361 research outputs found

    Characterization of polar organosulfates in secondary organic aerosol from the unsaturated aldehydes 2-E-pentenal, 2-E-hexenal, and 3-Z-hexenal

    Get PDF
    We show in the present study that the unsaturated aldehydes 2-E-pentenal, 2-E-hexenal, and 3-Z-hexenal are biogenic volatile organic compound (BVOC) precursors for polar organosulfates with molecular weights (MWs) 230 and 214, which are also present in ambient fine aerosol from a forested site, i.e., K-puszta, Hungary. These results complement those obtained in a previous study showing that the green leaf aldehyde 3-Z-hexenal serves as a precursor for MW 226 organosulfates. Thus, in addition to isoprene, the green leaf volatiles (GLVs) 2-E-hexenal and 3-Z-hexenal, emitted due to plant stress (mechanical wounding or insect attack), and 2-E-pentenal, a photolysis product of 3-Z-hexenal, should be taken into account for secondary organic aerosol and organosulfate formation. Polar organosulfates are of climatic relevance because of their hydrophilic properties and cloud effects. Extensive use was made of organic mass spectrometry (MS) and detailed interpretation of MS data (i.e., ion trap MS and accurate mass measurements) to elucidate the chemical structures of the MW 230, 214 and 170 organosulfates formed from 2-E-pentenal and indirectly from 2-E-hexenal and 3-Z-hexenal. In addition, quantum chemical calculations were performed to explain the different mass spectral behavior of 2,3-dihydroxypentanoic acid sulfate derivatives, where only the isomer with the sulfate group at C-3 results in the loss of SO3. The MW 214 organosulfates formed from 2-E-pentenal are explained by epoxidation of the double bond in the gas phase and sulfation of the epoxy group with sulfuric acid in the particle phase through the same pathway as that proposed for 3-sulfooxy-2-hydroxy-2-methylpropanoic acid from the isoprene-related alpha,beta-unsaturated aldehyde methacrolein in previous work (Lin et al., 2013). The MW 230 organosulfates formed from 2-E-pentenal are tentatively explained by a novel pathway, which bears features of the latter pathway but introduces an additional hydroxyl group at the C-4 position. Evidence is also presented that the MW 214 positional isomer, 2-sulfooxy-3-hydroxypentanoic acid, is unstable and decarboxylates, giving rise to 1-sulfooxy-2-hydroxybutane, a MW 170 organosulfate. Furthermore, evidence is obtained that lactic acid sulfate is generated from 2-E-pentenal. This chemistry could be important on a regional and local scale where GLV emissions such as from grasses and cereal crops are substantial

    Seasonal Variation of Atmospheric Composition of Water-Soluble Inorganic Species at Rural Background Site in Tanzania, East Africa

    Get PDF
    Samples of coarse, fine and PM10 aerosols were collected at a rural Morogoro sites, during the 2005 dry season and 2006 wet season campaigns using a “Gent” PM10 stacked filter unit sampler with sequential Nuclepore polycarbonate filters. A total of 80 aerosol samples were analyzed for water-soluble inorganic ions components using Ion Chromatography. The mean concentration for the anions Cl-, NO3 -, and SO4 2- and the cations Na+, NH4 +, K+, Mg2+, Ca2+, showed seasonal variation in all size fractions with higher levels during the 2005 dry season campaign than the 2006 wet season campaign. The mean concentrations and associated standard deviation of fine, coarse and PM10 mass were, 17±4, 52±27 and 69±29 μg/m3 during the 2005 dry season campaign and 13±5, 34±23 and 47±25 μg/m3 for the 2006 wet season campaign, respectively. Ca2+ was the most important cation and the SO4 2- was the main acidifying anionic component in PM10 while NH4 + was the most abundant cation in the fine fraction and Cl- the main anionic species in the coarse fraction. The ion balance ratios were all larger than 1.0; they range from 1.30 to 1.44 for the fine fraction and from 2.01 to 3.14 for the coarse fraction. The carbonates were not measured by Ion Chromatography therefore; these missing carbonates are thought to be largely responsible for the observed deviation from 1.0. The study suggests that primary sources such as soil dust dispersion and biomass burning made a significant contribution to the atmospheric particulate pollution in Morogoro.Keywords: Ion chromatography; Aerosol Characterization; coarse, fine and PM10 fractions; Meteorolog

    Elemental Composition and Sources of Atmospheric Particulate Matter in Dar es Salaam, Tanzania

    Get PDF
    An intensive aerosol field campaign was carried out from 16 August to 16 September 2005 (dry season) at a kerbside in Dar es Salaam, Tanzania. A Gent PM10 stacked filter unit sampler with coarse and fine Nuclepore polycarbonate filters, providing fine (0.4 μm) and coarse (8 μm) size fractions, was deployed. A total of 64 parallel collections were made. All samples were analysed for the PM mass by weighing. A further analysis was performed for 25 elements by particle-induced x-ray emission spectrometry. The PM10 mass, as derived from the stacked filter unit samples, was, on average, 58 μg/m3. The concentrations of the heavy metals were lower than those for the elements of crustal origin. Nevertheless, some typical anthropogenic metals, such as Zn and Pb, exhibited much higher median PM10 levels, suggesting strong local sources for these elements in Dar es Salaam. The results also showed very strong day/night differences for the crustal elements (Al, Si, Ca, Ti and Fe). Most elements exhibit strong correlations in the coarse size fraction and somewhat weaker ones in the fine size fraction suggesting that they may originate predominantly from the same source. Principal component analysis with VARIMAX rotation was applied to the data set. Five and four components were identified for the fine and coarse fractions and explained 86.5% and 90.8% of the variance in the data set respectively.Keywords: PIXE; Atmospheric Aerosols; Elements; Size Fractions; PCA; Kerbsid

    Migrating medical communications software to a multi-tenant cloud environment

    Get PDF
    The rise of cloud computing has paved the way for many new applications. Many of these new cloud applications are also multi-tenant, ensuring multiple end users can make use of the same application instance. While these technologies make it possible to create many new applications, many legacy applications can also benefit from the added flexibility and cost-savings of cloud computing and multi-tenancy. In this paper, we describe the steps required to migrate a. NET-based medical communications application to the Windows Azure public cloud environment, and the steps required to add multi-tenancy to the application. We then discuss the advantages and disadvantages of our migration approach. We found that the migration to the cloud itself requires only a limited amount of changes to the application, but that this also limited the benefits, as individual instances would only be partially used. Adding multi-tenancy requires more changes, but when this is done, it has the potential to greatly reduce the cost of running the application

    The contributions of snow, fog, and dry deposition to the summer flux of anions and cations at Summit, Greenland

    Get PDF
    Experiments were performed during the period May–July of 1993 at Summit, Greenland. Aerosol mass size distributions as well as daily average concentrations of several anionic and cationic species were measured. Dry deposition velocities for SO42− were estimated using surrogate surfaces (symmetric airfoils) as well as impactor data. Real-time concentrations of particles greater than 0.5 μm and greater than 0.01 μm were measured. Snow and fog samples from nearly all of the events occurring during the field season were collected. Filter sampler results indicate that SO42− is the dominant aerosol anion species, with Na+, NH4+, and Ca2+being the dominant cations. Impactor results indicate that MSA and SO42− have similar mass size distributions. Furthermore, MSA and SO42− have mass in both the accumulation and coarse modes. A limited number of samples for NH4+ indicate that it exists in the accumulation mode. Na, K, Mg, and Ca exist primarily in the coarse mode. Dry deposition velocities estimated from impactor samples and a theory for dry deposition to snow range from 0.017 cm/s +/− 0.011 cm/s for NH4+ to 0.110 cm/s +/− 0.021 cm/s for Ca. SO42− dry deposition velocity estimates using airfoils are in the range 0.023 cm/s to 0.062 cm/s, as much as 60% greater than values calculated using the airborne size distribution data. The rough agreement between the airfoil and impactor-estimated dry deposition velocities suggests that the airfoils may be used to approximate the dry deposition to the snow surface. Laser particle counter (LPC) results show that particles \u3e 0.5 μm in diameter efficiently serve as nuclei to form fog droplets. Condensation nuclei (CN) measurements indicate that particles \u3c 0.5 μm are not as greatly affected by fog. Furthermore, impactor measurements suggest that from 50% to 80% of the aerosol SO42−serves as nuclei for fog droplets. Snow deposition is the dominant mechanism transporting chemicals to the ice sheet. For NO3−, a species that apparently exists primarily in the gas phase as HNO3(g), 93% of the seasonal inventory (mass of a deposited chemical species per unit area during the season) is due to snow deposition, which suggests efficient scavenging of HNO3(g) by snowflakes. The contribution of snow deposition to the seasonal inventories of aerosols ranges from 45% for MSA to 76% for NH4+. The contribution of fog to the seasonal inventories ranges from 13% for Na+ and Ca2+ to 26% and 32% for SO42− and MSA. The dry deposition contribution to the seasonal inventories of the aerosol species is as low as 5% for NH4+ and as high as 23% for MSA. The seasonal inventory estimations do not take into consideration the spatial variability caused by blowing and drifting snow. Overall, results indicate that snow deposition of chemical species is the dominant flux mechanism during the summer at Summit and that all three deposition processes should be considered when estimating atmospheric concentrations based on ice core chemical signals

    Low molecular weight organic acids in aerosol particles from Rondônia, Brazil, during the biomass-burning, transition and wet periods

    No full text
    International audienceParticles from biomass burning and regional haze were sampled in Rondônia, Brazil, during dry, transition and wet periods from September to November 2002, as part of the LBA-SMOCC (Large-Scale Biosphere-Atmosphere Experiment in Amazonia ? Smoke, Aerosols, Clouds, Rainfall, and Climate) field campaign. Water soluble organic and inorganic compounds in bulk (High Volume and Stacked Filter Unit sampler) and size-resolved (Micro Orifice Uniform Deposit Impactor ? MOUDI) smoke samples were determined by ion chromatography. It was found that low molecular weight polar organic acids account for a significant fraction of the water soluble organic carbon (WSOC) in biomass burning aerosols (C2-C6 dicarboxylic acids reached up to 3.7% and one-ring aromatic acids reached up to 2% of fine fraction WSOC during burning period). Short dicarboxylic (C2-C6) acids are dominated by oxalic acid followed by malonic and succinic acids. The largest ionic species is ammonium sulfate (60?70% of ionic mass). It was found that most of the ionic mass is concentrated in submicrometer-sized particles. Based on the size distribution and correlations with K+, a known biomass burning tracer, it is suggested that many of the organic acids are directly emitted by vegetation fires. Concentrations of dicarboxylic acids in the front and back filters of high volume sampler were determined. Based on these measurements, it was concluded that in the neutral or slightly basic smoke particles typical of this region, dicarboxylic acids are mostly confined to the particulate phase. Finally, it is shown that the distribution of water soluble species shifts to larger aerosols sizes as the aerosol population ages and mixes with other aerosol types in the atmosphere

    Functional group analysis by H NMR/chemical derivatization for the characterization of organic aerosol from the SMOCC field campaign

    Get PDF
    Water soluble organic compounds (WSOC) in aerosol samples collected in the Amazon Basin in a period encompassing the middle/late dry season and the beginning of the wet season, were investigated by H NMR spectroscopy. HiVol filter samples (PM2.5 and PM>2.5) and size-segregated samples from multistage impactor were subjected to H NMR characterization. The H NMR methodology, recently developed for the analysis of organic aerosol samples, has been improved by exploiting chemical methylation of carboxylic groups with diazomethane, which allows the direct determination of the carboxylic acid content of WSOC. The content of carboxylic carbons for the different periods and sizes ranged from 12% to 20% of total measured carbon depending on the season and aerosol size, with higher contents for the fine particles in the transition and wet periods with respect to the dry period. A comprehensive picture is presented of WSOC functional groups in aerosol samples representative of the biomass burning period, as well as of transition and semi-clean atmospheric conditions. A difference in composition between fine (PM2.5) and coarse (PM>2.5) size fractions emerged from the NMR data, the former showing higher alkylic content, the latter being largely dominated by R-O-H (or R-O-R') functional groups. Very small particles (<0.14 &mu;m), however, present higher alkyl-chain content and less oxygenated carbons than larger fine particles (0.42&ndash;1.2 &mu;m). More limited variations were found between the average compositions in the different periods of the campaign

    Terpenylic acid and related compounds: precursors for dimers in secondary organic aerosol from the ozonolysis of α- and β-pinene

    Get PDF
    In the present study, we have characterized the structure of a higher-molecular weight (MW) 358 α- and β-pinene dimeric secondary organic aerosol (SOA) product that received ample attention in previous molecular characterization studies and has been elusive. Based on mass spectrometric evidence for deprotonated molecules formed by electrospray ionization in the negative ion mode and chemical considerations, it is suggested that diaterpenylic acid is a key monomeric intermediate for dimers of the ester type. It is proposed that cis-pinic acid is esterified with the hydroxyl-containing diaterpenylic acid, which can be explained through acid-catalyzed hydrolysis of the recently elucidated lactone-containing terpenylic acid and/or diaterpenylic acid acetate, both first-generation oxidation products. To a minor extent, higher-MW 358 and 344 diester products are formed containing other terpenoic acids as monomeric units, i.e., diaterpenylic acid instead of cis-pinic acid, and diaterebic acid instead of diaterpenylic acid. It is shown that the MW 358 diester and related MW 344 compounds, which can be regarded as processed SOA products, also occur in ambient fine (PM2.5) rural aerosol collected at night during the warm period of the 2006 summer field campaign conducted at K-puszta, Hungary, a rural site with coniferous vegetation. This indicates that, under ambient conditions, the higher-MW diesters are formed in the particle phase over a longer time-scale than that required for gas-to-particle partitioning of their monomeric precursors in laboratory α-/β-pinene ozonolysis experiments

    Organosulfate Formation in Biogenic Secondary Organic Aerosol

    Get PDF
    Organosulfates of isoprene, α-pinene, and β-pinene have recently been identified in both laboratory-generated and ambient secondary organic aerosol (SOA). In this study, the mechanism and ubiquity of organosulfate formation in biogenic SOA is investigated by a comprehensive series of laboratory photooxidation (i.e., OH-initiated oxidation) and nighttime oxidation (i.e., NO3-initiated oxidation under dark conditions) experiments using nine monoterpenes (α-pinene, β-pinene, d-limonene, l-limonene, α-terpinene, γ-terpinene, terpinolene, Δ3-carene, and β-phellandrene) and three monoterpenes (α-pinene, d-limonene, and l-limonene), respectively. Organosulfates were characterized using liquid chromatographic techniques coupled to electrospray ionization combined with both linear ion trap and high-resolution time-of-flight mass spectrometry. Organosulfates are formed only when monoterpenes are oxidized in the presence of acidified sulfate seed aerosol, a result consistent with prior work. Archived laboratory-generated isoprene SOA and ambient filter samples collected from the southeastern U.S. were reexamined for organosulfates. By comparing the tandem mass spectrometric and accurate mass measurements collected for both the laboratory-generated and ambient aerosol, previously uncharacterized ambient organic aerosol components are found to be organosulfates of isoprene, α-pinene, β-pinene, and limonene-like monoterpenes (e.g., myrcene), demonstrating the ubiquity of organosulfate formation in ambient SOA. Several of the organosulfates of isoprene and of the monoterpenes characterized in this study are ambient tracer compounds for the occurrence of biogenic SOA formation under acidic conditions. Furthermore, the nighttime oxidation experiments conducted under highly acidic conditions reveal a viable mechanism for the formation of previously identified nitrooxy organosulfates found in ambient nighttime aerosol samples. We estimate that the organosulfate contribution to the total organic mass fraction of ambient aerosol collected from K-puszta, Hungary, a field site with a similar organosulfate composition as that found in the present study for the southeastern U.S., can be as high as 30%
    corecore