261 research outputs found
Influence of geometry on the emitting properties of 2,3-naphthalimides
The luminescence properties of 2,3-naphthalimides have been studied using picosecond and nanosecond spectroscopies.
In acetonitrile solution N-phenyl-2,3-naphthalimid(e3 ) is found to emit dual fluorescence with emission maxima at 385 and 490 nm, respectively. The short-wavelength emission corresponds to the known fluorescence of the naphthalimides and is demonstrated for 3 to originate from a molecular conformation in which the phenyl substituent and the naphthalimide skeleton are orthogonal to each other. The long-wavelength emission is assumed to originate from a singlet excited state formed by a ca. 90° rotation of the phenyl group so that the two moieties are coplanar. Only a small dipole moment change is found between this excited state and the ground state. Only short-wavelength emission is observed with a lifetime in the nanosecond range as in the case of 1 and 2 when phenyl rotation is blocked with a bulky ortho tert-butyl group (compound 4). Increasing the viscosity of a glycerol/ethanol medium enhances both the efficiency and the lifetime of the short-wavelength emission
of 3. It appears that at 77 K the emission originates directly from the Franck-Condon state. At room temperature, the other two emitting species are shown to arise from the Franck-Condon state by competitive intramolecular geometrical relaxation processes. Structures 5 and 6 are tentatively put forward to explain the formation of naphthazepinedione 8 by a 2 \pi + 2 \pi photochemical cycloaddition reaction
High temperature and high pressure plasma electrolysis experiments
Ohmori et al. (1), then Mizuno et al. (2,3) showed in high voltage-high current electrolysis experiments the production of excess heat and abnormal production of hydrogen. Cirillo et al. (4) have shown transmutation of elements on the tungsten cathode during similar types of plasma electrolysis. Also, Fauvarque et al. (5) have shown the production of excess heat. All these experiments have been performed with light water at boiling temperature i.e. 100[degrees]C and atmospheric pressure. We have developed a new calorimeter that can operate at higher temperatures and higher pressures. The cell is of cylindrical shape made of Teflon 10 cm in diameter and 21 cm high. The cell is positioned on a balance in order to measure continuously the weight loss of the cell during operation. The tungsten cathode of various diameters is located at the center of the cell, and the anode is a stainless steel foil surrounding the cathode. A mechanical pressure gauge permits the measurement of the pressure of the cell. The temperature is calculated from the pressure temperature boiling curve. A calibrated relief valve keeps the pressure constant in the cell. The electrical input power is measured by a high-speed wattmeter, and the heat produced is calculated from the weight loss of the cell. The cell is also equipped with a resistor for calibration of the system, and heating the water to boiling prior to the start of the electrolysis. At the conference we will give the new results showing the influence of the pressure and the temperature to the excess heat
A critical appraisal of guidelines for the management of knee osteoarthritis using Appraisal of Guidelines Research and Evaluation criteria
Clinical practice guidelines have been elaborated to summarize evidence related to the management of knee osteoarthritis and to facilitate uptake of evidence-based knowledge by clinicians. The objectives of the present review were summarizing the recommendations of existing guidelines on knee osteoarthritis, and assessing the quality of the guidelines using a standardized and validated instrument – the Appraisal of Guidelines Research and Evaluation (AGREE) tool. Internet medical literature databases from 2001 to 2006 were searched for guidelines, with six guidelines being identified. Thirteen clinician researchers participated in the review. Each reviewer was trained in the AGREE instrument. The guidelines were distributed to four groups of three or four reviewers, each group reviewing one guideline with the exception of one group that reviewed two guidelines. One independent evaluator reviewed all guidelines. All guidelines effectively addressed only a minority of AGREE domains. Clarity/presentation was effectively addressed in three out of six guidelines, scope/purpose and rigour of development in two guidelines, editorial independence in one guideline, and stakeholder involvement and applicability in none. The clinical management recommendation tended to be similar among guidelines, although interventions addressed varied. Acetaminophen was recommended for initial pain treatment, combined with exercise and education. Nonsteroidal anti-inflammatory drugs were recommended if acetaminophen failed to control pain, but cautiously because of gastrointestinal risks. Surgery was recommended in the presence of persistent pain and disability. Education and activity management interventions were superficially addressed in most guidelines. Guideline creators should use the AGREE criteria when developing guidelines. Innovative and effective methods of knowledge translation to health professionals are needed
Les droits disciplinaires des fonctions publiques : « unification », « harmonisation » ou « distanciation ». A propos de la loi du 26 avril 2016 relative à la déontologie et aux droits et obligations des fonctionnaires
The production of tt‾ , W+bb‾ and W+cc‾ is studied in the forward region of proton–proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98±0.02 fb−1 . The W bosons are reconstructed in the decays W→ℓν , where ℓ denotes muon or electron, while the b and c quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions.The production of , and is studied in the forward region of proton-proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98 0.02 \mbox{fb}^{-1}. The bosons are reconstructed in the decays , where denotes muon or electron, while the and quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions
Extracorporeal Membrane Oxygenation for Severe Acute Respiratory Distress Syndrome associated with COVID-19: An Emulated Target Trial Analysis.
RATIONALE: Whether COVID patients may benefit from extracorporeal membrane oxygenation (ECMO) compared with conventional invasive mechanical ventilation (IMV) remains unknown. OBJECTIVES: To estimate the effect of ECMO on 90-Day mortality vs IMV only Methods: Among 4,244 critically ill adult patients with COVID-19 included in a multicenter cohort study, we emulated a target trial comparing the treatment strategies of initiating ECMO vs. no ECMO within 7 days of IMV in patients with severe acute respiratory distress syndrome (PaO2/FiO2 <80 or PaCO2 ≥60 mmHg). We controlled for confounding using a multivariable Cox model based on predefined variables. MAIN RESULTS: 1,235 patients met the full eligibility criteria for the emulated trial, among whom 164 patients initiated ECMO. The ECMO strategy had a higher survival probability at Day-7 from the onset of eligibility criteria (87% vs 83%, risk difference: 4%, 95% CI 0;9%) which decreased during follow-up (survival at Day-90: 63% vs 65%, risk difference: -2%, 95% CI -10;5%). However, ECMO was associated with higher survival when performed in high-volume ECMO centers or in regions where a specific ECMO network organization was set up to handle high demand, and when initiated within the first 4 days of MV and in profoundly hypoxemic patients. CONCLUSIONS: In an emulated trial based on a nationwide COVID-19 cohort, we found differential survival over time of an ECMO compared with a no-ECMO strategy. However, ECMO was consistently associated with better outcomes when performed in high-volume centers and in regions with ECMO capacities specifically organized to handle high demand. This article is open access and distributed under the terms of the Creative Commons Attribution Non-Commercial No Derivatives License 4.0 (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Measurement of forward production in collisions at TeV
A measurement of the cross-section for production in collisions is presented using data corresponding to an integrated luminosity of fb collected by the LHCb experiment at a centre-of-mass energy of TeV. The electrons are required to have more than GeV of transverse momentum and to lie between 2.00 and 4.25 in pseudorapidity. The inclusive production cross-sections, where the decays to , are measured to be \begin{align*} \begin{split} \sigma_{W^{+} \to e^{+}\nu_{e}}&=1124.4\pm 2.1\pm 21.5\pm 11.2\pm 13.0\,\mathrm{pb},\\ \sigma_{W^{-} \to e^{-}\bar{\nu}_{e}}&=\,\,\,809.0\pm 1.9\pm 18.1\pm\,\,\,7.0\pm \phantom{0}9.4\,\mathrm{pb}, \end{split} \end{align*} where the first uncertainties are statistical, the second are systematic, the third are due to the knowledge of the LHC beam energy and the fourth are due to the luminosity determination. Differential cross-sections as a function of the electron pseudorapidity are measured. The cross-section ratio and production charge asymmetry are also reported. Results are compared with theoretical predictions at next-to-next-to-leading order in perturbative quantum chromodynamics. Finally, in a precise test of lepton universality, the ratio of boson branching fractions is determined to be \begin{align*} \begin{split} \mathcal{B}(W \to e\nu)/\mathcal{B}(W \to \mu\nu)=1.020\pm 0.002\pm 0.019, \end{split} \end{align*} where the first uncertainty is statistical and the second is systematic.A measurement of the cross-section for production in collisions is presented using data corresponding to an integrated luminosity of fb collected by the LHCb experiment at a centre-of-mass energy of TeV. The electrons are required to have more than GeV of transverse momentum and to lie between 2.00 and 4.25 in pseudorapidity. The inclusive production cross-sections, where the decays to , are measured to be \begin{equation*} \sigma_{W^{+} \to e^{+}\nu_{e}}=1124.4\pm 2.1\pm 21.5\pm 11.2\pm 13.0\,\mathrm{pb}, \end{equation*} \begin{equation*} \sigma_{W^{-} \to e^{-}\bar{\nu}_{e}}=\,\,\,809.0\pm 1.9\pm 18.1\pm\,\,\,7.0\pm \phantom{0}9.4\,\mathrm{pb}, \end{equation*} where the first uncertainties are statistical, the second are systematic, the third are due to the knowledge of the LHC beam energy and the fourth are due to the luminosity determination. Differential cross-sections as a function of the electron pseudorapidity are measured. The cross-section ratio and production charge asymmetry are also reported. Results are compared with theoretical predictions at next-to-next-to-leading order in perturbative quantum chromodynamics. Finally, in a precise test of lepton universality, the ratio of boson branching fractions is determined to be \begin{equation*} \mathcal{B}(W \to e\nu)/\mathcal{B}(W \to \mu\nu)=1.020\pm 0.002\pm 0.019, \end{equation*} where the first uncertainty is statistical and the second is systematic.A measurement of the cross-section for W → eν production in pp collisions is presented using data corresponding to an integrated luminosity of 2 fb collected by the LHCb experiment at a centre-of-mass energy of TeV. The electrons are required to have more than 20 GeV of transverse momentum and to lie between 2.00 and 4.25 in pseudorapidity. The inclusive W production cross-sections, where the W decays to eν, are measured to be where the first uncertainties are statistical, the second are systematic, the third are due to the knowledge of the LHC beam energy and the fourth are due to the luminosity determination
Measurements of prompt charm production cross-sections in pp collisions at TeV
Production cross-sections of prompt charm mesons are measured using data from collisions at the LHC at a centre-of-mass energy of TeV. The data sample corresponds to an integrated luminosity of pb collected by the LHCb experiment. The production cross-sections of , , , and mesons are measured in bins of charm meson transverse momentum, , and rapidity, . They cover the rapidity range and transverse momentum ranges for and and for and mesons. The inclusive cross-sections for the four mesons, including charge-conjugate states, within the range of are determined to be \begin{equation*} \sigma(pp\rightarrow D^0 X) = 1190 \pm 3 \pm 64\,\mu\text{b} \end{equation*} \begin{equation*} \sigma(pp\rightarrow D^+ X) = 456 \pm 3 \pm 34\,\mu\text{b} \end{equation*} \begin{equation*} \sigma(pp\rightarrow D_s^+ X) = 195 \pm 4 \pm 19\,\mu\text{b} \end{equation*} \begin{equation*} \sigma(pp\rightarrow D^{*+} X)= 467 \pm 6 \pm 40\,\mu\text{b} \end{equation*} where the uncertainties are statistical and systematic, respectively.Production cross-sections of prompt charm mesons are measured using data from pp collisions at the LHC at a centre-of-mass energy of 5 TeV. The data sample corresponds to an integrated luminosity of 8.60 ± 0.33 pb collected by the LHCb experiment. The production cross-sections of D, D, D , and D mesons are measured in bins of charm meson transverse momentum, p, and rapidity, y. They cover the rapidity range 2.0 < y < 4.5 and transverse momentum ranges 0 < p < 10 GeV/c for D and D and 1 < p < 10 GeV/c for D and D mesons. The inclusive cross-sections for the four mesons, including charge-conjugate states, within the range of 1 < p < 8 GeV/c are determined to be where the uncertainties are statistical and systematic, respectively.Production cross-sections of prompt charm mesons are measured using data from collisions at the LHC at a centre-of-mass energy of TeV. The data sample corresponds to an integrated luminosity of pb collected by the LHCb experiment. The production cross-sections of , , , and mesons are measured in bins of charm meson transverse momentum, , and rapidity, . They cover the rapidity range and transverse momentum ranges for and and for and mesons. The inclusive cross-sections for the four mesons, including charge-conjugate states, within the range of are determined to be \sigma(pp\rightarrow D^0 X) = 1004 \pm 3 \pm 54\,\mu\text{b} \sigma(pp\rightarrow D^+ X) = 402 \pm 2 \pm 30\,\mu\text{b} \sigma(pp\rightarrow D_s^+ X) = 170 \pm 4 \pm 16\,\mu\text{b} \sigma(pp\rightarrow D^{*+} X)= 421 \pm 5 \pm 36\,\mu\text{b} where the uncertainties are statistical and systematic, respectively
Measurement of the J/ψ pair production cross-section in pp collisions at TeV
The production cross-section of J/ψ pairs is measured using a data sample of pp collisions collected by the LHCb experiment at a centre-of-mass energy of TeV, corresponding to an integrated luminosity of 279 ±11 pb. The measurement is performed for J/ψ mesons with a transverse momentum of less than 10 GeV/c in the rapidity range 2.0 < y < 4.5. The production cross-section is measured to be 15.2 ± 1.0 ± 0.9 nb. The first uncertainty is statistical, and the second is systematic. The differential cross-sections as functions of several kinematic variables of the J/ψ pair are measured and compared to theoretical predictions.The production cross-section of pairs is measured using a data sample of collisions collected by the LHCb experiment at a centre-of-mass energy of , corresponding to an integrated luminosity of . The measurement is performed for mesons with a transverse momentum of less than in the rapidity range . The production cross-section is measured to be . The first uncertainty is statistical, and the second is systematic. The differential cross-sections as functions of several kinematic variables of the pair are measured and compared to theoretical predictions
Measurement of the B0s→μ+μ− Branching Fraction and Effective Lifetime and Search for B0→μ+μ− Decays
A search for the rare decays Bs0→μ+μ- and B0→μ+μ- is performed at the LHCb experiment using data collected in pp collisions corresponding to a total integrated luminosity of 4.4 fb-1. An excess of Bs0→μ+μ- decays is observed with a significance of 7.8 standard deviations, representing the first observation of this decay in a single experiment. The branching fraction is measured to be B(Bs0→μ+μ-)=(3.0±0.6-0.2+0.3)×10-9, where the first uncertainty is statistical and the second systematic. The first measurement of the Bs0→μ+μ- effective lifetime, τ(Bs0→μ+μ-)=2.04±0.44±0.05 ps, is reported. No significant excess of B0→μ+μ- decays is found, and a 95% confidence level upper limit, B(B0→μ+μ-)<3.4×10-10, is determined. All results are in agreement with the standard model expectations.A search for the rare decays and is performed at the LHCb experiment using data collected in collisions corresponding to a total integrated luminosity of 4.4 fb. An excess of decays is observed with a significance of 7.8 standard deviations, representing the first observation of this decay in a single experiment. The branching fraction is measured to be , where the first uncertainty is statistical and the second systematic. The first measurement of the effective lifetime, ps, is reported. No significant excess of decays is found and a 95 % confidence level upper limit, , is determined. All results are in agreement with the Standard Model expectations
- …