anomalous Hall resistivity ÏxyAH relative to crystalline FeGe; this ÏxyAH is compared to density-functional theory calculations of the anomalous Hall conductivity to resolve its underlying mechanisms. The intrinsic mechanism, typically understood as the Berry curvature integrated over occupied k states but shown here to be equivalent to the density of curvature integrated over occupied energies in aperiodic materials, dominates the anomalous Hall conductivity of a-FexGe1-x (0.38â€xâ€0.61). The density of curvature is the sum of spin-orbit correlations of local orbital states and can hence be calculated with no reference to k space. This result and the accompanying Stoner-like model for the intrinsic anomalous Hall conductivity establish a unified understanding of the underlying physics of the anomalous Hall effect in both crystalline and disordered systems
Design considerations for the brushless doubly-fed (induction) machine
© The Institution of Engineering and Technology. A design procedure for the brushless doubly-fed machine is based on equations derived from a simplified equivalent circuit. The method allows the many variables in the design of this machine to be handled in a straightforward way. Relationships are given for the division of slot area between the two stator windings and for the design of the magnetic circuit. The design method is applied to a frame size 180 machine. In particular, calculated values for flux densities in the machine have been verified by time stepping finite element analysis for actual operating conditions. The approach outlined can also be used as part of a design optimisation routine
The Priority of Exploiting Fiscal Revenue or Lessening Public Expenditure: Evidence from China
In the past 28 years, we find that except for the fiscal revenue of 5,132.1 billion yuan in 2007, which is greater than the fiscal expenditure of 4,978.1 billion yuan, presenting a fiscal surplus, the fiscal expenditure of the rest years is greater than the fiscal revenue, showing the situation of public sector net cash requirement (psncr), especially in 2011, the deficit( the gap between fiscal expenditure and fiscal revenue) is 537.3 billion yuan. Since then, the gap between expenditure and revenue has been increasing with each passing year. In 2015, the fiscal deficit is 2,368 billion yuan. In 2018, the fiscal deficit has been expanded to 3,754.4 billion yuan. In order to avoid the continuous increment of the deficit. This paper discusses the causal relationship between China's fiscal revenue and public expenditure from 1990 to 2018. If fiscal revenue has a positive impact on public expenditure, showing that the government shall reduce fiscal deficit through tax increment. On the contrary, it makes public expenditure continue to expand, leading to the continuous deterioration of fiscal deficit, so as to further decide whether China's future fiscal policy should adopt increasing fiscal revenue or deducting public expenditure policy to reduce the deficit
Seeds Buffering for Information Spreading Processes
Seeding strategies for influence maximization in social networks have been
studied for more than a decade. They have mainly relied on the activation of
all resources (seeds) simultaneously in the beginning; yet, it has been shown
that sequential seeding strategies are commonly better. This research focuses
on studying sequential seeding with buffering, which is an extension to basic
sequential seeding concept. The proposed method avoids choosing nodes that will
be activated through the natural diffusion process, which is leading to better
use of the budget for activating seed nodes in the social influence process.
This approach was compared with sequential seeding without buffering and single
stage seeding. The results on both real and artificial social networks confirm
that the buffer-based consecutive seeding is a good trade-off between the final
coverage and the time to reach it. It performs significantly better than its
rivals for a fixed budget. The gain is obtained by dynamic rankings and the
ability to detect network areas with nodes that are not yet activated and have
high potential of activating their neighbours.Comment: Jankowski, J., Br\'odka, P., Michalski, R., & Kazienko, P. (2017,
September). Seeds Buffering for Information Spreading Processes. In
International Conference on Social Informatics (pp. 628-641). Springe
Regression with Linear Factored Functions
Many applications that use empirically estimated functions face a curse of
dimensionality, because the integrals over most function classes must be
approximated by sampling. This paper introduces a novel regression-algorithm
that learns linear factored functions (LFF). This class of functions has
structural properties that allow to analytically solve certain integrals and to
calculate point-wise products. Applications like belief propagation and
reinforcement learning can exploit these properties to break the curse and
speed up computation. We derive a regularized greedy optimization scheme, that
learns factored basis functions during training. The novel regression algorithm
performs competitively to Gaussian processes on benchmark tasks, and the
learned LFF functions are with 4-9 factored basis functions on average very
compact.Comment: Under review as conference paper at ECML/PKDD 201
- âŠ