Piezoelectric material based technique for concurrent force sensing and energy harvesting for interactive displays

3-dimensional touch sensing and long battery lifetime are two desired attributes in interactive displays. By employing piezoelectric material and rectifier circuitry related technique, force touch induced charges are used for both force strength detection and energy harvesting, achieving 3dimensional touch sensing and extended battery lifetime at the same time for interactive displays

In situ imaging of field emission from individual carbon nanotubes and their structural damage

©2002 American Institute of Physics. The electronic version of this article is the complete one and can be found online at: http://link.aip.org/link/?APPLAB/80/856/1DOI:10.1063/1.1446994Field emission of individual carbon nanotubes was observed by in situ transmission electron microscopy. A fluctuation in emission current was due to a variation in distance between the nanotube tip and the counter electrode owing to a "head-shaking" effect of the nanotube during field emission. Strong field-induced structural damage of a nanotube occurs in two ways: a piece-by-piece and segment-by-segment pilling process of the graphitic layers, and a concentrical layer-by-layer stripping process. The former is believed owing to a strong electrostatic force, and the latter is likely due to heating produced by emission current that flowed through the most outer graphitic layers

Lumped-Parameter Model and Nonlinear DSSI Analysis

A 2-.degrees-of-freedom discrete model with 8 constant lumped parameters is developed to equivalently simulate frequency-dependent dynamic impedances of the elastic halfspace. The equations of motion for the nonlinear dynamic soil-structure interaction (DSSI) analysis are established in the time domain and then nonlinear seismic responses of the coupling system are predicted by the proposed iterative procedure. Based on numerical results for three typical shear-type structures, effects of the shear stiffness of underlying soils and different ground motions on dynamic responses are examined

Longitudinal Study of the Emerging Functional Connectivity Asymmetry of Primary Language Regions during Infancy

Asymmetry in the form of left-hemisphere lateralization is a striking characteristic of the cerebral regions involved in the adult language network. In this study, we leverage a large sample of typically developing human infants with longitudinal resting-state functional magnetic resonance imaging scans to delineate the trajectory of interhemispheric functional asymmetry in language-related regions during the first 2 years of life. We derived the trajectory of interhemispheric functional symmetry of the inferior frontal gyrus (IFG) and superior temporal gyrus (STG), the sensory and visual cortices, and two higher-order regions within the intraparietal sulcus and dorsolateral prefrontal cortex. Longitudinal models revealed a best fit with quadratic age terms and showed significant estimated coefficients of determination for both the IFG (r2 = 0.261, p < 0.001) and the STG (r2 = 0.142, p < 0.001) regions while all other regions were best modeled by log-linear increases. These inverse-U-shaped functions of the language regions peaked at ∼11.5 months of age, indicating that a transition toward asymmetry began in the second year. This shift was accompanied by an increase in the functional connectivity of these regions within the left hemisphere. Finally, we detected an association between the trajectory of the IFG and language outcomes at 4 years of age (χ2 = 10.986, p = 0.011). Our results capture the developmental timeline of the transition toward interhemispheric functional asymmetry during the first 2 years of life. More generally, our findings suggest that increasing interhemispheric functional symmetry in the first year might be a general principle of the developing brain, governing different functional systems, including those that will eventually become lateralized in adulthood

The influence of baryons on the mass distribution of dark matter halos

Using a set of high-resolution N-body/SPH cosmological simulations with identical initial conditions but run with different numerical setups, we investigate the influence of baryonic matter on the mass distribution of dark halos when radiative cooling is NOT included. We compare the concentration parameters of about 400 massive halos with virial mass from $10^{13}$ \Msun to $7.1 \times 10^{14}$ \Msun. We find that the concentration parameters for the total mass and dark matter distributions in non radiative simulations are on average larger by ~3% and 10% than those in a pure dark matter simulation. Our results indicate that the total mass density profile is little affected by a hot gas component in the simulations. After carefully excluding the effects of resolutions and spurious two-body heating between dark matter and gas particles, we conclude that the increase of the dark matter concentration parameters is due to interactions between baryons and dark matter. We demonstrate this with the aid of idealized simulations of two-body mergers. The results of individual halos simulated with different mass resolutions show that the gas profiles of densities, temperature and entropy are subjects of mass resolution of SPH particles. In particular, we find that in the inner parts of halos, as the SPH resolution increases the gas density becomes higher but both the entropy and temperature decrease.Comment: 8 pages, 6 figures, 1 table, ApJ in press (v652n1); updated to match with the being published versio

A Mechanochemical Model of Cell Reorientation on Substrates under Cyclic Stretch

published_or_final_versio

Effect of hydrofracking fluid on colloid transport in the unsaturated zone

Hydraulic fracturing is expanding rapidly in the US to meet increasing energy demand and requires high volumes of hydrofracking fluid to displace natural gas from shale. Accidental spills and deliberate land application of hydrofracking fluids, which return to the surface during hydrofracking, are common causes of environmental contamination. Since the chemistry of hydrofracking fluids favors transport of colloids and mineral particles through rock cracks, it may also facilitate transport of in situ colloids and associated pollutants in unsaturated soils. We investigated this by subsequently injecting deionized water and flowback fluid at increasing flow rates into unsaturated sand columns containing colloids. Colloid retention and mobilization was measured in the column effluent and visualized in situ with bright field microscopy. While &lt;5% of initial colloids were released by flushing with deionized water, 32–36% were released by flushing with flowback fluid in two distinct breakthrough peaks. These peaks resulted from 1) surface tension reduction and steric repulsion and 2) slow kinetic disaggregation of colloid flocs. Increasing the flow rate of the flowback fluid mobilized an additional 36% of colloids, due to the expansion of water filled pore space. This study suggests that hydrofracking fluid may also indirectly contaminate groundwater by remobilizing existing colloidal pollutants

Promising thermoelectric performance in van der Waals layered SnSe2

SnSe as a lead-free IV–VI semiconductor, has attracted intensive attention for its potential thermoelectric applications, since it is less toxic and much cheaper than conventional PbTe and PbSe thermoelectrics. Here we focus on its sister layered compound SnSe2 in n-type showing a thermoelectric performance to be similarly promising as SnSe in the polycrystalline form. This is enabled by its favorable electronic structure according to first principle calculations, its capability to be effectively doped by bromine on selenium site to optimize the carrier concentration, as well as its intrinsic lattice thermal conductivity as low as 0.4 W/m-K due to the weak van der Waals force between layers. The broad carrier concentration ranging from 0.5 to 6 × 1019 cm−3 realized in this work, further leads to a fundamental understanding on the material parameters determining the thermoelectric transport properties, based on a single parabolic band (SPB) model with acoustic scattering. The layered crystal structure leads to a texture in hot-pressed polycrystalline materials and therefore anisotropic transport properties, which can be well understood by the SPB model. This work not only demonstrates SnSe2 as a promising thermoelectric material but also guides the further improvements particularly by band engineering and texturing approaches

Effects of mowing utilization on forage yield and quality in five oat varieties in alpine area of the eastern Qinghai-Tibetan Plateau

Oat (Avena sativa) is grown to provide feed in winter for livestock production in the alpine area of Qinghai-Tibetan Plateau. The effect of early cutting (T1), late cutting (T2) as well as once cutting andtwice cutting (T3) on forage yields and qualities were investigated for five oat varieties (YTA, CNC, B3, Q473 and Q444). The cutting frequency and time significantly affected forage yield and quality of five varieties with the effects being different among the five varieties. T3 increased hay yield and crude protein yield than T2. The dry hay yield and crude protein yield of T2 were all significantly lower when compared to T1. YTA presented the maximum fresh grass yields, total hay yields and total crude proteinyields under all cutting treatments among five varieties. T3 also improved feed quality on S/L ratio, F/D ratio, CP, CF and CA compared to T2 treatment. The results showed that utilization of two cuttings ofoat artificial grasslands can be used to supply forage for livestock in alpine area. YTA is a good oat introduced variety which has higher hay yield and feeding quality even with two cuttings in alpine area