7 research outputs found
Design and calibration of permanent magnet probes for the local measurement of velocity and temperature in a liquid metal backward facing step flow
Design of a mobile neutron spectrometer for the Laboratori Nazionali del Gran Sasso (LNGS)
Environmental neutrons are a source of background for rare event searches
(e.g., dark matter direct detection and neutrinoless double beta decay
experiments) taking place in deep underground laboratories. The overwhelming
majority of these neutrons are produced in the cavern walls by means of
intrinsic radioactivity of the rock and concrete. Their flux and spectrum
depend on time and location. Precise knowledge of this background is necessary
to devise sufficient shielding and veto mechanisms, improving the sensitivity
of the neutron-susceptible underground experiments. In this report, we present
the design and the expected performance of a mobile neutron detector for the
LNGS underground laboratory. The detector is based on capture-gated
spectroscopy technique and comprises essentially a stack of plastic
scintillator bars wrapped by gadolinium foils. The extensive simulation studies
demonstrate that the detector will be capable of measuring ambient neutrons at
low flux levels () at LNGS, where the ambient
gamma flux is by about 5 orders of magnitude larger
A novel ppm-precise absolute calibration method for precision high-voltage dividers
The most common method to measure direct current high voltage (HV) down to the ppm-level is to use resistive high-voltage dividers. Such devices scale the HV into a range where it can be compared with precision digital voltmeters to reference voltages sources, which can be traced back to Josephson voltage standards. So far the calibration of the scale factors of HV dividers for voltages above 1 kV could only be done at metrology institutes and sometimes involves round-robin tests among several institutions to get reliable results. Here we present a novel absolute calibration method based on the measurement of a differential scale factor, which can be performed with commercial equipment and outside metrology institutes. We demonstrate that reproducible measurements up to 35 kV can be performed with relative uncertainties below
1 · 10. This method is not restricted to metrology institutes and offers the possibility to determine the linearity of high-voltage dividers for a wide range of applications
A novel detector system for KATRIN to search for keV-scale sterile neutrinos
International audienceSterile neutrinos appear in minimal extensions of the Standard Model of particle physics. If their mass is in the keV regime, they are viable dark matter candidates. One way to search for sterile neutrinos in a laboratory-based experiment is via the analysis of β-decay spectra, where the new neutrino mass eigenstate would manifest itself as a kink-like distortion of the β-decay spectrum. The objective of the TRISTAN project is to extend the KATRIN setup with a new multi-pixel silicon drift detector system to search for a keV-scale sterile neutrino signal. In this paper we describe the requirements of such a new detector, and present first characterization measurement results obtained with a 7 pixel prototype system
First operation of the KATRIN experiment with tritium
The determination of the neutrino mass is one of the major challenges in astroparticle physics today. Direct neutrino mass experiments, based solely on the kinematics of β
β
-decay, provide a largely model-independent probe to the neutrino mass scale. The Karlsruhe Tritium Neutrino (KATRIN) experiment is designed to directly measure the effective electron antineutrino mass with a sensitivity of 0.2 eV
0.2 eV
(90%
90%
CL). In this work we report on the first operation of KATRIN with tritium which took place in 2018. During this commissioning phase of the tritium circulation system, excellent agreement of the theoretical prediction with the recorded spectra was found and stable conditions over a time period of 13 days could be established. These results are an essential prerequisite for the subsequent neutrino mass measurements with KATRIN in 2019
Quantitative Long-Term Monitoring of the Circulating Gases in the KATRIN Experiment Using Raman Spectroscopy.
The Karlsruhe Tritium Neutrino (KATRIN) experiment aims at measuring the effective electron neutrino mass with a sensitivity of 0.2 eV/c2, i.e., improving on previous measurements by an order of magnitude. Neutrino mass data taking with KATRIN commenced in early 2019, and after only a few weeks of data recording, analysis of these data showed the success of KATRIN, improving on the known neutrino mass limit by a factor of about two. This success very much could be ascribed to the fact that most of the system components met, or even surpassed, the required specifications during long-term operation. Here, we report on the performance of the laser Raman (LARA) monitoring system which provides continuous high-precision information on the gas composition injected into the experiment's windowless gaseous tritium source (WGTS), specifically on its isotopic purity of tritium-one of the key parameters required in the derivation of the electron neutrino mass. The concentrations cx for all six hydrogen isotopologues were monitored simultaneously, with a measurement precision for individual components of the order 10-3 or better throughout the complete KATRIN data taking campaigns to date. From these, the tritium purity, εT, is derived with precision of <10-3 and trueness of <3 × 10-3, being within and surpassing the actual requirements for KATRIN, respectively