293 research outputs found
Spherical Hartree-Fock calculations with linear momentum projection before the variation.Part II: Spectral functions and spectroscopic factors
The hole--spectral functions and from these the spectroscopic factors have
been calculated in an Galilei--invariant way for the ground state wave
functions resulting from spherical Hartree--Fock calculations with projection
onto zero total linear momentum before the variation for the nuclei 4He, 12C,
16O, 28Si, 32S and 40Ca. The results are compared to those of the conventional
approach which uses the ground states resulting from usual spherical
Hartree--Fock calculations subtracting the kinetic energy of the center of mass
motion before the variation and to the results obtained analytically with
oscillator occupations.Comment: 16 pages, 22 postscript figure
Schiff Theorem and the Electric Dipole Moments of Hydrogen-Like Atoms
The Schiff theorem is revisited in this work and the residual - and
-odd electron--nucleus interaction, after the shielding takes effect, is
completely specified. An application is made to the electric dipole moments of
hydrogen-like atoms, whose qualitative features and systematics have important
implication for realistic paramagnetic atoms.Comment: 3 pages. Contribution to PANIC05, Particles and Nuclei International
Conference, Santa Fe, New Mexico, Oct. 24-28, 200
The Statistical Multifragmentation Model with Skyrme Effective Interactions
The Statistical Multifragmentation Model is modified to incorporate the
Helmholtz free energies calculated in the finite temperature Thomas-Fermi
approximation using Skyrme effective interactions. In this formulation, the
density of the fragments at the freeze-out configuration corresponds to the
equilibrium value obtained in the Thomas-Fermi approximation at the given
temperature. The behavior of the nuclear caloric curve at constant volume is
investigated in the micro-canonical ensemble and a plateau is observed for
excitation energies between 8 and 10 MeV per nucleon. A kink in the caloric
curve is found at the onset of this gas transition, indicating the existence of
a small excitation energy region with negative heat capacity. In contrast to
previous statistical calculations, this situation takes place even in this case
in which the system is constrained to fixed volume. The observed phase
transition takes place at approximately constant entropy. The charge
distribution and other observables also turn out to be sensitive to the
treatment employed in the calculation of the free energies and the fragments'
volumes at finite temperature, specially at high excitation energies. The
isotopic distribution is also affected by this treatment, which suggests that
this prescription may help to obtain information on the nuclear equation of
state
Quantitative assessment of required separator fluid volume in multi-infusion settings
Background: Administering a separator fluid between incompatible solutions can optimize the use of intravenous lumens. Factors affecting the required separator fluid volume to safely separate incompatible solutions are unknown. Methods: An intravenous tube (2-m, 2-mL, 6-French) containing methylene blue dye was flushed with separator fluid until a methylene blue concentration ⩽2% from initial was reached. Independent variables were administration rate, dye solvent (glucose 5% and NaCl 0.9%), and separator fluid. In the second part of the study, methylene blue, separator fluid, and eosin yellow were administered in various administration profiles using 2- and 4-mL (2 × 2 m, 4-mL, 6-French) intravenous tubes. Results: Neither administration rate nor solvent affected the separator fluid volume (p = 0.24 and p = 0.12, respectively). Glucose 5% as separator fluid required a marginally smaller mean ± SD separator fluid volume than NaCl 0.9% (3.64 ± 0.13 mL vs 3.82 ± 0.11 mL, p < 0.001). Using 2-mL tubing required less separator fluid volume than 4-mL tubing for methylene blue (3.89 ± 0.57 mL vs 4.91 ± 0.88 mL, p = 0.01) and eosin yellow (4.41 ± 0.56 mL vs 5.63 ± 0.15 mL, p < 0.001). Extended tubing required less separator fluid volume/mL of tubing than smaller tubing for both methylene blue (2 vs 4 mL, 1.54 ± 0.22 vs 1.10 ± 0.19, p < 0.001) and eosin yellow (2 vs 4 mL, 1.75 ± 0.22 vs 1.25 ± 0.03, p < 0.001). Conclusion: The separator fluid volume was neither affected by the administration rate nor by solvent. Glucose 5% required a marginally smaller separator fluid volume than NaCl 0.9%, however its clinical impact is debatable. A larger intravenous tubing volume requires a larger separator fluid volume. However, the ratio of separator fluid volume to the tubing’s volume decreases as the tubing volume increases
Use of infrared thermography in the detection of superficial phlebitis in adult intensive care unit patients:A prospective single-center observational study
Common methods to detect phlebitis may not be sufficient for patients in the intensive care unit (ICU). The goal of this study was to investigate the feasibility of infrared (IR) thermography to objectively detect phlebitis in adult ICU patients. We included a total of 128 adult ICU-patients in a pilot and subsequent validation study. Median [interquartile range] age was 62 [54-71] years and 88 (69%) patients were male. Severity of phlebitis was scored using the visual infusion phlebitis (VIP)-score, ranging from 0 (no phlebitis) to 5 (thrombophlebitis). The temperature difference (ΔT) between the insertion site and a proximal reference point was measured with IR thermography. In 78 (34%) catheters early phlebitis and onset of moderate phlebitis was observed (VIP-score of 1-3). In both the pilot and the validation study groups ΔT was significantly higher when the VIP-score was ≥1 compared to a VIP-score of 0 (p<0.01 and p<0.001, respectively). Multivariate analysis identified ΔT (p<0.001) and peripheral venous catheter (PVC) dwell time (p = 0.001) as significantly associated with phlebitis. IR thermography may be a promising technique to identify phlebitis in the ICU. An increased ΔT as determined with thermography may be a risk factor for phlebitis
Threshold Effects in Multi-channel Coupling and Spectroscopic Factors in Exotic Nuclei
In the threshold region, the cross section and the associated overlap
integral obey the Wigner threshold law that results in the Wigner-cusp
phenomenon. Due to flux conservation, a cusp anomaly in one channel manifests
itself in other open channels, even if their respective thresholds appear at a
different energy. The shape of a threshold cusp depends on the orbital angular
momentum of a scattered particle; hence, studies of Wigner anomalies in weakly
bound nuclei with several low-lying thresholds can provide valuable
spectroscopic information. In this work, we investigate the threshold behavior
of spectroscopic factors in neutron-rich drip-line nuclei using the Gamow Shell
Model, which takes into account many-body correlations and the continuum
effects. The presence of threshold anomalies is demonstrated and the
implications for spectroscopic factors are discussed.Comment: Accepted in Physical Review C Figure correcte
A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS
A new East Fast-Extraction System is under construction in the SPS, to supply particles with a maximum batch length of 7.8 us and 10.5 us to the LHC and to CNGS (CERN Neutrino to Gran Sasso), respectively. The extraction septum magnets actually used at the SPS have been designed for slow extraction over several seconds, have large cooling and electrical power demands and need frequently maintenance in a high radiation environment. A fast system of only 250 us pulse duration has therefore been developed, using a half-sine excitation pulse with a superimposed third harmonic. The short pulse duration requires very thin magnetic yoke laminations, which can not easily be stamped and stacked. Profiting from a development for the LHC beam dump kicker magnets, the yoke is therefore built-up from tape-wound cylindrical cores, employing 50 um thick Si-steel tape. Thirty two cores are stacked longitudinally to produce a yoke of 3.2 meter length. The aperture is cut radial into each cylinder. The cores are radial compressed by spring-loaded pistons inserted in strong stainless-steel frames to provide mechanical stability. The 5+1 mm thick copper/iron septum is separated from the excitation current loop and acts as a passive eddy current screen. This allows separating the vacuum of the magnet from that of the circulating-beam channel, avoiding the need of using UHV material. This paper presents the magnet and generator prototype design as well as simulation and measurement results
Atomic Electric Dipole Moments: The Schiff Theorem and Its Corrections
Searches for the permanent electric dipole moments (EDMs) of diamagnetic
atoms provide powerful probes of CP-violating hadronic and semileptonic
interactions. The theoretical interpretation of such experiments, however,
requires careful implementation of a well-known theorem by Schiff that implies
a vanishing net EDM for an atom built entirely from point-like, nonrelativistic
constituents that interact only electrostatically. Any experimental observation
of a nonzero atomic EDM would result from corrections to the point-like,
nonrelativistic, electrostatic assumption. We reformulate Schiff's theorem at
the operator level and delineate the electronic and nuclear operators whose
atomic matrix elements generate corrections to "Schiff screening". We obtain a
form for the operator responsible for the leading correction associated with
finite nuclear size -- the so-called "Schiff moment" operator -- and observe
that it differs from the corresponding operator used in previous Schiff moment
computations. We show that the more general Schiff moment operator reduces to
the previously employed operator only under certain approximations that are not
generally justified. We also identify other corrections to Schiff screening
that may not be included properly in previous theoretical treatments. We
discuss practical considerations for obtaining a complete computation of
corrections to Schiff screening in atomic EDM calculations.Comment: 31 pages, 2 figures, typeset by REVTe
- …