1,011 research outputs found
Quality interoperability within digital libraries: the DL.org perspective
Quality is the most dynamic aspect of DLs, and becomes even more complex with respect to interoperability. This paper formalizes the research motivations and hypotheses on quality interoperability conducted by the Quality Working Group within the EU-funded project DL.org (<a href="http://www.dlorg.eu">http://www.dlorg.eu/</a>). After providing a multi-level interoperability framework – adopted by DL.org - the authors illustrate key-research points and
approaches on the way to the interoperability of DLs quality, grounding them in the DELOS Reference Model. By applying the DELOS Reference Model Quality Concept Map to their interoperability motivating scenario, the authors subsequently present the two main research outcomes of their investigation - the Quality Core Model and the Quality Interoperability Survey
Rate-dependent morphology of Li2O2 growth in Li-O2 batteries
Compact solid discharge products enable energy storage devices with high
gravimetric and volumetric energy densities, but solid deposits on active
surfaces can disturb charge transport and induce mechanical stress. In this
Letter we develop a nanoscale continuum model for the growth of Li2O2 crystals
in lithium-oxygen batteries with organic electrolytes, based on a theory of
electrochemical non-equilibrium thermodynamics originally applied to Li-ion
batteries. As in the case of lithium insertion in phase-separating LiFePO4
nanoparticles, the theory predicts a transition from complex to uniform
morphologies of Li2O2 with increasing current. Discrete particle growth at low
discharge rates becomes suppressed at high rates, resulting in a film of
electronically insulating Li2O2 that limits cell performance. We predict that
the transition between these surface growth modes occurs at current densities
close to the exchange current density of the cathode reaction, consistent with
experimental observations.Comment: 8 pages, 6 fig
Combining two-photon-polymerization with UV-lithography for laser particle acceleration targets
In the field of laser driven particle acceleration, many experiments with plain foil targets have been performed to investigate ion acceleration mechanisms such as TNSA and BOA. A more complex target geometry, for which the front and rear surface can be structured in a deterministic way, will lead to a better understanding of e.g. the actual source size, laser contrast related effect to the coupling efficiency of laser energy into the target of specifically shaped target surfaces or means to reduce the particle beam divergence such as ballistic focusing. A promising technology to manufacture complex 3D freeform targets is the two-photon-polymerization. With resolutions better than 200 nm, it is possible to create small targets with microstructured surfaces. We implemented the combination of two-photon-polymerization and UV-lithography to facilitate the handling of such small structures
On an exponential attractor for a class of PDEs with degenerate diffusion and chemotaxis
In this article we deal with a class of strongly coupled parabolic systems
that encompasses two different effects: degenerate diffusion and chemotaxis.
Such classes of equations arise in the mesoscale level modeling of biomass
spreading mechanisms via chemotaxis. We show the existence of an exponential
attractor and, hence, of a finite-dimensional global attractor under certain
'balance conditions' on the order of the degeneracy and the growth of the
chemotactic function
Poor accuracy of freehand cup positioning during total hip arthroplasty
Several studies have demonstrated a correlation between the acetabular cup position and the risk of dislocation, wear and range of motion after total hip arthroplasty. The present study was designed to evaluate the accuracy of the surgeon’s estimated position of the cup after freehand placement in total hip replacement. Peroperative estimated abduction and anteversion of 200 acetabular components (placed by three orthopaedic surgeons and nine residents) were compared with measured outcomes (according to Pradhan) on postoperative radiographs. Cups were placed in 49.7° (SD 6.7) of abduction and 16.0° (SD 8.1) of anteversion. Estimation of placement was 46.3° (SD 4.3) of abduction and 14.6° (SD 5.9) of anteversion. Of more interest is the fact that for the orthopaedic surgeons the mean inaccuracy of estimation was 4.1° (SD 3.9) for abduction and 5.2° (SD 4.5) for anteversion and for their residents this was respectively, 6.3° (SD 4.6) and 5.7° (SD 5.0). Significant differences were found between orthopaedic surgeons and residents for inaccuracy of estimation for abduction, not for anteversion. Body mass index, sex, (un)cemented fixation and surgical approach (anterolateral or posterolateral) were not significant factors. Based upon the inaccuracy of estimation, the group’s chance on future cup placement within Lewinnek’s safe zone (5–25° anteversion and 30–50° abduction) is 82.7 and 85.2% for anteversion and abduction separately. When both parameters are combined, the chance of accurate placement is only 70.5%. The chance of placement of the acetabular component within 5° of an intended position, for both abduction and anteversion is 21.5% this percentage decreases to just 2.9% when the tolerated error is 1°. There is a tendency to underestimate both abduction and anteversion. Orthopaedic surgeons are superior to their residents in estimating abduction of the acetabular component. The results of this study indicate that freehand placement of the acetabular component is not a reliable method
Recommended from our members
Overview of mathematical approaches used to model bacterial chemotaxis II: bacterial populations
We review the application of mathematical modeling to understanding the behavior of populations of chemotactic bacteria. The application of continuum mathematical models, in particular generalized Keller–Segel models, is discussed along with attempts to incorporate the microscale (individual) behavior on the macroscale, modeling the interaction between different species of bacteria, the interaction of bacteria with their environment, and methods used to obtain experimentally verified parameter values. We allude briefly to the role of modeling pattern formation in understanding collective behavior within bacterial populations. Various aspects of each model are discussed and areas for possible future research are postulated
Environmental regulation induced foreign direct investment
The last decade has witnessed a renewed interest in the relationship between environmental regulations and international capital flows. However, empirical studies have so far failed to find conclusive evidence for this so-called pollution haven or race to the bottom effect where foreign direct investment (FDI) is assumed to be attracted to low regulation countries, regions or states. In this paper we present a simple theoretical framework to demonstrate that greater stringency in environmental standards can lead to a strategic increase in capital inflows which we refer to as environmental regulation induced FDI. Our result reveals a possible explanation for the mixed results in the empirical literature and provides an illustration of the conditions under which environmental regulations in the host country can affect the location decision of foreign firms
Mathematical description of bacterial traveling pulses
The Keller-Segel system has been widely proposed as a model for bacterial
waves driven by chemotactic processes. Current experiments on {\em E. coli}
have shown precise structure of traveling pulses. We present here an
alternative mathematical description of traveling pulses at a macroscopic
scale. This modeling task is complemented with numerical simulations in
accordance with the experimental observations. Our model is derived from an
accurate kinetic description of the mesoscopic run-and-tumble process performed
by bacteria. This model can account for recent experimental observations with
{\em E. coli}. Qualitative agreements include the asymmetry of the pulse and
transition in the collective behaviour (clustered motion versus dispersion). In
addition we can capture quantitatively the main characteristics of the pulse
such as the speed and the relative size of tails. This work opens several
experimental and theoretical perspectives. Coefficients at the macroscopic
level are derived from considerations at the cellular scale. For instance the
stiffness of the signal integration process turns out to have a strong effect
on collective motion. Furthermore the bottom-up scaling allows to perform
preliminary mathematical analysis and write efficient numerical schemes. This
model is intended as a predictive tool for the investigation of bacterial
collective motion
Measurement of the diffractive structure function in deep inelastic scattering at HERA
This paper presents an analysis of the inclusive properties of diffractive
deep inelastic scattering events produced in interactions at HERA. The
events are characterised by a rapidity gap between the outgoing proton system
and the remaining hadronic system. Inclusive distributions are presented and
compared with Monte Carlo models for diffractive processes. The data are
consistent with models where the pomeron structure function has a hard and a
soft contribution. The diffractive structure function is measured as a function
of \xpom, the momentum fraction lost by the proton, of , the momentum
fraction of the struck quark with respect to \xpom, and of . The \xpom
dependence is consistent with the form \xpoma where
in all bins of and
. In the measured range, the diffractive structure function
approximately scales with at fixed . In an Ingelman-Schlein type
model, where commonly used pomeron flux factor normalisations are assumed, it
is found that the quarks within the pomeron do not saturate the momentum sum
rule.Comment: 36 pages, latex, 11 figures appended as uuencoded fil
Measurement of Jet Shapes in Photoproduction at HERA
The shape of jets produced in quasi-real photon-proton collisions at
centre-of-mass energies in the range GeV has been measured using the
hadronic energy flow. The measurement was done with the ZEUS detector at HERA.
Jets are identified using a cone algorithm in the plane with a
cone radius of one unit. Measured jet shapes both in inclusive jet and dijet
production with transverse energies GeV are presented. The jet
shape broadens as the jet pseudorapidity () increases and narrows
as increases. In dijet photoproduction, the jet shapes have been
measured separately for samples dominated by resolved and by direct processes.
Leading-logarithm parton-shower Monte Carlo calculations of resolved and direct
processes describe well the measured jet shapes except for the inclusive
production of jets with high and low . The observed
broadening of the jet shape as increases is consistent with the
predicted increase in the fraction of final state gluon jets.Comment: 29 pages including 9 figure
- …