Dynamic Pattern Formation in a Vesicle-Generating Microfluidic Device

Spatiotemporal pattern formation occurs in a variety of nonequilibrium physical and chemical systems. Here we show that a microfluidic device designed to produce reverse micelles can generate complex, ordered patterns as it is continuously operated far from thermodynamic equilibrium. Flow in a microfluidic system is usually simple—viscous effects dominate and the low Reynolds number leads to laminar flow. Self-assembly of the vesicles into patterns depends on channel geometry and relative fluid pressures, enabling the production of motifs ranging from monodisperse droplets to helices and ribbons

High-sensitivity microfluidic calorimeters for biological and chemical applications

High-sensitivity microfluidic calorimeters raise the prospect of achieving high-throughput biochemical measurements with minimal sample consumption. However, it has been challenging to realize microchip-based calorimeters possessing both high sensitivity and precise sample-manipulation capabilities. Here, we report chip-based microfluidic calorimeters capable of characterizing the heat of reaction of 3.5-nL samples with 4.2-nW resolution. Our approach, based on a combination of hard- and soft-polymer microfluidics, provides both exceptional thermal response and the physical strength necessary to construct high-sensitivity calorimeters that can be scaled to automated, highly multiplexed array architectures. Polydimethylsiloxane microfluidic valves and pumps are interfaced to parylene channels and reaction chambers to automate the injection of analyte at 1 nL and below. We attained excellent thermal resolution via on-chip vacuum encapsulation, which provides unprecedented thermal isolation of the minute microfluidic reaction chambers. We demonstrate performance of these calorimeters by resolving measurements of the heat of reaction of urea hydrolysis and the enthalpy of mixing of water with methanol. The device structure can be adapted easily to enable a wide variety of other standard calorimeter operations; one example, a flow calorimeter, is described

Dyeability of corona-treated fabrics

In this study, corona technology is applied in the wet processing of cotton fabrics. The properties of cotton, such as hydrophilicity, ionisation and mechanical properties, are evaluated and compared with previous results of cuticle oxidation and morphological changes. The results of dyeings of coronatreated materials under different conditions are compared with those of raw, bleached and desized cotton. The dyeings are carried out with three different commercial direct dyes. The classical method for the processing of cotton materials and the corona discharge method are discussed and compared in order to analyse the advantages of this innovative process

The sex-specific effects of diet quality versus quantity on morphology in Drosophila melanogaster

This deposit is composed by the main article plus the supplementary materials of the publication.Variation in the quality and quantity of nutrition is a major contributor to phenotypic variation in animal populations. Although we know much of how dietary restriction impacts phenotype, and of the molecular-genetic and physiological mechanisms that underlie this response, we know much less of the effects of dietary imbalance. Specifically, although dietary imbalance and restriction both reduce overall body size, it is unclear whether both have the same effect on the size of individual traits. Here, we use the fruit fly Drosophila melanogaster to explore the effect of dietary food versus protein-to-carbohydrate ratio on body proportion and trait size. Our results indicate that body proportion and trait size respond differently to changes in diet quantity (food concentration) versus diet quality (protein-to-carbohydrate ratio), and that these effects are sex specific. While these differences suggest that Drosophila use at least partially distinct developmental mechanisms to respond to diet quality versus quantity, further analysis indicates that the responses can be largely explained by the independent and contrasting effects of protein and carbohydrate concentration on trait size. Our data highlight the importance of considering macronutrient composition when elucidating the effect of nutrition on trait size, at the levels of both morphology and developmental physiology.National Science Foundation grants: (IOS-1557638, IOS-0919855); Lake Forest College.info:eu-repo/semantics/publishedVersio

Wave activity (planetary, tidal) throughout the middle atmosphere (20-100km) over the CUJO network: Satellite (TOMS) and Medium Frequency (MF) radar observations

Planetary and tidal wave activity in the tropopause-lower stratosphere and mesosphere-lower thermosphere (MLT) is studied using combinations of ground-based (GB) and satellite instruments (2000-2002). The relatively new MFR (medium frequency radar) at Platteville (40° N, 105° W) has provided the opportunity to create an operational network of middle-latitude MFRs, stretching from 81° W-142° E, which provides winds and tides 70-100km. CUJO (Canada U.S. Japan Opportunity) comprises systems at London (43° N, 81° W), Platteville (40° N, 105° W), Saskatoon (52° N, 107° W), Wakkanai (45° N, 142° E) and Yamagawa (31° N, 131° E). It offers a significant 7000-km longitudinal sector in the North American-Pacific region, and a useful range of latitudes (12-14°) at two longitudes. Satellite data mainly involve the daily values of the total ozone column measured by the Earth Probe (EP) TOMS (Total Ozone Mapping Spectrometer) and provide a measure of tropopause-lower stratospheric planetary wave activity, as well as ozone variability. <P style="line-height: 20px;"> Climatologies of ozone and winds/tides involving frequency versus time (wavelet) contour plots for periods from 2-d to 30-d and the interval from mid 2000 to 2002, show that the changes with altitude, longitude and latitude are very significant and distinctive. Geometric-mean wavelets for the region of the 40° N MFRs demonstrate occasions during the autumn, winter and spring months when there are similarities in the spectral features of the lower atmosphere and at mesopause (85km) heights. Both direct planetary wave (PW) propagation into the MLT, nonlinear PW-tide interactions, and disturbances in MLT tides associated with fluctuations in the ozone forcing are considered to be possible coupling processes. The complex horizontal wave numbers of the longer period oscillations are provided in frequency contour plots for the TOMS satellite data to demonstrate the differences between lower atmospheric and MLT wave motions and their directions of propagation

Altitude, latitude and climate zone as determinants of mountain hare (Lepus timidus) coat colour change

Local adaptation to annually changing environments has evolved in numerous species. Seasonal coat colour change is an adaptation that has evolved in multiple mammal and bird species occupying areas that experience seasonal snow cover. It has a critical impact on fitness as predation risk may increase when an individual is mismatched against its habitat's background colour. In this paper, we investigate the correlation between landscape covariates and moult timing in a native winter-adapted herbivore, the mountain hare (Lepus timidus), throughout Norway. Data was collected between 2011 and 2019 at 678 camera trap locations deployed across an environmental gradient. Based on this data, we created a Bayesian multinomial logistic regression model that quantified the correlations between landscape covariates and coat colour phenology and analysed among season and year moult timing variation. Our results demonstrate that mountain hare moult timing is strongly correlated with altitude and latitude with hares that live at higher latitudes and altitudes keeping their winter white coats for longer than their conspecifics that inhabit lower latitudes and altitudes. Moult timing was also weakly correlated with climate zone with hares that live in coastal climates keeping their winter white coats for longer than hares that live in continental climates. We found evidence of some among year moult timing variation in spring, but not in autumn. We conclude that mountain hare moult timing has adapted to local environmental conditions throughout Norway

Genetic basis of arsenite and cadmium tolerance in Saccharomyces cerevisiae

<p>Abstract</p> <p>Background</p> <p>Arsenic and cadmium are widely distributed in nature and pose serious threats to the environment and human health. Exposure to these nonessential toxic metals may result in a variety of human diseases including cancer. However, arsenic and cadmium toxicity targets and the cellular systems contributing to tolerance acquisition are not fully known.</p> <p>Results</p> <p>To gain insight into metal action and cellular tolerance mechanisms, we carried out genome-wide screening of the <it>Saccharomyces cerevisiae </it>haploid and homozygous diploid deletion mutant collections and scored for reduced growth in the presence of arsenite or cadmium. Processes found to be required for tolerance to both metals included sulphur and glutathione biosynthesis, environmental sensing, mRNA synthesis and transcription, and vacuolar/endosomal transport and sorting. We also identified metal-specific defence processes. Arsenite-specific defence functions were related to cell cycle regulation, lipid and fatty acid metabolism, mitochondrial biogenesis, and the cytoskeleton whereas cadmium-specific defence functions were mainly related to sugar/carbohydrate metabolism, and metal-ion homeostasis and transport. Molecular evidence indicated that the cytoskeleton is targeted by arsenite and that phosphorylation of the Snf1p kinase is required for cadmium tolerance.</p> <p>Conclusion</p> <p>This study has pin-pointed core functions that protect cells from arsenite and cadmium toxicity. It also emphasizes the existence of both common and specific defence systems. Since many of the yeast genes that confer tolerance to these agents have homologues in humans, similar biological processes may act in yeast and humans to prevent metal toxicity and carcinogenesis.</p