Analysis of profit of generation company in power market

In recent decades, the operation of power systems in the power market model has been researched and applied by many countries. The profit of generation companies is always interested in research to ensure operation and balance of power market. This paper studies and analysis profit of generation companies to participate in the power market. In addition, this paper has analyzed the participation of new generation in the power market with 39-bus IEEE power system

A Study of SVC’s Impact Simulation and Analysis for Distance Protection Relay on Transmission Lines

This paper focuses on analyzing and evaluating impact of a Static Var Compensator (SVC) on the measured impedance at distance protection relay location on power transmission lines. The measured impedance at the relay location when a fault occurs on the line is determined by using voltage and current signals from voltage and current transformers at the relay and the type of fault occurred on the line. The MHO characteristic is applied to analyze impact of SVC on the distance protection relay. Based on the theory, the authors in this paper develop a simulation program on Matlab/Simulink software to analyze impact of SVC on the distance protection relay. In the power system model, it is supposed that the SVC is located at mid-point of the transmission line to study impact of SVC on the distance relay. The simulation results show that SVC will impact on the measured impedance at the relay when the fault occurs after the location of the SVC on the power transmission line

Economic load dispatch solutions considering multiple fuels for thermal units and generation cost of wind turbines

In this paper, economic load dispatch (ELD) problem is solved by applying a suggested improved particle swarm optimization (IPSO) for reaching the lowest total power generation cost from wind farms (WFs) and thermal units (TUs). The suggested IPSO is the modified version of Particle swarm optimization (PSO) by changing velocity and position updates. The five best solutions are employed to replace the so-far best position of each particle in velocity update mechanism and the five best solutions are used to replace previous position of each particle in position update. In addition, constriction factor is also used in the suggested IPSO. PSO, constriction factor-based PSO (CFPSO) and bat optimization algorithm (BOA) are also run for comparisons. Two systems are used to run the four methods. The first system is comprised of nine TUs with multiple fuels and one wind farm. The second system is comprised of eight TUs with multiple fuels and two WFs. From the comparisons of results, IPSO is much more powerful than three others and it can find optimal power generation with the lowest total power generation cost

Biocompatible chitosan-functionalized upconverting nanocomposites

Simultaneous integration of photon emission and biocompatibility into nanoparticles is an interesting strategy to develop applications of advanced optical materials. In this work, we present the synthesis of biocompatible optical nanocomposites from the combination of near-infrared luminescent lanthanide nanoparticles and water-soluble chitosan. NaYF4:Yb,Er upconverting nanocrystal guests and water-soluble chitosan hosts are prepared and integrated together into biofunctional optical composites. The control of aqueous dissolution, gelation, assembly, and drying of NaYF4:Yb,Er nanocolloids and chitosan liquids allowed us to design novel optical structures of spongelike aerogels and beadlike microspheres. Well-defined shape and near-infrared response lead upconverting nanocrystals to serve as photon converters to couple with plasmonic gold (Au) nanoparticles. Biocompatible chitosan-stabilized Au/NaYF4:Yb,Er nanocomposites are prepared to show their potential use in biomedicine as we find them exhibiting a half-maximal effective concentration (EC50) of 0.58 mg mL–1 for chitosan-stabilized Au/NaYF4:Yb,Er nanorods versus 0.24 mg mL–1 for chitosan-stabilized NaYF4:Yb,Er after 24 h. As a result of their low cytotoxicity and upconverting response, these novel materials hold promise to be interesting for biomedicine, analytical sensing, and other applications

On some multiplicity and mixed multiplicity formulas (Forum Math. 26(2014), 413-442)

This paper gives the additivity and reduction formulas for mixed multiplicities of multi-graded modules $M$ and mixed multiplicities of arbitrary ideals, and establishes the recursion formulas for the sum of all the mixed multiplicities of $M.$ As an application of these formulas we get the recursion formulas for the multiplicity of multi-graded Rees modules

Identification of nonlinear heat transfer laws from boundary observations

We consider the problem of identifying a nonlinear heat transfer law at the boundary, or of the temperature-dependent heat transfer coefficient in a parabolic equation from boundary observations. As a practical example, this model applies to the heat transfer coefficient that describes the intensity of heat exchange between a hot wire and the cooling water in which it is placed. We reformulate the inverse problem as a variational one which aims to minimize a misfit functional and prove that it has a solution. We provide a gradient formula for the misfit functional and then use some iterative methods for solving the variational problem. Thorough investigations are made with respect to several initial guesses and amounts of noise in the input data. Numerical results show that the methods are robust, stable and accurate

A hot-film air flow sensor for elevated temperatures

We report a novel packaging and experimental technique for characterizing thermal flow sensors at high temperatures. This paper first reports the fabrication of 3C-SiC (silicon carbide) on a glass substrate via anodic bonding, followed by the investigation of thermoresistive and Joule heating effects in the 3C-SiC nano-thin film heater. The high thermal coefficient of resistance of approximately −20 720 ppm/K at ambient temperature and −9287 ppm/K at 200 °C suggests the potential use of silicon carbide for thermal sensing applications in harsh environments. During the Joule heating test, a high-temperature epoxy and a brass metal sheet were utilized to establish the electric conduction between the metal electrodes and SiC heater inside a temperature oven. In addition, the metal wires from the sensor to the external circuitry were protected by a fiberglass insulating sheath to avoid short circuit. The Joule heating test ensured the stability of mechanical and Ohmic contacts at elevated temperatures. Using a hot-wire anemometer as a reference flow sensor, calibration tests were performed at 25 °C, 35 °C, and 45 °C. Then, the SiC hot-film sensor was characterized for a range of low air flow velocity, indicating a sensitivity of 5 mm−1 s. The air flow was established by driving a metal propeller connected to a DC motor and controlled by a microcontroller. The materials, metallization, and interconnects used in our flow sensor were robust and survived temperatures of around 200 °