596 research outputs found
Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells
Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6% and the longest operational lifetime, T S80, of â300âh, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3âââx Brx perovskite solar cells
Random Field and Random Anisotropy Effects in Defect-Free Three-Dimensional XY Models
Monte Carlo simulations have been used to study a vortex-free XY ferromagnet
with a random field or a random anisotropy on simple cubic lattices. In the
random field case, which can be related to a charge-density wave pinned by
random point defects, it is found that long-range order is destroyed even for
weak randomness. In the random anisotropy case, which can be related to a
randomly pinned spin-density wave, the long-range order is not destroyed and
the correlation length is finite. In both cases there are many local minima of
the free energy separated by high entropy barriers. Our results for the random
field case are consistent with the existence of a Bragg glass phase of the type
discussed by Emig, Bogner and Nattermann.Comment: 10 pages, including 2 figures, extensively revise
Multi-layered Ruthenium-modified Bond Coats for Thermal Barrier Coatings
Diffusional approaches for fabrication of multi-layered Ru-modified bond coats for thermal
barrier coatings have been developed via low activity chemical vapor deposition and high activity
pack aluminization. Both processes yield bond coats comprising two distinct B2 layers, based on
NiAl and RuAl, however, the position of these layers relative to the bond coat surface is reversed
when switching processes. The structural evolution of each coating at various stages of the
fabrication process has been and subsequent cyclic oxidation is presented, and the relevant
interdiffusion and phase equilibria issues in are discussed. Evaluation of the oxidation behavior of
these Ru-modified bond coat structures reveals that each B2 interlayer arrangement leads to the
formation of α-Al 2 O 3 TGO at 1100°C, but the durability of the TGO is somewhat different and in
need of further improvement in both cases
Dust Devil Tracks
Dust devils that leave dark- or light-toned tracks are common on Mars and they can also be found on the Earthâs surface. Dust devil tracks (hereinafter DDTs) are ephemeral surface features with mostly sub-annual lifetimes. Regarding their size, DDT widths can range between âŒ1 m and âŒ1 km, depending on the diameter of dust devil that created the track, and DDT lengths range from a few tens of meters to several kilometers, limited by the duration and horizontal ground speed of dust devils. DDTs can be classified into three main types based on their morphology and albedo in contrast to their surroundings; all are found on both planets: (a) dark continuous DDTs, (b) dark cycloidal DDTs, and (c) bright DDTs. Dark continuous DDTs are the most common type on Mars. They are characterized by their relatively homogenous and continuous low albedo surface tracks. Based on terrestrial and martian in situ studies, these DDTs most likely form when surficial dust layers are removed to expose larger-grained substrate material (coarse sands of â„500 ÎŒm in diameter). The exposure of larger-grained materials changes the photometric properties of the surface; hence leading to lower albedo tracks because grain size is photometrically inversely proportional to the surface reflectance. However, although not observed so far, compositional differences (i.e., color differences) might also lead to albedo contrasts when dust is removed to expose substrate materials with mineralogical differences. For dark continuous DDTs, albedo drop measurements are around 2.5 % in the wavelength range of 550â850 nm on Mars and around 0.5 % in the wavelength range from 300â1100 nm on Earth. The removal of an equivalent layer thickness around 1 ÎŒm is sufficient for the formation of visible dark continuous DDTs on Mars and Earth. The next type of DDTs, dark cycloidal DDTs, are characterized by their low albedo pattern of overlapping scallops. Terrestrial in situ studies imply that they are formed when sand-sized material that is eroded from the outer vortex area of a dust devil is redeposited in annular patterns in the central vortex region. This type of DDT can also be found in on Mars in orbital image data, and although in situ studies are lacking, terrestrial analog studies, laboratory work, and numerical modeling suggest they have the same formation mechanism as those on Earth. Finally, bright DDTs are characterized by their continuous track pattern and high albedo compared to their undisturbed surroundings. They are found on both planets, but to date they have only been analyzed in situ on Earth. Here, the destruction of aggregates of dust, silt and sand by dust devils leads to smooth surfaces in contrast to the undisturbed rough surfaces surrounding the track. The resulting change in photometric properties occurs because the smoother surfaces have a higher reflectance compared to the surrounding rough surface, leading to bright DDTs. On Mars, the destruction of surficial dust-aggregates may also lead to bright DDTs. However, higher reflective surfaces may be produced by other formation mechanisms, such as dust compaction by passing dust devils, as this may also cause changes in photometric properties. On Mars, DDTs in general are found at all elevations and on a global scale, except on the permanent polar caps. DDT maximum areal densities occur during spring and summer in both hemispheres produced by an increase in dust devil activity caused by maximum insolation. Regionally, dust devil densities vary spatially likely controlled by changes in dust cover thicknesses and substrate materials. This variability makes it difficult to infer dust devil activity from DDT frequencies. Furthermore, only a fraction of dust devils leave tracks. However, DDTs can be used as proxies for dust devil lifetimes and wind directions and speeds, and they can also be used to predict lander or rover solar panel clearing events. Overall, the high DDT frequency in many areas on Mars leads to drastic albedo changes that affect large-scale weather patterns
Model-based investigation into atmospheric freeze drying assisted by power ultrasound
Atmospheric freeze drying consists of a convective drying process using air at a temperature below the
freezing point of the processed product, and with a very low relative humidity content. This paper focuses
on the use of a simple one-dimensional model considering moving boundary vapor diffusion to describe
the ultrasonic assisted atmospheric freeze-drying of foodstuffs. The case study is the drying of apple
cubes (8.8 mm) at different air velocities (1, 2, 4 and 6 m/s), temperatures ( 5, 10 and 15 C), without
and with (25, 50 and 75 W) power ultrasound application. By fitting the proposed diffusion model to the
experimental drying kinetics, the effective diffusivity of water vapor in the dried product was estimated.
The model was successfully validated by drying apple samples of different size and geometry (cubes and
cylinders). Finally, a 23 factorial design of experiments revealed that the most relevant operating parameter
affecting the drying time was the applied ultrasound power level.The authors acknowledge the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO) and of the European Regional Development Fund (ERDF) through the project DPI2012-37466-CO3-03, the FPI fellowship (BES-2010-033460) and the EEBB-I-14-08572 fellowship granted to J.V. Santacatalina for a short stay at Politecnico di Torino.Santacatalina Bonet, JV.; Fissore, D.; CĂĄrcel CarriĂłn, JA.; Mulet Pons, A.; GarcĂa PĂ©rez, JV. (2015). Model-based investigation into atmospheric freeze drying assisted by power ultrasound. Journal of Food Engineering. 151:7-15. https://doi.org/10.1016/j.jfoodeng.2014.11.013S71515
Manageable creativity
This article notes a perception in mainstream management theory and practice that creativity has shifted from being disruptive or destructive to 'manageable'. This concept of manageable creativity in business is reflected in a similar rhetoric in cultural policy, especially towards the creative industries. The article argues that the idea of 'manageable creativity' can be traced back to a 'heroic' and a 'structural' model of creativity. It is argued that the 'heroic' model of creativity is being subsumed within a 'structural' model which emphasises the systems and infrastructure around individual creativity rather than focusing on raw talent and pure content. Yet this structured approach carries problems of its own, in particular a tendency to overlook the unpredictability of creative processes, people and products. Ironically, it may be that some confusion in our policies towards creativity is inevitable, reflecting the paradoxes and transitions which characterise the creative process
Explanation for the increase in high altitude water on Mars observed by NOMAD during the 2018 global dust storm
The Nadir and Occultation for MArs Discovery (NOMAD) instrument on board ExoMars Trace Gas Orbiter (TGO) measured a large increase in water vapor at altitudes in the range of 40â100 km during the 2018 global dust storm on Mars. Using a threeâdimensional general circulation model, we examine the mechanism responsible for the enhancement of water vapor in the upper atmosphere. Experiments with different prescribed vertical profiles of dust show that when more dust is present higher in the atmosphere the temperature increases and the amount of water ascending over the tropics is not limited by saturation until reaching heights of 70â100 km. The warmer temperatures allow more water to ascend to the mesosphere. Photochemical simulations show a strong increase in highâaltitude atomic hydrogen following the highâaltitude water vapor increase by a few days
Theory of Two-Dimensional Quantum Heisenberg Antiferromagnets with a Nearly Critical Ground State
We present the general theory of clean, two-dimensional, quantum Heisenberg
antiferromagnets which are close to the zero-temperature quantum transition
between ground states with and without long-range N\'{e}el order. For
N\'{e}el-ordered states, `nearly-critical' means that the ground state
spin-stiffness, , satisfies , where is the
nearest-neighbor exchange constant, while `nearly-critical' quantum-disordered
ground states have a energy-gap, , towards excitations with spin-1,
which satisfies . Under these circumstances, we show that the
wavevector/frequency-dependent uniform and staggered spin susceptibilities, and
the specific heat, are completely universal functions of just three
thermodynamic parameters. Explicit results for the universal scaling functions
are obtained by a expansion on the quantum non-linear sigma model,
and by Monte Carlo simulations. These calculations lead to a variety of
testable predictions for neutron scattering, NMR, and magnetization
measurements. Our results are in good agreement with a number of numerical
simulations and experiments on undoped and lightly-doped .Comment: 81 pages, REVTEX 3.0, smaller updated version, YCTP-xxx
Grain Surface Models and Data for Astrochemistry
AbstractThe cross-disciplinary field of astrochemistry exists to understand the formation, destruction, and survival of molecules in astrophysical environments. Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. A broad consensus has been reached in the astrochemistry community on how to suitably treat gas-phase processes in models, and also on how to present the necessary reaction data in databases; however, no such consensus has yet been reached for grain-surface processes. A team of âŒ25 experts covering observational, laboratory and theoretical (astro)chemistry met in summer of 2014 at the Lorentz Center in Leiden with the aim to provide solutions for this problem and to review the current state-of-the-art of grain surface models, both in terms of technical implementation into models as well as the most up-to-date information available from experiments and chemical computations. This review builds on the results of this workshop and gives an outlook for future directions
- âŠ