Self Piercing Riveting for Metal-Polymer Joints

Self-Piercing Riveting (SPR) is a sheet metal joining technique based on the insertion of a rivet into two or more sheets, with no preparatory hole. This process has gained wide diffusion in the automotive industry, due to the increasing use of materials alternative to steel, that are difficult or impossible to join with traditional techniques. In particular, polymeric materials are becoming increasingly used, due to their favorable weight/strength ratio. This paper reports the results of experimental investigations, aimed at identifying the variables affecting the mechanical characteristics of mixed metal-plastic joints. A statistic model for the optimization of the geometrical parameters has been computed. The paper demonstrates that self-piercing riveting appears competitive for metal/polymer junction. The results analyzed in light of statistical techniques show that some geometrical parameters affect joint performance more than others and can therefore be used as independent variables for joint performance optimizatio

Conventional and organic cropping systems at Suitia II: Crop growth and yield

Crop yields between 1982 and 1988 are reported here as a part of a cropping system experiment carried out at Suitia, Southern Finland. The soil was silty clay. There were four conventional and four organic systems: conventional cropping systems for barley monoculture, cereal production, diverse plant production, or a cattle farm, and organic cropping systems either for plant production with or without composting, or for cattle farms with or without composting. The crop sequences were fixed by six-year rotations, carried out in two phases. There were great differences in yields between the years, and the organic cropping systems were more negatively affected by poor growing conditions than the conventional ones. In the organic systems, the barley yields in 1985 and in 1988 were 25 % of the yields obtained from conventional stands, when the latter yielded about 3 t/ha. In better years, barley in the organic plant production yielded 50 % of the yield obtained in conventional barley monoculture (6 t/ha). It was not possible to differentiate between the effects of two different causes the preceeding crop and annual variation. The yields obtained with ’organic’ winter wheat and oats (+ Vicia faba) were 40 % of those from the respective conventional pure stands. The clover-grass leys of the organic systems yielded as much as the conventional grass leys until they were destroyed by water and the resulting ice cover during winter. Compared to those of ‘conventional’ system, the ‘organic’ system gave annual mean yields of potato varying from 37 % of the 16 t/ha obtained conventionally to 48% of the 21 t/ha obtained conventionally. Barley variety was found to interact with cropping system in 1988, a year characterised by draught stress. In 1989, in a separate trial carried out on the same field, an interaction between soil wetness (location) and cropping system was observed. Wetness of soil in winter seemed to interfere more severely in the organic system than in the conventional one. Because the uncontrolled variation of the field itself as to topography and drainage makes the comparisons between the organic and the conventional systems somewhat biased and unreliable, these results should not be generalised to cover the overall question of yield level in organic cropping

Seed yield and seed quality of subterranean clover (Trifolium subterraneum L.) in growing conditions of Finland

Seed yield and overwintering of seeds of 22 Australian subterranean clover varieties were investigated in 1986 and 1987 at the Viikki Experimental Farm of the University of Helsinki. The seed yield varied remarkbly according to the variety and weather conditions of the two summers. Some varieties, such as Seaton Park, Woogenellup and Karridale, and during the summer of 1987 also the early variety Dalkeith, produced lots of seed. Some late varieties, e.g. Treeton, Tallarook and Esperance, produced very few seeds or no seeds at all. A considerable proportion of the seeds degenerated during the wet autumn conditions, by the end of October. Many seeds showed embryo dormancy, but complete dormancy or hard seeds were found only exeptionally. In spring 1988, some seedlings which had developed from overwintered burrs were found. There seems to be little hope of finding self-seeding subterranean clovers suitable for Finnish growing conditions

The effect of microstructure on mechanical properties of HVOF sprayed WC-CoCr composite coatings

This study aims for deeper understanding of the composition and phase changes occurring during HVOF spraying of the powder to WC-CoCr coatings. Also, the effect of lamellar microstructure on the mechanical properties is studied. Compositional and microstructural features are studied by means of X-ray diffraction, XRF, FE-SEM and TEM (EDX, EELS). Mechanical properties are mainly studied by different instrumented indentation and nanoindentation techniques. The use of two new fracture parameters, complementing the fracture toughness value of the coating, are proposed and examined. Higher load range indentations are used to measure cross-sectional and surface hardness, elastic modulus and fracture toughness of the coatings. Mechanical properties of individual phases are studied by nanoindentation. To our knowledge this is the first time that the mechanical properties of this amorphous/nanocrystalline matrix are studied. ICP (In-situ Coating Property) sensor, developed for quality control and residual stress evaluation, is also used to measure the elastic modulus and coefficient of thermal expansion (CTE) of the coatings. Abrasion wear resistance of the coatings are studied according to standard ASTM G 65D. Because of the brittle nature of HVOF coatings, the main focus of this study is in the effects of coating microstructure on fracture toughness, and on crack initiation and propagation resistance. It is shown that even when two similar coatings have equal indentation fracture toughness values, the critical crack initiation loads may be very different. This new parameter is expected to be extremely useful in the evaluation of the coating performance under loading conditions

Evaluating the impact of pyrethroid insecticide resistance on reproductive fitness in Sitobion avenae

Resistance to insecticides used to control pests is an issue of increasing concern for agriculture. The grain aphid, Sitobion avenae, is a pest of cereals and grasses worldwide, and one of growing concern due to the evolution of resistance to certain insecticides. Resistance confers benefits to insects by enabling them to survive exposure to insecticide compounds; however, the mutations conferring resistance may also penalise the insect in pesticide-free environments due to fitness costs associated with the new phenotype. Here we tested the hypothesis of a reproductive penalty linked to the knockdown resistance mutation (kdr) to pyrethroid insecticides. The mutation occurs predominantly in a single SA3 clone. To date, only heterozygous-resistant forms (kdr-SR) have been detected in populations in Ireland and the UK, and this suggests that a fitness penalty may preclude the formation of both male and female heterozygous-resistant sexual forms. By designing an experiment which included a resistant and a non-resistant clone, we were able to simulate reduced daylight and temperature conditions which, in nature, trigger sexual reproduction and therefore study the responses of each clone. This allowed us to detect the switch from asexual females to sexual females and males and report on the conditions associated with the production of sexual forms. The results showed that both aphid clones were able to produce sexual forms with no difference in the onset of sexual reproduction, although reproductive strategies differed between clones. The later onset of male forms in the SA3 clone may decrease the likelihood of mating interactions to create fully resistant (kdr-RR) genotypes and this may constitute a fitness penalty due to pyrethroid resistance

Planck-LFI radiometers' spectral response

The Low Frequency Instrument (LFI) is an array of pseudo-correlation radiometers on board the Planck satellite, the ESA mission dedicated to precision measurements of the Cosmic Microwave Background. The LFI covers three bands centred at 30, 44 and 70 GHz, with a goal bandwidth of 20% of the central frequency. The characterization of the broadband frequency response of each radiometer is necessary to understand and correct for systematic effects, particularly those related to foreground residuals and polarization measurements. In this paper we present the measured band shape of all the LFI channels and discuss the methods adopted for their estimation. The spectral characterization of each radiometer was obtained by combining the measured spectral response of individual units through a dedicated RF model of the LFI receiver scheme. As a consistency check, we also attempted end-to-end spectral measurements of the integrated radiometer chain in a cryogenic chamber. However, due to systematic effects in the measurement setup, only qualitative results were obtained from these tests. The measured LFI bandpasses exhibit a moderate level of ripple, compatible with the instrument scientific requirements.Comment: 16 pages, 9 figures, this paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jins

Red-cell ICAM-4 is a ligand for the monocyte/macrophage integrinCD11c/CD18 : characterization of the binding sites on ICAM-4

Intercellular adhesion molecule-4 (ICAM-4) is a unique member of the ICAM family due to its specific expression on erythroid cells and ability to interact with several types of integrins expressed on blood and endothelial cells. The first reported receptors for ICAM-4 were CD11a/CD18 and CD11b/CD18. In contrast to these two, the cellular ligands and the functional role of the third beta2-integrin, CD11c/CD18, have not been well defined. Here we show that ICAM-4 functions as a ligand for the monocyte/macrophage specific CD11c/CD18. Deletion of the individual immunoglobulin domains of ICAM-4 demonstrated that both its domains contain binding sites for CD11c/CD18. Analysis of a panel of ICAM-4 point mutants identified residues that affected binding to the integrin. By molecular modeling the important residues were predicted to cluster in two distinct but spatially close regions of the first domain with an extension to the second domain spatially distant from the other residues. We also identified two peptides derived from sequences of ICAM-4 that are capable of modulating the binding to CD11c/CD18. CD11c/CD18 is expressed on macrophages in spleen and bone marrow. Inhibition of erythrophagocytosis by anti-ICAM-4 and anti-integrin antibodies suggests a role for these interactions in removal of senescent red cells

The linearity response of the Planck-LFI flight model receivers

In this paper we discuss the linearity response of the Planck-LFI receivers, with particular reference to signal compression measured on the 30 and 44 GHz channels. In the article we discuss the various sources of compression and present a model that accurately describes data measured during tests performed with individual radiomeric chains. After discussing test results we present the best parameter set representing the receiver response and discuss the impact of non linearity on in-flight calibration, which is shown to be negligible.Comment: this paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jinst; This is an author-created, un-copyedited version of an article accepted for publication in JINST. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The definitive publisher authenticated version is available online at 10.1088/1748-0221/4/12/T12011

The Planck-LFI flight model composite waveguides

The Low Frequency Instrument on board the PLANCK satellite is designed to give the most accurate map ever of the CMB anisotropy of the whole sky over a broad frequency band spanning 27 to 77 GHz. It is made of an array of 22 pseudo-correlation radiometers, composed of 11 actively cooled (20 K) Front End Modules (FEMs), and 11 Back End Modules (BEMs) at 300K. The connection between the two parts is made with rectangular Wave Guides. Considerations of different nature (thermal, electromagnetic and mechanical), imposed stringent requirements on the WGs characteristics and drove their design. From the thermal point of view, the WG should guarantee good insulation between the FEM and the BEM sections to avoid overloading the cryocooler. On the other hand it is essential that the signals do not undergo excessive attenuation through the WG. Finally, given the different positions of the FEM modules behind the focal surface and the mechanical constraints given by the surrounding structures, different mechanical designs were necessary. A composite configuration of Stainless Steel and Copper was selected to satisfy all the requirements. Given the complex shape and the considerable length (about 1.5-2 m), manufacturing and testing the WGs was a challenge. This work deals with the development of the LFI WGs, including the choice of the final configuration and of the fabrication process. It also describes the testing procedure adopted to fully characterize these components from the electromagnetic point of view and the space qualification process they underwent. Results obtained during the test campaign are reported and compared with the stringent requirements. The performance of the LFI WGs is in line with requirements, and the WGs were successfully space qualified.Comment: this paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jins

Barriers and facilitators for treatment-seeking for mental health conditions and substance misuse:Multi-perspective focus group study within the military

Background Globally, millions are exposed to stressors at work that increase their vulnerability to develop mental health conditions and substance misuse (such as soldiers, policemen, doctors). However, these types of professionals especially are expected to be strong and healthy, and this contrast may worsen their treatment gap. Although the treatment gap in the military has been studied before, perspectives of different stakeholders involved have largely been ignored, even though they play an important role. Aims To study the barriers and facilitators for treatment-seeking in the military, from three different perspectives. Method In total, 46 people participated, divided into eight homogeneous focus groups, including three perspectives: soldiers with mental health conditions and substance misuse (n = 20), soldiers without mental health conditions and substance misuse (n = 10) and mental health professionals (n = 16). Sessions were audio-taped and transcribed verbatim. Content analysis was done by applying a general inductive approach using ATLAS.ti-8.4.4 software. Results Five barriers for treatment-seeking were identified: fear of negative career consequences, fear of social rejection, confidentiality concerns, the ‘strong worker’ workplace culture and practical barriers. Three facilitators were identified: social support, accessibility and knowledge, and healthcare within the military. The views of the different stakeholder groups were highly congruent. Conclusions Barriers for treatment-seeking were mostly stigma related (fear of career consequences, fear of social rejection and the ‘strong worker’ workplace culture) and this was widely recognised by all groups. Social support from family, peers, supervisors and professionals were identified as important facilitators. A decrease in the treatment gap for mental health conditions and substance misuse is needed and these findings provide direction for future research and destigmatising interventions