Modeling canopy-induced turbulence in the Earth system: a unified parameterization of turbulent exchange within plant canopies and the roughness sublayer (CLM-ml v0)

Land surface models used in climate models neglect the roughness sublayer and parameterize within-canopy turbulence in an ad hoc manner. We implemented a roughness sublayer turbulence parameterization in a multilayer canopy model (CLM-ml v0) to test if this theory provides a tractable parameterization extending from the ground through the canopy and the roughness sublayer. We compared the canopy model with the Community Land Model (CLM4.5) at seven forest, two grassland, and three cropland AmeriFlux sites over a range of canopy heights, leaf area indexes, and climates. CLM4.5 has pronounced biases during summer months at forest sites in midday latent heat flux, sensible heat flux, gross primary production, nighttime friction velocity, and the radiative temperature diurnal range. The new canopy model reduces these biases by introducing new physics. Advances in modeling stomatal conductance and canopy physiology beyond what is in CLM4.5 substantially improve model performance at the forest sites. The signature of the roughness sublayer is most evident in nighttime friction velocity and the diurnal cycle of radiative temperature, but is also seen in sensible heat flux. Within-canopy temperature profiles are markedly different compared with profiles obtained using Monin–Obukhov similarity theory, and the roughness sublayer produces cooler daytime and warmer nighttime temperatures. The herbaceous sites also show model improvements, but the improvements are related less systematically to the roughness sublayer parameterization in these canopies. The multilayer canopy with the roughness sublayer turbulence improves simulations compared with CLM4.5 while also advancing the theoretical basis for surface flux parameterizations

Pulmonary Dysfunction in Patients with Femoral Shaft Fracture Treated with Intramedullary Nailing

Background: This study was undertaken to determine whether alveolar dead space increases during intramedullary nailing of femoral shaft fractures and whether alveolar dead space predicts postoperative pulmonary dysfunction in patients undergoing intramedullary nailing of a femoral shaft fracture. Methods: All patients with a femoral shaft fracture were prospectively enrolled in the study unless there was evidence of acute myocardial infarction, shock, or heart failure. Arterial blood gases were measured at three consecutive time-periods after induction of general anesthesia: before intramedullary nailing and ten and thirty minutes after intramedullary nailing. The end-tidal carbon-dioxide level, minute ventilation, positive end‐expiratory pressure, and percent of inspired and expired inhalation agent were recorded simultaneously with the blood-gas measurement. Postoperatively, all subjects were monitored for evidence of pulmonary dysfunction, defined as the need for mechanical ventilation or supplemental oxygen (at a fraction of inspired oxygen of >40%) in the presence of clinical signs of a respiratory rate of >20 breaths/min or the use of accessory muscles of respiration. Results: Seventy‐four patients with a total of eighty femoral shaft fractures completed the study. Fifty fractures (62.5%) underwent nailing after reaming, and thirty fractures (37.5%) underwent nailing with minimal or no reaming. The mean alveolar dead-space measurements before canal opening and at ten and thirty minutes after canal opening were 14.5%, 15.8%, and 15.2% in the total series of seventy‐four patients (general linear model, p = 0.2) and 20.5%, 22.7%, and 24.2% in the twenty patients with postoperative pulmonary dysfunction (general linear model, p = 0.05). Of the twenty‐one patients with an alveolar dead-space measurement of >20% thirty minutes after nailing, sixteen had postoperative pulmonary dysfunction. According to univariate and multivariate analysis, the alveolar dead-space measurement was strongly associated with postoperative pulmonary dysfunction. Conclusions: According to our data, intramedullary nailing of femoral shaft fractures did not significantly increase alveolar dead space, and the amount of alveolar dead space can predict which patients will have pulmonary dysfunction postoperatively

Isotopic Tracking of Hanford 300 Area Derived Uranium in the Columbia River

Our objectives in this study are to quantify the discharge rate of uranium (U) to the Columbia River from the Hanford Site's 300 Area, and to follow that U down river to constrain its fate. Uranium from the Hanford Site has variable isotopic composition due to nuclear industrial processes carried out at the site. This characteristic makes it possible to use high-precision isotopic measurements of U in environmental samples to identify even trace levels of contaminant U, determine its sources, and estimate discharge rates. Our data on river water samples indicate that as much as 3.2 kg/day can enter the Columbia River from the 300 Area, which is only a small fraction of the total load of dissolved natural background U carried by the Columbia River. This very low-level of Hanford derived U can be discerned, despite dilution to < 1 percent of natural background U, 350 km downstream from the Hanford Site. These results indicate that isotopic methods can allow the amounts of U from the 300 Area of the Hanford Site entering the Columbia River to be measured accurately to ascertain whether they are an environmental concern, or are insignificant relative to natural uranium background in the Columbia River

External-field-induced tricritical point in a fluctuation-driven nematic-smectic-A transition

We study theoretically the effect of an external field on the nematic-smectic-A (NA) transition close to the tricritical point, where fluctuation effects govern the qualitative behavior of the transition. An external field suppresses nematic director fluctuations, by making them massive. For a fluctuation-driven first-order transition, we show that an external field can drive the transition second-order. In an appropriate liquid crystal system, we predict the required magnetic field to be of order 10 T. The equivalent electric field is of order $1 V/\mu m$.Comment: revtex, 4 pages, 1 figure; revised version, some equations have been modifie

Thermal transistor: Heat flux switching and modulating

Thermal transistor is an efficient heat control device which can act as a heat switch as well as a heat modulator. In this paper, we study systematically one-dimensional and two-dimensional thermal transistors. In particular, we show how to improve significantly the efficiency of the one-dimensional thermal transistor. The study is also extended to the design of two-dimensional thermal transistor by coupling different anharmonic lattices such as the Frenkel-Kontorova and the Fermi-Pasta-Ulam lattices. Analogy between anharmonic lattices and single-walled carbon nanotube is drawn and possible experimental realization with multi-walled nanotube is suggested.Comment: To appear in J. Phys. Soc. Jp

NO PLIF Imaging in the CUBRC 48 Inch Shock Tunnel

Nitric Oxide Planar Laser-Induced Fluorescence (NO PLIF) imaging is demonstrated at a 10 kHz repetition rate in the Calspan-University at Buffalo Research Center s (CUBRC) 48-inch Mach 9 hypervelocity shock tunnel using a pulse burst laser-based high frame rate imaging system. Sequences of up to ten images are obtained internal to a supersonic combustor model, located within the shock tunnel, during a single approx.10-millisecond duration run of the ground test facility. This represents over an order of magnitude improvement in data rate from previous PLIF-based diagnostic approaches. Comparison with a preliminary CFD simulation shows good overall qualitative agreement between the prediction of the mean NO density field and the observed PLIF image intensity, averaged over forty individual images obtained during several facility runs

Efficiency of Energy Conversion in Thermoelectric Nanojunctions

Using first-principles approaches, this study investigated the efficiency of energy conversion in nanojunctions, described by the thermoelectric figure of merit $ZT$. We obtained the qualitative and quantitative descriptions for the dependence of $ZT$ on temperatures and lengths. A characteristic temperature: $T_{0}= \sqrt{\beta/\gamma(l)}$ was observed. When $T\ll T_{0}$, $ZT\propto T^{2}$. When $T\gg T_{0}$, $ZT$ tends to a saturation value. The dependence of $ZT$ on the wire length for the metallic atomic chains is opposite to that for the insulating molecules: for aluminum atomic (conducting) wires, the saturation value of $ZT$ increases as the length increases; while for alkanethiol (insulating) chains, the saturation value of $ZT$ decreases as the length increases. $ZT$ can also be enhanced by choosing low-elasticity bridging materials or creating poor thermal contacts in nanojunctions. The results of this study may be of interest to research attempting to increase the efficiency of energy conversion in nano thermoelectric devices.Comment: 2 figure

Germline mutations in the oncogene EZH2 cause Weaver syndrome and increased human height.

The biological processes controlling human growth are diverse, complex and poorly understood. Genetic factors are important and human height has been shown to be a highly polygenic trait to which common and rare genetic variation contributes. Weaver syndrome is a human overgrowth condition characterised by tall stature, dysmorphic facial features, learning disability and variable additional features. We performed exome sequencing in four individuals with Weaver syndrome, identifying a mutation in the histone methyltransferase, EZH2, in each case. Sequencing of EZH2 in additional individuals with overgrowth identified a further 15 mutations. The EZH2 mutation spectrum in Weaver syndrome shows considerable overlap with the inactivating somatic EZH2 mutations recently reported in myeloid malignancies. Our data establish EZH2 mutations as the cause of Weaver syndrome and provide further links between histone modifications and regulation of human growth