Generic skills requirements (KSA model) towards future mechanical engineers using discriminant analysis

Generic Skills is a basic requirement that engineers need to master in all areas of Engineering. This study was conducted throughout the peninsular Malaysia involving small, medium and heavy industries using the KSA Model. The objectives of this study are studying the level of requirement of Generic Skills that need to be mastered in order to become a competitive Mechanical Engineer and identifying the most dominant Generic Skills required by the industry/employer towards the future of the Mechanical Engineer. The set of questionnaires distributed to respondents was analyzed using software XLSTAT2014 software to obtain Descriptive Statistics and Discriminant Analysis (DA) as required to achieve the objective of the study. This study will guide all future engineers, especially in the field of Mechanical Engineering in Malaysia to penetrate the job market according to the current market needs.Keywords: generic skills; KSA model; mechanical engineers; discriminant analysi

Optical properties of diamond like carbon films prepared by DC-PECVD

Diamond-like carbon (DLC) thin films were deposited at different substrate temperatures using methane and hydrogen gas in DC-PECVD at 2x10-1Torr. From the light transmission using UV-VIS spectroscopy it was found that the optical transition had changed from allowed indirect transition to allowed direct transition as the substrate temperature increased. The Optical gap increased with temperature, highest of 3.034 eV was observed at 573 K, beyond which it dropped. Colour of the film changed from light brownish to a colourless transparent film in the higher temperature. The Urbach energy decreased from 1.25 eV to 0.75 eV with increasing substrate temperature till 573 K and a slight increase after it. This trend is attributed to change in sp3/sp2 ratio or change in structure. The cluster size decreases with temperature, resulting in larger band gap and the structure more ordered. Similar pattern is also witnessed in the emission spectrum of the photoluminescence

Impact of stabilization environment and heating rates on P84 co-polyimide/nanocrystaline cellulose carbon membrane for hydrogen enrichment

These past few decades, the separation of various gas mixtures problems in order to obtain high purity gases can be overcome by the introduction of membrane-based technology. This current research was focusing on the development of tubular carbon membranes (TCMs) from polymeric precursors for the separation of hydrogen and nitrogen. The fabrication of TCMs involved the dip coating technique and was using P84 co-polyimide as the main precursor by blending of nanocrystaline cellulose (NCC) as an additive. It was believed a slight adjustment on time, temperature, or environment of the carbonization protocol for the commercially available PI/NCC membranes can alter the final properties of the carbons produced. The modifications on the carbonization parameters such as stabilization conditions and heating rates during fabrication of PI/NCC-based carbon membranes could also affect their gas separation performance. A large variety of TCMs for gas separation have been developed by simple carbonization of a PI/NCC deposited on a ceramic tubular support. Herein, in this study, the effect of different heating rates (1, 3, 5, and 7 °C/min) and stabilization environment (Argon, Nitrogen, and Helium) were investigated for all resultant TCMs. As a result, it was observed that stabilization under Argon environment with heating rate of 3 °C/min produced carbon membranes with the best H2/N2 separation and the highest selectivity of 434.68 ± 1.39, respectively

Analysis of human bradykinin receptor gene and endothelial nitric oxide synthase gene polymorphisms in end-stage renal disease among Malaysians

The aim of this study was to determine the association of the c.894G>T; p.Glu298Asp polymorphism and the variable number tandem repeat (VNTR) polymorphism of the endothelial nitric oxide synthase (eNOS) gene and c.181C>T polymorphism of the bradykinin type 2 receptor gene (B2R) in Malaysian end-stage renal disease (ESRD) subjects. A total of 150 ESRD patients were recruited from the National Kidney Foundation’s (NKF)dialysis centers in Malaysia and compared with 150 normal healthy individuals. Genomic DNA was extracted from buccal cells of all the subjects. The polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) method was carried out to amplify the products and the restricted fragments were separated by agarose gel electrophoresis. Statistical analyses were carried out using software where a level of p T, 4b/a) and eNOS gene (c.894G>T) polymorphisms were not statistically significant (p >0.05) when compared to the control subjects. The B2R and eNOS gene polymorphisms may not be considered as genetic susceptibility markers for Malaysian ESRD subjects

Increasing T-method accuracy through application of robust M-estimatior

Mahalanobis Taguchi System is an analytical tool involving classification, clustering as well as prediction techniques. T-Method which is part of it is a multivariate analysis technique designed mainly for prediction and optimization purposes. The good things about T-Method is that prediction is always possible even with limited sample size. In applying T-Method, the analyst is advised to clearly understand the trend and states of the data population since this method is good in dealing with limited sample size data but for higher samples or extremely high samples data it might have more things to ponder. T-Method is not being mentioned robust to the effect of outliers within it, so dealing with high sample data will put the prediction accuracy at risk. By incorporating outliers in overall data analysis, it may contribute to a non-normality state beside the entire classical methods breakdown. Considering the risk towards lower prediction accuracy, it is important to consider the risk of lower accuracy for the individual estimates so that the overall prediction accuracy will be increased. Dealing with that intention, there exist several robust parameters estimates such as M-estimator, that able to give good results even with the data contain or may not contain outliers in it. Generalized inverse regression estimator (GIR) also been used in this research as well as Ordinary Lease Square Method (OLS) as part of comparison study. Embedding these methods into T-Method individual estimates conditionally helps in enhancing the accuracy of the T-Method while analyzing the robustness of T-method itself. However, from the 3 main case studies been used within this analysis, it shows that T-Method contributed to a better and acceptable performance with error percentages range 2.5% ~ 22.8% between all cases compared to other methods. M-estimator is proved to be sensitive with data consist of leverage point in x-axis as well as data with limited sample size. Referring to these 3 case studies only, it can be concluded that robust M-estimator is not feasible to be applied into T-Method as of now. Further enhance analysis is needed to encounter issues such as Airfoil noise case study data which T -method contributed to highest error% prediction. Hence further analysis need to be done for better result review

Electrospun nanofiber-coated membrane: a review

The nanofibre development offers various useful applications in many ways including energy and environmental application. Polymeric nanofibre fabricated by electrospinning has been seen as innovative membrane materials for water remediation owing to the high surface area, interconnected porous structure, and light weight. This paper reviews the exciting functionality of nanofibre involving the development of smart heterogeneous approaches in membrane material. These heterogeneous materials allow the water molecules to spontaneously penetrate from one side to another, while blocking penetration in reverse direction due to hydrophilic-hydrophobic differences. Composite membrane containing different features arrangements of nanofibres have been utilised for their ability for water applications especially in membrane distillation

A Strategies of Success Virtual Mobility for Technical Students

Student mobility program have risen to the top of local universities' worldwide priorities. In addition to giving university students the chance to learn about different cultures, this programme helps expose them to various study strategies. Mobility programmes should adopt a new strategy in the age of Revolution Industry 4.0 and use technology as the vehicle for implementation. This study aims to determine whether virtual mobility programmes are appropriate for implementation, the level of students' knowledge regarding virtual mobility implementation, the reasons why students joined virtual mobility programmes, and the kinds of media that students anticipated using when participating in virtual mobility. Quantitative method was used with survey questionnaire to collect the data. A total of 304 students of Malaysian Technical Higher Institution were involved as a sample in this study also descriptive and inferential analysis were employed to this study. The findings showed that virtual mobility can be seen as an alternative for conventional mobility and it still has an impact on students’ soft skills. Besides, the data showed that the level of students’ knowledge towards the implementation of virtual mobility is moderate and majority of the respondents decided to join the virtual mobility program because they could develop their information technology skills. Meanwhile, most of the respondents expected to use internet as a main medium to join the virtual mobility program

Determining Characteristics of the Software Components Reusability for Component Based Software Development

Nowadays, due to the availability of many alternatives of common-off-the-shelf software components, Component-based Software Development (CBSD) is becoming a popular approach to software development. CBSD is the software development with the assembly of existing software components. There are many characteristics and sub characteristics for software component reusability available today. The challenge is how to determine the suitable characteristics and sub characteristics reusable component for CBSD. The aim of this study is to determine the suitability of characteristics and sub characteristics for software component reusability for CBSD. The survey is conducted among of software reuse practitioners at Universiti Malaysia Terengganu. The finding from the empirical study conducted that involves software developers and practitioners as the respondents will be used in development of metrics for reusable component. This metrics can be used to measure the reusable component for CBSD

Effect of substrate placement in schott vial to hematite properties

In the present study, hematite (α-Fe2O3) nanostructures were deposited on fluorine doped tin oxide (FTO) coated glass substrate using sonicated immersion synthesis method. The effect of FTO glass substrate placement in Schott vial during immersion process was studied on the growth of the hematite nanostructure and its properties. XRD pattern has revealed seven diffraction peaks of α-Fe2O3 for both hematite nanostructures samples attributed to polycrystalline with rhombohedral lattice structure. The surface morphologies from FESEM have shown that the hematite nanostructures were grown uniformly in both samples with FTO conductive layer facing up and down. Hematite sample with FTO facing down exhibits a smaller size of nanorod, 26.7 nm average diameter, compared to the hematite sample that FTO face up with 53.8nm average diameter. Optical properties revealed higher transmittance in the sample with FTO facing down, probably due to smaller size of nanostructure. The optical band gap energy plotted and extrapolated at 2.50eV and 2.55eV for FTO face up and FTO face down hematite samples respectively, presenting the sample with FTO face up has a lower optical bandgap energy

A case report of Hymenolepis diminuta infection in a Malaysian child

We report a case of Hymenolepis diminuta infection in a 2-year-old Malaysian child. This case was initially reported as ‘normal’ after the examination of proglottids shed from the anus of the child at a private laboratory on two occasions. The putative proglottids shed was then referred to the Parasite Southeast Asia Diagnostic (Para:SEAD) Laboratory, Department of Parasitology, Faculty of Medicine, University of Malaya for further examination. Microscopic examination confirmed that the child was infected with H. diminuta based on the characteristic eggs found in the proglottids. She was treated with a single dose praziquantel (20 mg/kg of body weight) and recovered well