Product Liability for a Defective House

The position of the American courts regarding the matter of the liability of a builder-vendor for his work is best answered by examining cases from some of the various jurisdictions to see how the problem has been handled. A builder should be held to warrant his product to be free from defects and to be suitable for the use intended. The cases reflect the growing desire to provide the buyer of a new house with this protection. Yet, protection is generally extended only to one who buys a house which is not finished

Precise determination of muon and electromagnetic shower contents from shower universality property

We consider two new aspects of Extensive Air Shower development universality allowing to make accurate estimation of muon and electromagnetic (EM) shower contents in two independent ways. In the first case, to get muon (or EM) signal in water Cherenkov tanks or in scintillator detectors it is enough to know the vertical depth of shower maximum and the total signal in the ground detector. In the second case, the EM signal can be calculated from the primary particle energy and the zenith angle. In both cases the parametrizations of muon and EM signals are almost independent on primary particle nature, energy and zenith angle. Implications of the considered properties for mass composition and hadronic interaction studies are briefly discussed. The present study is performed on 28000 of proton, oxygen and iron showers, generated with CORSIKA 6.735 for $E^{-1}$ spectrum in the energy range log(E/eV)=18.5-20.0 and uniformly distributed in cos^2(theta) in zenith angle interval theta=0-65 degrees for QGSJET II/Fluka interaction models.Comment: Submitted to Phys. Rev.

Platinum(II) complexes with cyclometallated 5-pi-delocalized-donor-1,3-di(2-pyridyl)benzene ligands as efficient phosphors for NIR-OLEDs

Two new pincer proligands, namely 5-(p-(N,N-diphenylamino)phenylethynyl)-1,3-di(2-pyridyl)benzene (HL1) and trans-5-(p-(N,N-diphenylamino)styryl-1,3-di(2-pyridyl)benzene (HL2) were prepared together with their N^C^N-coordinated cyclometallated platinum(II) complexes PtL1X (X = Cl, NCS) and PtL2Cl. Both ligands are intensely luminescent in solution (quantum yields > 0.8). PtL1X complexes display high quantum yields in solution whereas that of PtL2Cl is very low due to the ease with which trans to cis isomerisation of the diphenylaminostyryl C[double bond, length as m-dash]C bond occurs. Distinct sets of emission bands attributable to the cis and trans forms are observable in glass at 77 K, the assignments being supported by TD-DFT calculations. Organic light-emitting diodes (OLEDs) have been prepared using the new compounds as phosphorescent emitters. Remarkably, despite the inferior quantum yield of PtL2Cl in solution, the best electroluminescence quantum efficiencies are obtained with this complex, which emerges as an excellent candidate for the preparation of NIR-OLEDs

The analog signal processing board for the HEAT telescopes

Abstract The aim of the Pierre Auger Observatory is to measure with high statistics the flux, the arrival directions and the mass composition of cosmic rays at the highest energies. Since 2009, the Auger Collaboration has added three new High Elevation Auger Telescopes (HEAT) along with a new 25 km 2 infill array in the field of view of the new telescopes. These enhancements have lowered the energy threshold of the Observatory by about an order of magnitude. In combination with the existing telescopes in Coihueco the vertical field of view is extended to about 60°, allowing the measurement of nearby air showers arising from primaries with energies as low as 2×10 17 eV. In this paper we describe the new front-end analog board developed to process the signals generated by the photomultipliers of the HEAT telescopes. Eighty analog boards have been produced, fully characterized and tested. The main characteristics of the electronic circuits and the circuit parameters are illustrated

The arcade project

The Atmospheric Research for Climate and Astroparticle Detection (ARCADE) project aims to a better comprehension of the limits of applicability, systematics and possible enhancements of the typical techniques used for the measurement of the aerosol attenuation profiles of UV light in cosmic rays and gamma rays experiments. Aerosols are indeed the most variable component in the atmosphere on a short time scale, and experiments based on the detection of the UV light in atmosphere need a continuous monitoring of the aerosol stratification to obtain a reliable evaluation of the properties of the primary particles. The ARCADE project is measuring the aerosol attenuation of UV light due to aerosols with multiple techniques and instruments simultaneously on the same air mass. For this purpose, a Raman + elastic Lidar with a laser source at 355 nm has been built and is currently taking data in Lamar, Colorado together with the Atmospheric Monitoring Telescope (AMT) to detect UV light at a distance of 40 km from the Lidar laser source. The system has been installed on site in 2014 and data were taken every month during moonless nights for one year. A full simulation of the AMT system has been developed. The setup and simulation of the system, together with the AMT calibration system and first collected data are shown

Prohepcidin Levels in Refractory Anaemia Caused by Lead Poisoning

Recent research evidence suggests a central role for hepcidin in iron homeostasis. Hepcidin is a hormone synthesized in the liver. Hepcidin is also thought to play a vital role in the pathogenic mechanism of anaemia in patients with inflammation or chronic disease. A 38-year-old female who presented with recurrent abdominal pain was found to have raised urinary porphyrins and a blood lead level of 779 μg/l. Her haemoglobin level was 8.3 g/dl. Her MCV was normal. Serum ferritin, B12 and folate were normal. Her serum prohepcidin level was 2,489 ng/ml (normal <450 ng/ml). To our knowledge, this is the first report of raised prohepcidin levels in a patient with anaemia of chronic disease resulting from lead poisoning

INFN Camera demonstrator for the Cherenkov Telescope Array

The Cherenkov Telescope Array is a world-wide project for a new generation of ground-based Cherenkov telescopes of the Imaging class with the aim of exploring the highest energy region of the electromagnetic spectrum. With two planned arrays, one for each hemisphere, it will guarantee a good sky coverage in the energy range from a few tens of GeV to hundreds of TeV, with improved angular resolution and a sensitivity in the TeV energy region better by one order of magnitude than the currently operating arrays. In order to cover this wide energy range, three different telescope types are envisaged, with different mirror sizes and focal plane features. In particular, for the highest energies a possible design is a dual-mirror Schwarzschild-Couder optical scheme, with a compact focal plane. A silicon photomultiplier (SiPM) based camera is being proposed as a solution to match the dimensions of the pixel (angular size of ~ 0.17 degrees). INFN is developing a camera demonstrator made by 9 Photo Sensor Modules (PSMs, 64 pixels each, with total coverage 1/4 of the focal plane) equipped with FBK (Fondazione Bruno Kessler, Italy) Near UltraViolet High Fill factor SiPMs and Front-End Electronics (FEE) based on a Target 7 ASIC, a 16 channels fast sampler (up to 2GS/s) with deep buffer, self-trigger and on-demand digitization capabilities specifically developed for this purpose. The pixel dimensions of $6\times6$ mm$^2$ lead to a very compact design with challenging problems of thermal dissipation. A modular structure, made by copper frames hosting one PSM and the corresponding FEE, has been conceived, with a water cooling system to keep the required working temperature. The actual design, the adopted technical solutions and the achieved results for this demonstrator are presented and discussed.Comment: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.0589