Design and Develop Virtual Mobile Voting Application Based Agent Classification for University Campus

Today's, mobile applications have brought the different advantages for accessing and sharing information over wireless application protocol (WAP). There are difficulties for accessing and searching information especially in the rural communities. Hence, the study aimed to develop a mobile application for accessing and retrieving user queries over WAP technology. Moreover, the proposed application will provide users in rural communities with their request information about different events, such as (News, clinics, stations, and other events). Furthermore, Application Development Modified Methodology (Charles, 1995) has been used for building the proposed application. Finally, the proposed application has been evaluated and the obtained results have been produces

Parameter estimation and control design of solar maximum power point tracking

Parameters evaluation, design, and intelligent control of the solar photovoltaic model are presented in this work. The parameters of zeta converters such as a rating of an inductor, capacitor, and switches for a particular load are evaluated its values to compare the trade of the existing model and promoted to research in the proposed area. The zeta converter is pulsed through intelligent controller-based maximum power point tracking (intelligent-MPPT). The intelligent controller is a fuzzy logic controller (FLC) which extracts maximum power from the solar panel using the zeta converter. The performance of evaluated parameters based on the solar system and zeta converter is seen by an intelligent control algorithm. Moreover, evaluated parameters of solar photovoltaic (PV) and zeta converter can be examined the performance of fuzzy based intelligent MPPT under transient and steady-state conditions with different solar insolation. The brushless direct current motor-based water pump is used as the direct control (DC) load of the proposed model. The proposed model can enhance the research and assist to develop a new configuration of the present system

Synthesis and Spectral Analysis of Some Metal Ions Complexes with Mixed Ligands of Schiff Base and 1, 10-Phenanthroline

The free Schiff base ligand (HL1) is prepared by being mixed with the co-ligand 1, 10-phenanthroline (L2). The product then is reacted with metal ions: (Cr+3, Fe+3, Co+2, Ni+2, Cu+2 and Cd+2) to get new metal ion complexes. The ligand is prepared and its metal ion complexes are characterized by physic-chemical spectroscopic techniques such as: FT-IR, UV-Vis, spectra, mass spectrometer, molar conductivity, magnetic moment, metal content, chloride content and microanalysis (C.H.N) techniques. The results show the formation of the free Schiff base ligand (HL1). The fragments of the prepared free Schiff base ligand are identified by the mass spectrometer technique. All the analysis of ligand and its metal complexes are in good agreement with the theoretical values indicating the purity of Schiff base ligand and the metal complexes. From the above data, the molecular structures for all the metal complexes are proposed to be octahedra

Incidence of orbital, conjunctival and lacrimal gland malignant tumors in USA from Surveillance, Epidemiology and End Results, 1973-2009

AIM: To determine the types and incidence of tumors affecting the orbit, conjunctiva and lacrimal glands and to study the trend line of these tumors in the United States from 1973 to 2009. METHODS: We used the publicly available Surveillance, Epidemiology and End Results (SEER) database registries to determine the incidence rates. Age was adjusted to the 2000 US Standard Population. Patients were stratified according to age group, gender, race and histological grouping of tumor lesions. Three age groups were defined: 0-19, 20-49 and ≥50y. Annual percentage changes were calculated to examine trends. RESULTS: The overall age adjusted incidence rate was 3.39 (95%CI: 3.27-3.52) per million person-years. The tumors were more prevalent in age group ≥50 counting 9.51 (95%CI: 9.11-9.92) per million person-years. Most of the soft tissue sarcomas occurred in the young age with incidence rate of 0.35 (95%CI: 0.28-0.42) per million person-years. Lymphomas were the dominant subtype in the adult population with incidence rate of 5.74 (95%CI: 5.43-6.06) per million person-years. Incidence rates were higher in males than females with an overall rate ratio of 1.31 (95%CI: 1.21-1.41) mainly caused by the increase in carcinoma subtypes. White race had a higher tumor incidence with a rate ratio of 1.47(95%CI: 1.25-1.73) driven by the higher incidence of most histological subtypes. Orbital tumors showed a higher incidence rate followed by conjunctival and lacrimal gland tumors with incidence rates of 1.59, 1.37 and 0.43 per million person-years respectively. The trend line of overall incidence of tumors showed a significant increase (APC=3.11, 95%CI: 2.61-3.61) mainly due to increase of lymphomas. This increase was higher than the increase of lymphomas at other sites. CONCLUSION: Orbital, conjunctival and lacrimal gland malignant tumors differ among children and adults. Over the years there has been a noticeable increase in incidence rates of orbital and lacrimal gland tumors mainly caused by an increase in lymphomas and an apparent increase due to advances in diagnostic techniques. ICD-O-3 topographical coding should be improved to consider the different orbital bones and ocular structures

Efficiency of Applied Nitrogen Recovery by Midland Bermudagrass under High Fertility and Irrigation

Soil

Selective Photodegradation Using Titanate Nanostructures

Adsorption and photocatalytic degradation are considered as the most important ways of treating water from organic compounds. It would be very useful if the adsorption and photocatalytic properties are combined in the same catalyst used in the treatment. Titania is one of the best well-known photocatalysts. However, due to its poor selectivity, it is unfavorable for photocatalytic removal of highly toxic low-level organic pollutants in wastewater in the presence of other less toxic high-level pollutants. Recent trials to introduce selectivity for titania have been achieved via controlling the catalyst morphology or by modifying the catalyst surface. This chapter summarizes the control of selectivity of titanate nanostructures toward adsorption and/or photocatalytic degradation of toxic organic dyes. In the first part, the effect of morphologies of titanites on selective photocatalytic degradation of three food dyes (color yellow sunset, red allura, and red carmoisine) was discussed. In changing the morphology of titanite, each dye is being preferably adsorbed by one morphology and decomposing more rapidly. In the second part, the selective adsorption and/or photocatalytic degradation of methylene blue dye from mixed dye solution using sodium titanate (NaTNT), cobalt-doped titanate nanotubes (co-doped TNT), and the decorated one with gold nanoparticles has been discussed

Relationship Between Core Compressive Strength and UPV Values for Different Core Slenderness of High Strength Concrete Beam

The compressive strength of core concrete is affected by many parameters and one of them is the strength of the concrete, which affects the strength of the core compressive strength. This is achieved by using correction factors present in several standards such as ASTM C 42/C 42M-04, but this standard was not considered for high and very high strength concrete (HSC). In this study, a beam of (1x 4x 0.2) m constructed with 100 MPa target strength for core samples. Four different core diameters (25-50-75-100) mm and for each diameter different core length-diameter ratios(λ=l/d) (2-1.75-1.5-1.0) were extracted from the beam for assessing the strength in both casting directions. The relationship between the strength of concrete with respect to reference samples and different cores size with different slenderness ratio, length to diameter (λ) were investigated. The Ultrasonic Pulse Velocity (UPV) was conducted for all samples and the relationship between UPV and strength of cores were determined. The results showed that the core strength was increased with the decrease of slenderness ratio. Core samples correction factors to predict the strength of standard cylinder for HSC beam are different from normal strength concrete (NSC) and they have ranged between 1.0 and 1.12 for beam. Relationship between core compressive strength and UPV values are established