348 research outputs found

    Risk factors for bacterial catheter colonization in regional anaesthesia

    Get PDF
    BACKGROUND: Although several potential risk factors have been discussed, risk factors associated with bacterial colonization or even infection of catheters used for regional anaesthesia are not very well investigated. METHODS: In this prospective observational trial, 198 catheters at several anatomical sites where placed using a standardized technique. The site of insertion was then monitored daily for signs of infection (secretion at the insertion site, redness, swelling, or local pain). The catheters were removed when clinically indicated (no or moderate postoperative pain) or when signs of potential infection occurred. After sterile removal they were prospectively analyzed for colonization, defined as > 15 colony forming units. RESULTS: 33 (16.7%) of all catheters were colonized, and 18 (9.1%) of these with additional signs of local inflammation. Two of these patients required antibiotic treatment due to superficial infections. Stepwise logistic regression analysis was used to identify factors associated with catheter colonization. Out of 26 potential factors, three came out as statistically significant. Catheter placement in the groin (odds-ratio and 95%-confidence interval: 3.4; 1.5–7.8), and repeated changing of the catheter dressing (odds-ratio: 2.1; 1.4–3.3 per removal) increased the risk for colonization, whereas systemic antibiotics administered postoperatively decreased it (odds ratio: 0.41; 0.12–1.0). CONCLUSION: Colonization of peripheral and epidural nerve catheter can only in part be predicted at the time of catheter insertion since two out of three relevant variables that significantly influence the risk can only be recorded postoperatively. Catheter localisation in the groin, removal of the dressing and omission of postoperative antibiotics were associated with, but were not necessarily causal for bacterial colonization. These factors might help to identify patients who are at increased risk for catheter colonization

    Variations of endonasal anatomy: relevance for the endoscopic endonasal transsphenoidal approach

    Get PDF
    Contains fulltext : 87525.pdf (publisher's version ) (Closed access)BACKGROUND: The endoscopic endonasal transsphenoidal approach (EETA) to the pituitary is performed by ear, nose, and throat (ENT) surgeons in collaboration with neurosurgeons but also by neurosurgeons alone even though neurosurgeons have not been trained in rhinological surgery. PURPOSE: To register the frequency of endonasal anatomical variations and to evaluate whether these variations hinder the progress of EETA and require extra rhinological surgical skills. METHODS: A prospective cohort study of 185 consecutive patients receiving an EETA through a binostril approach was performed. All anatomical endonasal variations were noted and the relevance for the progress of surgery evaluated. RESULTS: In 48% of patients, anatomical variations were recognized, the majority of which were spinae septi and septum deviations. In 5% of patients, the planned binostril approach had to be converted into a mononostril approach; whereas in 18% of patients with an anatomical variation, a correction had to be performed. There was no difference between the ENT surgeon and the neurosurgeon performing the approach. Complications related to the endonasal phase of the surgery occurred in 3.8%. Fluoroscopy or electromagnetic navigation has been used during 6.5% of the surgeries. CONCLUSION: Although endonasal anatomical variations are frequent, they do not pose a relevant obstacle for EETA.1 juni 201

    Brain size and brain/intracranial volume ratio in major mental illness

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>This paper summarizes the findings of a long term study addressing the question of how several brain volume measure are related to three major mental illnesses in a Colorado subject group. It reports results obtained from a large N, collected and analyzed by the same laboratory over a multiyear period, with visually guided MRI segmentation being the primary initial analytic tool.</p> <p>Methods</p> <p>Intracerebral volume (ICV), total brain volume (TBV), ventricular volume (VV), ventricular/brain ratio (VBR), and TBV/ICV ratios were calculated from a total of 224 subject MRIs collected over a period of 13 years. Subject groups included controls (C, N = 89), and patients with schizophrenia (SZ, N = 58), bipolar disorder (BD, N = 51), and schizoaffective disorder (SAD, N = 26).</p> <p>Results</p> <p>ICV, TBV, and VV measures compared favorably with values obtained by other research groups, but in this study did not differ significantly between groups. TBV/ICV ratios were significantly decreased, and VBR increased, in the SZ and BD groups compared to the C group. The SAD group did not differ from C on any measure.</p> <p>Conclusions</p> <p>In this study TBV/ICV and VBR ratios separated SZ and BD patients from controls. Of interest however, SAD patients did not differ from controls on these measures. The findings suggest that the gross measure of TBV may not reliably differ in the major mental illnesses to a degree useful in diagnosis, likely due to the intrinsic variability of the measures in question; the differences in VBR appear more robust across studies. Differences in some of these findings compared to earlier reports from several laboratories finding significant differences between groups in VV and TBV may relate to phenomenological drift, differences in analytic techniques, and possibly the "file drawer problem".</p

    Molecular and cellular mechanisms underlying the evolution of form and function in the amniote jaw.

    Get PDF
    The amniote jaw complex is a remarkable amalgamation of derivatives from distinct embryonic cell lineages. During development, the cells in these lineages experience concerted movements, migrations, and signaling interactions that take them from their initial origins to their final destinations and imbue their derivatives with aspects of form including their axial orientation, anatomical identity, size, and shape. Perturbations along the way can produce defects and disease, but also generate the variation necessary for jaw evolution and adaptation. We focus on molecular and cellular mechanisms that regulate form in the amniote jaw complex, and that enable structural and functional integration. Special emphasis is placed on the role of cranial neural crest mesenchyme (NCM) during the species-specific patterning of bone, cartilage, tendon, muscle, and other jaw tissues. We also address the effects of biomechanical forces during jaw development and discuss ways in which certain molecular and cellular responses add adaptive and evolutionary plasticity to jaw morphology. Overall, we highlight how variation in molecular and cellular programs can promote the phenomenal diversity and functional morphology achieved during amniote jaw evolution or lead to the range of jaw defects and disease that affect the human condition

    Hepatopulmonary syndrome in patients with chronic liver disease: role of pulse oximetry

    Get PDF
    BACKGROUND: Hepatopulmonary syndrome (HPS) is a rare complication of liver diseases of different etiologies and may indicate a poor prognosis. Therefore, a simple non-invasive screening method to detect HPS would be highly desirable. In this study pulse oximetry was evaluated to identify patients with HPS. METHODS: In 316 consecutive patients with liver cirrhosis (n = 245), chronic hepatitis (n = 69) or non-cirrhotic portal hypertension (n = 2) arterial oxygen saturation (SaO(2)) was determined using a pulse oximeter. In patients with SaO(2 )≤92% in supine position and/or a decrease of ≥4% after change from supine to upright position further diagnostic procedures were performed, including contrast-enhanced echocardiography and perfusion lung scan. RESULTS: Seventeen patients (5.4%) had a pathological SaO(2). Four patients (1.3%) had HPS. HPS patients had a significant lower mean SaO(2 )in supine (89.7%, SD 5.4 vs. 96.0%, SD 2.3; p = 0.003) and upright position (84.3%, SD 5.0 vs. 96.0%, SD 2.4; p = 0.001) and had a lower mean PaO(2 )(56.2 mm Hg, SD 15.2 vs. 71.2 mm Hg, SD 20.2; p = 0.02) as compared to patients without HPS. The mean ΔSaO(2 )(difference between supine and upright position) was 5.50 (SD 7) in HPS patients compared to non-HPS patients who showed no change (p = 0.001). There was a strong correlation between shunt volume and the SaO(2 )values (R = -0.94). CONCLUSION: Arterial SaO(2 )determination in supine and upright position is a useful non-invasive screening test for HPS and correlates well with the intrapulmonary shunt volume

    Impact of cognitive stimulation on ripples within human epileptic and non-epileptic hippocampus

    Get PDF
    Background: Until now there has been no way of distinguishing between physiological and epileptic hippocampal ripples in intracranial recordings. In the present study we addressed this by investigating the effect of cognitive stimulation on interictal high frequency oscillations in the ripple range (80-250 Hz) within epileptic (EH) and non-epileptic hippocampus (NH). Methods: We analyzed depth EEG recordings in 10 patients with intractable epilepsy, in whom hippocampal activity was recorded initially during quiet wakefulness and subsequently during a simple cognitive task. Using automated detection of ripples based on amplitude of the power envelope, we analyzed ripple rate (RR) in the cognitive and resting period, within EH and NH. Results: Compared to quiet wakefulness we observed a significant reduction of RR during cognitive stimulation in EH, while it remained statistically marginal in NH. Further, we investigated the direct impact of cognitive stimuli on ripples (i.e. immediately post-stimulus), which showed a transient statistically significant suppression of ripples in the first second after stimuli onset in NH only. Conclusion: Our results point to a differential reactivity of ripples within EH and NH to cognitive stimulation

    The Structure of the Chemokine Receptor CXCR1 in Phospholipid Bilayers and Interactions with IL-8

    Get PDF
    CXCR1 is one of two high-affinity receptors for the CXC chemokine interleukin-8 (IL-8), a major mediator of immune and inflammatory responses implicated in many disorders, including tumor growth(1-3). IL-8, released in response to inflammatory stimuli, binds to the extracellular side of CXCR1. The ligand-activated intracellular signaling pathways result in neutrophil migration to the site of inflammation(2). CXCR1 is a class-A, rhodopsin-like G-protein-coupled receptor (GPCR), the largest class of integral membrane proteins responsible for cellular signal transduction and targeted as drug receptors(4-7). Despite its importance, its molecular mechanism is poorly understood due to the limited structural information available. Recently, structure determination of GPCRs has advanced by tailoring the receptors with stabilizing mutations, insertion of the protein T4 lysozyme and truncations of their amino acid sequences(8), as well as addition of stabilizing antibodies and small molecules(9) that facilitate crystallization in cubic phase monoolein mixtures(10). The intracellular loops of GPCRs are critical for G-protein interactions(11) and activation of CXCR1 involves both N-terminal residues and extracellular loops(2,12,13). Our previous NMR studies indicate that IL-8 binding to the N-terminal residues is mediated by the membrane, underscoring the importance of the phospholipid bilayer for physiological activity(14). Here we report the three-dimensional structure of human CXCR1 determined by NMR spectroscopy. The receptor is in liquid crystalline phospholipid bilayers, without modification of its amino acid sequence and under physiological conditions. Features important for intracellular G-protein activation and signal transduction are revealed

    Emergence of 3D Printed Dosage Forms: Opportunities and Challenges

    Get PDF
    The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such as extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored. This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, including design flexibility and control and manufacture which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry
    • …
    corecore