BRITE-Constellation: Data processing and photometry

The BRITE mission is a pioneering space project aimed at the long-term photometric monitoring of the brightest stars in the sky by means of a constellation of nano-satellites. Its main advantage is high photometric accuracy and time coverage inaccessible from the ground. The main aim of this paper is the presentation of procedures used to obtain high-precision photometry from a series of images acquired by the BRITE satellites in two modes of observing, stare and chopping. We developed two pipelines corresponding to the two modes of observing. The assessment of the performance of both pipelines is presented. It is based on two comparisons, which use data from six runs of the UniBRITE satellite: (i) comparison of photometry obtained by both pipelines on the same data, which were partly affected by charge transfer inefficiency (CTI), (ii) comparison of real scatter with theoretical expectations. It is shown that for CTI-affected observations, the chopping pipeline provides much better photometry than the other pipeline. For other observations, the results are comparable only for data obtained shortly after switching to chopping mode. Starting from about 2.5 years in orbit, the chopping mode of observing provides significantly better photometry for UniBRITE data than the stare mode. This paper shows that high-precision space photometry with low-cost nano-satellites is achievable. The proposed meth- ods, used to obtain photometry from images affected by high impulsive noise, can be applied to data from other space missions or even to data acquired from ground-based observations

Amyloid fibril length distribution quantified by atomic force microscopy single-particle image analysis

Amyloid fibrils are proteinaceous nano-scale linear aggregates. They are of key interest not only because of their association with numerous disorders, such as type II diabetes mellitus, Alzheimer's and Parkinson's diseases, but also because of their potential to become engineered high-performance nano-materials. Methods to characterise the length distribution of nano-scale linear aggregates such as amyloid fibrils are of paramount importance both in understanding the biological impact of these aggregates and in controlling their mechanical properties as potential nano-materials. Here, we present a new quantitative approach to the determination of the length distribution of amyloid fibrils using tapping-mode atomic force microscopy. The method described employs single-particle image analysis corrected for the length-dependent bias that is a common problem associated with surface-based imaging techniques. Applying this method, we provide a detailed characterisation of the length distribution of samples containing long-straight fibrils formed in vitro from β2-microglobulin. The results suggest that the Weibull distribution is a suitable model in describing fibril length distributions, and reveal that fibril fragmentation is an important process even under unagitated conditions. These results demonstrate the significance of quantitative length distribution measurements in providing important new information regarding amyloid assembly

Age-Related Effects on the Potency of Human Adipose-Derived Stem Cells: Creation and Evaluation of Superlots and Implications for Musculoskeletal Tissue Engineering Applications

Human adipose-derived stem cells (hASC) are now a prevalent source of adult stem cells for studies in tissue engineering and regenerative medicine. However, researchers utilizing hASC in their investigations often encounter high levels of donor-to-donor variability in hASC differentiation potential. Because of this, conducting studies with this primary cell type can require extensive resources to generate statistically significant data. We present a method to generate pooled donor cell populations, termed “superlots,” containing cell populations derived from four to five age-clustered donors. The goal of generating these superlots was to 1) increase experimental throughput, 2) to utilize assay resources more efficiently, and 3) to begin to establish global hASC differentiation behaviors that may be associated with donor age. With our superlot approach, we have validated that pooled donor cell populations exhibit proliferative activity representing the combined behavior of each individual donor cell line. Further, the superlots also exhibit differentiation levels roughly approximating the average combined differentiation levels of each individual donor cell line. We established that high donor-to-donor variability exists between the pre-, peri-, and postmenopausal age groupings and that proliferation and differentiation characteristics can vary widely, independent of age. Interestingly, we did observe that cell lines derived from postmenopausal donors demonstrated a relatively high proclivity for osteogenic differentiation and a relatively lowered proclivity for adipogenic differentiation as compared with cells derived from pre- and perimenopausal donors. In general, superlots effectively represented the average differentiation behavior of each of their contributing cell populations and could provide a powerful tool for increasing experimental throughput to more efficiently utilize resources when studying hASC differentiation

Hybrid optics for the visible produced by bulk casting of sol-gel glass using diamond-turned molds

Recent combinations of diffractive and refractive functions in the same optical component allow designers additional opportunities to make systems more compact and enhance performance. This paper describes a research program for fabricating hybrid refractive/diffractive components from diamond-turned molds using the bulk casting of sol-gel silica glass. The authors use the complementary dispersive nature of refractive and diffractive optics to render two-color correction in a single hybrid optical element. Since diamond turning has matured as a deterministic manufacturing technology, techniques previously suitable only in the infrared are now being applied to components used at visible wavelengths. Thus, the marriage of diamond turning and sol-gel processes offers a cost-effective method for producing highly customized and specialized optical components in high quality silica glass. With the sol-gel casting method of replication, diamond-turned mold costs can be shared over many pieces. Diamond turning takes advantage of all of the available degrees of freedom in a single hybrid optical element: aspheric surface to eliminate spherical aberration, kinoform surface for control of primary chromatic aberration, and the flexibility to place the kinoform on non-planar surfaces for maximum design flexibility. The authors discuss the critical issues involved in designing the hybrid element, single point diamond-turning the mold, and fabrication in glass using the sol-gel process

TAVR in Older Adults: Moving Toward a Comprehensive Geriatric Assessment and Away From Chronological Age

Calcific aortic stenosis can be considered a model for geriatric cardiovascular conditions due to a confluence of factors. The remarkable technological development of transcatheter aortic valve replacement was studied initially on older adult populations with prohibitive or high-risk for surgical valve replacement. Through these trials, the cardiovascular community has recognized that stratification of these chronologically older adults can be improved incrementally by invoking the concept of frailty and other geriatric risks. Given the complexity of the aging process, stratification by chronological age should only be the initial step but is no longer sufficient to optimally quantify cardiovascular and noncardiovascular risk. In this review, we employ a geriatric cardiology lens to focus on the diagnosis and the comprehensive management of aortic stenosis in older adults to enhance shared decision-making with patients and their families and optimize patient-centered outcomes. Finally, we highlight knowledge gaps that are critical for future areas of study

Spermine oxidase (SMO) activity in breast tumor tissues and biochemical analysis of the anticancer spermine analogues BENSpm and CPENSpm

Background: Polyamine metabolism has a critical role in cell death and proliferation representing a potential target for intervention in breast cancer (BC). This study investigates the expression of spermine oxidase (SMO) and its prognostic significance in BC. Biochemical analysis of Spm analogues BENSpm and CPENSpm, utilized in anticancer therapy, was also carried out to test their property in silico and in vitro on the recombinant SMO enzyme. Methods: BC tissue samples were analyzed for SMO transcript level and SMO activity. Student’s t test was applied to evaluate the significance of the differences in value observed in T and NT samples. The structure modeling analysis of BENSpm and CPENSpm complexes formed with the SMO enzyme and their inhibitory activity, assayed by in vitro experiments, were examined. Results: Both the expression level of SMO mRNA and SMO enzyme activity were significantly lower in BC samples compared to NT samples. The modeling of BENSpm and CPENSpm complexes formed with SMO and their inhibition properties showed that both were good inhibitors. Conclusions: This study shows that underexpression of SMO is a negative marker in BC. The SMO induction is a remarkable chemotherapeutical target. The BENSpm and CPENSpm are efficient SMO inhibitors. The inhibition properties shown by these analogues could explain their poor positive outcomes in Phases I and II of clinical trials

Overcoming the blood–brain barrier: the role of nanomaterials in treating neurological diseases

Therapies directed toward the central nervous system remain difficult to translate into improved clinical outcomes. This is largely due to the blood–brain barrier (BBB), arguably the most tightly regulated interface in the human body, which routinely excludes most therapeutics. Advances in the engineering of nanomaterials and their application in biomedicine (i.e., nanomedicine) are enabling new strategies that have the potential to help improve our understanding and treatment of neurological diseases. Herein, the various mechanisms by which therapeutics can be delivered to the brain are examined and key challenges facing translation of this research from benchtop to bedside are highlighted. Following a contextual overview of the BBB anatomy and physiology in both healthy and diseased states, relevant therapeutic strategies for bypassing and crossing the BBB are discussed. The focus here is especially on nanomaterial‐based drug delivery systems and the potential of these to overcome the biological challenges imposed by the BBB. Finally, disease‐targeting strategies and clearance mechanisms are explored. The objective is to provide the diverse range of researchers active in the field (e.g., material scientists, chemists, engineers, neuroscientists, and clinicians) with an easily accessible guide to the key opportunities and challenges currently facing the nanomaterial‐mediated treatment of neurological diseases

Relationship Between Anti-DFS70 Autoantibodies and Oxidative Stress

Background: The anti-DFS70 autoantibodies are one of the most commonly and widely described agent of unknown clinical significance, frequently detected in healthy individuals. It is not known whether the DFS70 autoantibodies are protective or pathogenic. One of the factors suspected of inducing the formation of anti-DFS70 antibodies is increased oxidative stress. We evaluated the coexistence of anti-DFS70 antibodies with selected markers of oxidative stress and investigated whether these antibodies could be considered as indirect markers of oxidative stress. Methods: The intensity of oxidative stress was measured in all samples via indices of free-radical damage to lipids and proteins such as total oxidant status (TOS), concentrations of lipid hydroperoxides (LPH), lipofuscin (LPS), and malondialdehyde (MDA). The parameters of the non-enzymatic antioxidant system, such as total antioxidant status (TAS) and uric acid concentration (UA), were also measured, as well as the activity of superoxide dismutase (SOD). Based on TOS and TAS values, the oxidative stress index (OSI) was calculated. All samples were also tested with indirect immunofluorescence assay (IFA) and 357 samples were selected for direct monospecific anti DFS70 enzyme-linked immunosorbent assay (ELISA) testing. Results: The anti-DFS70 antibodies were confirmed by ELISA test in 21.29% of samples. Compared with anti-DFS70 negative samples we observed 23% lower concentration of LPH (P =.038) and 11% lower concentration of UA (P =.005). TOS was 20% lower (P =.014). The activity of SOD was up to 5% higher (P =.037). The Pearson correlation showed weak negative correlation for LPH, UA, and TOS and a weak positive correlation for SOD activity. Conclusion: In samples positive for the anti-DFS70 antibody a decreased level of oxidative stress was observed, especially in the case of samples with a high antibody titer. Anti-DFS70 antibodies can be considered as an indirect marker of reduced oxidative stress or a marker indicating the recent intensification of antioxidant processes