Ultrasonic Monitoring of Reaction Bonding Silicon Nitride

A method is discussed to use ultrasonic techniques to monitor the reaction bonding of silicon nitride. Reaction bonding takes place in a nitrogen atmosphere heated up to 1390°C. As with many sensors used in hostile environments, it is difficult to design the ultrasonic sensor in a way that provides optimal clarity of the signal. The sensing system has to be designed within physical limitations on access to the furnace and it has to satisfy considerations on the design of a cooling system for the ultrasonic transducer. These limiting factors have been overcome so that ultrasonic signals have been obtained during processing, albeit with a significant noise level. Signal processing techniques have been developed which make it possible to obtain information on changes in phase velocity and attenuation during reaction bonding. The signal processing techniques have the potential to be implemented in real time for the monitoring of the progress of the reaction. This information can then be used for process control feedback.</p

Inflammatory Markers and Poor Outcome after Stroke: A Prospective Cohort Study and Systematic Review of Interleukin-6

In a prospective cohort study of patient outcomes following stroke, William Whiteley and colleagues find that markers of inflammatory response are associated with poor outcomes. However, addition of these markers to existing prognostic models does not improve outcome prediction

The third international stroke trial (IST-3) of thrombolysis for acute ischaemic stroke

<p>Abstract</p> <p>Background</p> <p>Intravenous recombinant tissue plasminogen activator (rt-PA) is approved for use in selected patients with ischaemic stroke within 3 hours of symptom onset. IST-3 seeks to determine whether a wider range of patients may benefit.</p> <p>Design</p> <p>International, multi-centre, prospective, randomized, open, blinded endpoint (PROBE) trial of intravenous rt-PA in acute ischaemic stroke. Suitable patients must be assessed and able to start treatment within 6 hours of developing symptoms, and brain imaging must have excluded intracerebral haemorrhage. With 1000 patients, the trial can detect a 7% absolute difference in the primary outcome. With3500 patients, it can detect a 4.0% absolute benefit & with 6000, (mostly treated between 3 & 6 hours), it can detect a 3% benefit.</p> <p>Trial procedures</p> <p>Patients are entered into the trial by telephoning a fast, secure computerised central randomisation system or via a secure web interface. Repeat brain imaging must be performed at 24–48 hours. The scans are reviewed 'blind' by expert readers. The primary measure of outcome is the proportion of patients alive and independent (Modified Rankin 0–2) at six months (assessed via a postal questionnaire mailed directly to the patient). Secondary outcomes include: events within 7 days (death, recurrent stroke, symptomatic intracranial haemorrhage), outcome at six months (death, functional status, EuroQol).</p> <p>Trial registration</p> <p>ISRCTN25765518</p

Global patient outcomes after elective surgery: prospective cohort study in 27 low-, middle- and high-income countries.

BACKGROUND: As global initiatives increase patient access to surgical treatments, there remains a need to understand the adverse effects of surgery and define appropriate levels of perioperative care. METHODS: We designed a prospective international 7-day cohort study of outcomes following elective adult inpatient surgery in 27 countries. The primary outcome was in-hospital complications. Secondary outcomes were death following a complication (failure to rescue) and death in hospital. Process measures were admission to critical care immediately after surgery or to treat a complication and duration of hospital stay. A single definition of critical care was used for all countries. RESULTS: A total of 474 hospitals in 19 high-, 7 middle- and 1 low-income country were included in the primary analysis. Data included 44 814 patients with a median hospital stay of 4 (range 2-7) days. A total of 7508 patients (16.8%) developed one or more postoperative complication and 207 died (0.5%). The overall mortality among patients who developed complications was 2.8%. Mortality following complications ranged from 2.4% for pulmonary embolism to 43.9% for cardiac arrest. A total of 4360 (9.7%) patients were admitted to a critical care unit as routine immediately after surgery, of whom 2198 (50.4%) developed a complication, with 105 (2.4%) deaths. A total of 1233 patients (16.4%) were admitted to a critical care unit to treat complications, with 119 (9.7%) deaths. Despite lower baseline risk, outcomes were similar in low- and middle-income compared with high-income countries. CONCLUSIONS: Poor patient outcomes are common after inpatient surgery. Global initiatives to increase access to surgical treatments should also address the need for safe perioperative care. STUDY REGISTRATION: ISRCTN5181700

Measurements of Higgs bosons decaying to bottom quarks from vector boson fusion production with the ATLAS experiment at √=13TeV

The paper presents a measurement of the Standard Model Higgs Boson decaying to b-quark pairs in the vector boson fusion (VBF) production mode. A sample corresponding to 126 fb−1 of s√=13TeV proton–proton collision data, collected with the ATLAS experiment at the Large Hadron Collider, is analyzed utilizing an adversarial neural network for event classification. The signal strength, defined as the ratio of the measured signal yield to that predicted by the Standard Model for VBF Higgs production, is measured to be 0.95+0.38−0.36 , corresponding to an observed (expected) significance of 2.6 (2.8) standard deviations from the background only hypothesis. The results are additionally combined with an analysis of Higgs bosons decaying to b-quarks, produced via VBF in association with a photon

Muon reconstruction and identification efficiency in ATLAS using the full Run 2 pp collision data set at \sqrt{s}=13 TeV

This article documents the muon reconstruction and identification efficiency obtained by the ATLAS experiment for 139 \hbox {fb}^{-1} of pp collision data at \sqrt{s}=13 TeV collected between 2015 and 2018 during Run 2 of the LHC. The increased instantaneous luminosity delivered by the LHC over this period required a reoptimisation of the criteria for the identification of prompt muons. Improved and newly developed algorithms were deployed to preserve high muon identification efficiency with a low misidentification rate and good momentum resolution. The availability of large samples of Z\rightarrow \mu \mu and J/\psi \rightarrow \mu \mu decays, and the minimisation of systematic uncertainties, allows the efficiencies of criteria for muon identification, primary vertex association, and isolation to be measured with an accuracy at the per-mille level in the bulk of the phase space, and up to the percent level in complex kinematic configurations. Excellent performance is achieved over a range of transverse momenta from 3 GeV to several hundred GeV, and across the full muon detector acceptance of |\eta |<2.7

The ATLAS inner detector trigger performance in pp collisions at 13 TeV during LHC Run 2

The design and performance of the inner detector trigger for the high level trigger of the ATLAS experiment at the Large Hadron Collider during the 2016-2018 data taking period is discussed. In 2016, 2017, and 2018 the ATLAS detector recorded 35.6 fb(-1), 46.9 fb(-1), and 60.6 fb(-1) respectively of proton-proton collision data at a centre-of-mass energy of 13TeV. In order to deal with the very high interaction multiplicities per bunch crossing expected with the 13TeV collisions the inner detector trigger was redesigned during the long shutdown of the Large Hadron Collider from 2013 until 2015. An overview of these developments is provided and the performance of the tracking in the trigger for the muon, electron, tau and b-jet signatures is discussed. The high performance of the inner detector trigger with these extreme interaction multiplicities demonstrates how the inner detector tracking continues to lie at the heart of the trigger performance and is essential in enabling the ATLAS physics programme

Measurements of W+W−+ ≥ 1 jet production cross-sections in pp collisions at s \sqrt{s} = 13 TeV with the ATLAS detector

Fiducial and differential cross-section measurements of W+W− production in association with at least one hadronic jet are presented. These measurements are sensitive to the properties of electroweak-boson self-interactions and provide a test of perturbative quantum chromodynamics and the electroweak theory. The analysis is performed using proton-proton collision data collected at p s = 13TeV with the ATLAS experiment, corresponding to an integrated luminosity of 139 fb−1. Events are selected with exactly one oppositely charged electron-muon pair and at least one hadronic jet with a transverse momentum of pT > 30 GeV and a pseudorapidity of |�| < 4.5. After subtracting the background contributions and correcting for detector effects, the jet-inclusive W+W−+ � 1 jet fiducial cross-section and W+W−+ jets differential cross-sections with respect to several kinematic variables are measured. These measurements include leptonic quantities, such as the lepton transverse momenta and the transverse mass of the W+W− system, as well as jet-related observables such as the leading jet transverse momentum and the jet multiplicity. Limits on anomalous triple-gauge-boson couplings are obtained in a phase space where interference between the Standard Model amplitude and the anomalous amplitude is enhanced