240 research outputs found

    Study of Transient Interaction in a System with Transformer Supplied from Network through a Cable: Assessment of Interaction Frequencies and Resonance Evolvement

    Get PDF
    Transformer together with its windings is a complex oscillatory system. The interaction between the transformer and an electric network during transients can cause the development of resonance phenomenon in the windings leading to overvoltages and the risk of transformer fault. This report presents the results of studies of resonance phenomena in transformer windings, caused by interaction with an electric network containing the feeder cable. The approach to a simple assessment of dominant oscillation frequency of a voltage in the system “feeder cable – transformer” and estimation of the resonant frequencies of transformer winding is considered. The report also describes the technique for measurement of winding resonance voltages. The resonance phenomenon evolvement in transformer windings is considered and the impact of decaying oscillating applied voltage on maximum ratio of resonance overvoltages is estimated

    A 3D Finite-Difference BiCG Iterative Solver with the Fourier-Jacobi Preconditioner for the Anisotropic EIT/EEG Forward Problem

    Get PDF
    The Electrical Impedance Tomography (EIT) and electroencephalography (EEG) forward problems in anisotropic inhomogeneous media like the human head belongs to the class of the three-dimensional boundary value problems for elliptic equations with mixed derivatives. We introduce and explore the performance of several new promising numerical techniques, which seem to be more suitable for solving these problems. The proposed numerical schemes combine the fictitious domain approach together with the finite-difference method and the optimally preconditioned Conjugate Gradient- (CG-) type iterative method for treatment of the discrete model. The numerical scheme includes the standard operations of summation and multiplication of sparse matrices and vector, as well as FFT, making it easy to implement and eligible for the effective parallel implementation. Some typical use cases for the EIT/EEG problems are considered demonstrating high efficiency of the proposed numerical technique

    Cupriferous basalts of the Northern Urals

    Get PDF
    Characteristics and distinctive features of cupriferous basalts in the world are given. Deposits of the Superior Lake in the United States are considered as a reference. In the Northern Urals, drilling explored the Khultym’insk mineralized zone, associated with almond-stone olivine basalts and their tuffs of different granulometry. A detailed study of a new for the Urals type of copper mineralization into basalts for their conformity with known cupriferous volcanites. The main ore mineral is native copper, up to 10 mm size. Analysis of the distribution of native copper and sulphide mineralization in space according to drilling data made it possible to reveal mineral zonality in the area: the central part contains the releases of native copper, sulfide mineralization is developed on the periphery (both above and below in the section and in the flank parts), closer to the centre with a poor dissemination of chalcopyrite, and at a distance - pyrite. As a whole, the Khultym’inskaya mineralized zone has a gentle dip, thickness of up to 166-228 m and extent of up to 3500 m, including the intervals with the development of native copper, was discovered by drilling. This mineralized zone has been traced by inclination of more than 500 m. Despite its wide distribution, the mineralization is very dispersed and according to the results of testing the copper content is extremely low (less than 0.1%), and only a small number of samples contain more than 0.5% copper. Relatively elevated concentrations of copper (from 0.1 to >1%) are localized in spatially disconnected, small-sized bodies. The mineralized zone is controlled by thrust, it is probable that the ore-bearing fluids have been inflated over this structures. A copper ore manifestation of a new type, unconventional for the Urals with a stratified deposit of disseminated native copper in the basic section of the Upper Tournaisian age, has been revealed. The large areas occupied by rift basalts on the eastern slope of the Northern Urals make it possible to assume the prospect of this type mineralisation. Rift structures of Eastern Siberia are potential as well

    Coulomb dissociation of N 20,21

    Get PDF
    Neutron-rich light nuclei and their reactions play an important role in the creation of chemical elements. Here, data from a Coulomb dissociation experiment on N20,21 are reported. Relativistic N20,21 ions impinged on a lead target and the Coulomb dissociation cross section was determined in a kinematically complete experiment. Using the detailed balance theorem, the N19(n,Îł)N20 and N20(n,Îł)N21 excitation functions and thermonuclear reaction rates have been determined. The N19(n,Îł)N20 rate is up to a factor of 5 higher at

    Les droits disciplinaires des fonctions publiques : « unification », « harmonisation » ou « distanciation ». A propos de la loi du 26 avril 2016 relative à la déontologie et aux droits et obligations des fonctionnaires

    Get PDF
    The production of tt‟ , W+bb‟ and W+cc‟ is studied in the forward region of proton–proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98±0.02 fb−1 . The W bosons are reconstructed in the decays W→ℓΜ , where ℓ denotes muon or electron, while the b and c quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions.The production of tt‟t\overline{t}, W+bb‟W+b\overline{b} and W+cc‟W+c\overline{c} is studied in the forward region of proton-proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98 ±\pm 0.02 \mbox{fb}^{-1}. The WW bosons are reconstructed in the decays W→ℓΜW\rightarrow\ell\nu, where ℓ\ell denotes muon or electron, while the bb and cc quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions

    Physics case for an LHCb Upgrade II - Opportunities in flavour physics, and beyond, in the HL-LHC era

    Get PDF
    The LHCb Upgrade II will fully exploit the flavour-physics opportunities of the HL-LHC, and study additional physics topics that take advantage of the forward acceptance of the LHCb spectrometer. The LHCb Upgrade I will begin operation in 2020. Consolidation will occur, and modest enhancements of the Upgrade I detector will be installed, in Long Shutdown 3 of the LHC (2025) and these are discussed here. The main Upgrade II detector will be installed in long shutdown 4 of the LHC (2030) and will build on the strengths of the current LHCb experiment and the Upgrade I. It will operate at a luminosity up to 2×1034 cm−2s−1, ten times that of the Upgrade I detector. New detector components will improve the intrinsic performance of the experiment in certain key areas. An Expression Of Interest proposing Upgrade II was submitted in February 2017. The physics case for the Upgrade II is presented here in more depth. CP-violating phases will be measured with precisions unattainable at any other envisaged facility. The experiment will probe b → sl+l−and b → dl+l− transitions in both muon and electron decays in modes not accessible at Upgrade I. Minimal flavour violation will be tested with a precision measurement of the ratio of B(B0 → ÎŒ+Ό−)/B(Bs → ÎŒ+Ό−). Probing charm CP violation at the 10−5 level may result in its long sought discovery. Major advances in hadron spectroscopy will be possible, which will be powerful probes of low energy QCD. Upgrade II potentially will have the highest sensitivity of all the LHC experiments on the Higgs to charm-quark couplings. Generically, the new physics mass scale probed, for fixed couplings, will almost double compared with the pre-HL-LHC era; this extended reach for flavour physics is similar to that which would be achieved by the HE-LHC proposal for the energy frontier

    LHCb upgrade software and computing : technical design report

    Get PDF
    This document reports the Research and Development activities that are carried out in the software and computing domains in view of the upgrade of the LHCb experiment. The implementation of a full software trigger implies major changes in the core software framework, in the event data model, and in the reconstruction algorithms. The increase of the data volumes for both real and simulated datasets requires a corresponding scaling of the distributed computing infrastructure. An implementation plan in both domains is presented, together with a risk assessment analysis

    Measurement of CP violation parameters and polarisation fractions in Bs0→J/ψK‟∗0 {\mathrm{B}}_{\mathrm{s}}^0\to \mathrm{J}/\psi {\overline{\mathrm{K}}}^{\ast 0} decays

    Get PDF
    The first measurement of C ⁣P{C\!P} asymmetries in the decay Bs0→J/ψK‟∗(892)0{B_s^0\to J/\psi \overline{K}^{*}(892)^{0}} and an updated measurement of its branching fraction and polarisation fractions are presented. The results are obtained using data corresponding to an integrated luminosity of 3.0 fb−13.0\,fb^{-1} of proton-proton collisions recorded with the LHCb detector at centre-of-mass energies of 77 and 8 TeV8\,\mathrm{TeV}. Together with constraints from B0→J/ψρ0{B^0\to J/\psi \rho^0}, the results are used to constrain additional contributions due to penguin diagrams in the C ⁣P{C\!P}-violating phase ϕs{{\phi}_{s}}, measured through Bs0{B_s^0} decays to charmonium.The first measurement of CP asymmetries in the decay Bs0→J/ψK‟∗(892)0 {B}_s^0\to J/\psi {\overline{\mathrm{K}}}^{\ast }{(892)}^0 and an updated measurement of its branching fraction and polarisation fractions are presented. The results are obtained using data corresponding to an integrated luminosity of 3.0 fb^{−}^{1} of proton-proton collisions recorded with the LHCb detector at centre-of-mass energies of 7 and 8 TeV. Together with constraints from B0^{0} → J/ψ ρ0^{0}, the results are used to constrain additional contributions due to penguin diagrams in the CP -violating phase ϕs_{s} , measured through Bs0_{s}^{0} decays to charmonium.The first measurement of C ⁣P{C\!P} asymmetries in the decay Bs0→J/ψK‟∗(892)0{B_s^0\to J/\psi \overline{K}^{*}(892)^{0}} and an updated measurement of its branching fraction and polarisation fractions are presented. The results are obtained using data corresponding to an integrated luminosity of 3.0 fb−13.0\,fb^{-1} of proton-proton collisions recorded with the LHCb detector at centre-of-mass energies of 77 and 8 TeV8\,\mathrm{TeV}. Together with constraints from B0→J/ψρ0{B^0\to J/\psi \rho^0}, the results are used to constrain additional contributions due to penguin diagrams in the C ⁣P{C\!P}-violating phase ϕs{{\phi}_{s}}, measured through Bs0{B_s^0} decays to charmonium

    Measurement of the J/ψ pair production cross-section in pp collisions at s=13 \sqrt{s}=13 TeV

    Get PDF
    The production cross-section of J/ψ pairs is measured using a data sample of pp collisions collected by the LHCb experiment at a centre-of-mass energy of s=13 \sqrt{s}=13 TeV, corresponding to an integrated luminosity of 279 ±11 pb−1^{−1}. The measurement is performed for J/ψ mesons with a transverse momentum of less than 10 GeV/c in the rapidity range 2.0 < y < 4.5. The production cross-section is measured to be 15.2 ± 1.0 ± 0.9 nb. The first uncertainty is statistical, and the second is systematic. The differential cross-sections as functions of several kinematic variables of the J/ψ pair are measured and compared to theoretical predictions.The production cross-section of J/ψJ/\psi pairs is measured using a data sample of pppp collisions collected by the LHCb experiment at a centre-of-mass energy of s=13 TeV\sqrt{s} = 13 \,{\mathrm{TeV}}, corresponding to an integrated luminosity of 279±11 pb−1279 \pm 11 \,{\mathrm{pb^{-1}}}. The measurement is performed for J/ψJ/\psi mesons with a transverse momentum of less than 10 GeV/c10 \,{\mathrm{GeV}}/c in the rapidity range 2.0<y<4.52.0<y<4.5. The production cross-section is measured to be 15.2±1.0±0.9 nb15.2 \pm 1.0 \pm 0.9 \,{\mathrm{nb}}. The first uncertainty is statistical, and the second is systematic. The differential cross-sections as functions of several kinematic variables of the J/ψJ/\psi pair are measured and compared to theoretical predictions
    • 

    corecore