Application of potassium, zinc and boron as potential plant growth modulators in Gossypium hirsutum L. under heat stress

High temperature stress at reproductive stages of cotton crop severely affects the yield and quality of cotton crop under changing climatic conditions. To alleviate the adverse effects of high temperature stress on cotton crop, the regulatory effects of potassium (K), zinc (Zn), and boron (B) were assessed by applying different temperature regimes at three reproductive stages of cotton crop under field and glass house conditions. Cotton plants were subjected to low (32/20 °C ± 2), medium (38/24 °C ± 2), and high (45/30 °C ± 2) temperatures under glasshouse, but sown at specific dates in field to provide different temperatures at three reproductive stages. High-temperature stress at squaring, flowering and boll formation stages in both field studies increased relative cell injury (RCI), total soluble proteins (TSP), reactive oxygen species and reduced fiber yield attributes i.e. total number of bolls per plant (TNBPP), number of sympodial branches per plant (NSBPP) and quality traits. For example, RCI, TNBPP and fiber fineness were reduced by 73%, 42% and 29%, respectively under supra thermal regime (SupTR) of glass house study over the optimal thermal regime (OpTR). Foliar application of K and Zn followed by B increased TSP, RWC, TNBPP, NSBPP, fiber fineness, fiber length and fiber strength. Further, foliar spray of K and Zn followed by B also reduced H2 O2 under SupTR and SubTR over the OpTR. The findings of the present study clearly demonstrate that foliar spray of Zn, K and B alleviated adverse effects of high temperature stress at squaring, flowering and boll formation stages and increased seed cotton yield and quality of cotton crop. © TÜBİTAK

Improved salinity tolerance in early growth stage of maize through salicylic acid foliar application

Soil salinity threatens agricultural production worldwide by constraining plant growth and final crop yield. The early stages are most sensitive to salinity, in response to which salicylic acid (SA) has demonstrated beneficial effects in various plant species. Based on this, a maize (Zea mays L.) pot experiment was set up combining three levels of soil salinity (0, 6 and 12 dS m–1), obtained through NaCl addition, with three levels of SA (0, 300 and 600 mM), applied by leaf spraying 20 days after seedling emergence. Fifteen days later, the following traits were assessed: morphology (plant height, leaf number), growth (root and shoot dry weight), leaf water status [relative water content (RWC), elec-trolyte leakage (EL)], pigments (chlorophyll a and b, carotenoids, anthocyanin), antioxidant enzymes (peroxidase, catalase, ascor-bate peroxidase, vitamin C), oxidative stress markers (H2O2, mal-ondialdehyde), osmo-regulating compounds (free amino acids, soluble proteins and sugars, proline), hormones [indole-3-acetic acid, gibberellic acid (GA), abscisic acid (ABA), ethylene], ele-ment (Na, K, Ca, Mg and Cl) concentration and content in roots, stem and leaves. Salinity severely affected maize growth (–26% total dry weight), impaired leaf water status (–31% RWC), reduced photosynthetic pigments, enhanced all antioxidant enzymes and oxidative stress markers, two osmo-regulating compounds (soluble sugars and proline) out of four, and all hormones except GA. SA was shown effective in containing most of the stress effects, while supporting plant defences by upgrading anti-oxidant activities (reduced oxidative stress markers), increasing cell membrane stability (–24% EL) and leaf water status (+20% RWC), and reducing plant stress signalling (–10% ABA and –20% ethylene). Above all, SA contrasted the massive entry of noxious ions (Na+ and Cl–), in favour of K+, Ca2+ and Mg2+ accumulation. Lastly, salicylic acid was shown beneficial for maize growth and physiology also under non-saline condition, suggesting a potential use in normal field conditions

Rendimento, estoque de carbono e dinâmica de preços das espécies de árvore agroflorestal no distrito de Mardan, Khyber Pakhtunkhwa, Paquistão

Abstract A socio-economic study was conducted in district Mardan of the Khyber Pakhtunkhwa (KP) province of Pakistan to get a comprehensive knowledge of the agroforestry tree species grown on the farmlands, their yield, and carbon stock. For yield and carbon stock estimation, data were collected from 59 sample plots by measuring the diameter, height, volume, and biomass of selected agroforestry tree species through D-tape and Haga altimeter. A total of 59 sample plots were inventoried using 2.5 percent sampling intensity. Each sample plot has an area of 0.5 ha, where each tree with a Diameter at Breast Height (DBH) ≥ 5 cm was inventoried. The calculated amount of volume of each tree species was then converted to biomass by multiplying it by the density of wood and the Biomass Expansion Factor (BEF). Total yield and C stock for the selected agroforestry tree species were 11535.2 metric tons and 2102.2 metric tons, respectively. Populus euroamericana is classified as the main tree with 28% growing stock prior to Morus alba by 21%, while Melia azedarach, Eucalyptus camaldulensis, Dalbergia sissoo, Acacia nilotica, Salix tetrasperma, and Bombax ceiba consist of 15%, 12%, 8%, 6%,7% and 3% growing stock respectively. Among the species found in different sampling plots the yield of Populus euroamericana was found to be 4747.5 metric tons and it was followed by the species Morus alba found at 2027.3 metric tons. Similarly, the volume for Melia azedarach, Eucalyptus camaldulensis, Dalbergia sissoo, Salix spp, Boombox ceiba, and Acacia nilotica was 1532.2 tons,1503 ton,745.7,203.5ton, 555.4ton and 220.5ton, respectively. The carbon stock for Populus euroamericana was calculated as 777.8 ton/ha, while for Eucalyptus camaldulensis, Melia azedarach, Morus alba, Dalbergia sissoo, Acacia nilotica, Salix species, and Bombax ceiba it was calculated as 312.3ton/ha, 272.1ton/ha, 363ton/ha, 245.1ton/ha, 51.4ton/ha, 27.3ton/ha and 53.2ton/ha, respectively. The questionnaire survey conducted for price dynamics showed that the majority of respondents purchase timber from the market for construction. But they use farm trees with low-quality city construction. They dislike using local timber in the conventional building as timber from farm trees is liable to insect attack. Rs. 50,000-100000, (33.33%) of daily sales was concluded from 50% of the trader while (16.7%) of the traders have their sales between Rs.150,000-200,000. Therefore, it is concluded by the authors that both provincial and federal government should promote agroforestry in Pakistan through different incentives because it has the potential to cope with dilemma of deforestation of natural forests and improve the livelihood of local peoples. It is strongly recommended that special projects just like the Ten Billion Tree Afforestation Project (T-BTTP) should be launched for agroforestry plantation and promotion in the country to sustain the ecological harmony and uplift the socio-economic condition of the peoples of Pakistan

Perceptions on the accessibility of Islamic banking in the UK—Challenges, opportunities and divergence in opinion

This study examines the views of UK-based Muslims, Islamic Scholars and Islamic banking employees on the current state of the latter industry, both in practical terms and as regards engagement with the nation’s large, but often marginalised Islamic community. The British Government has recently championed the Islamic banking sector and committed to supporting it as a means of addressing financial services needs and consolidating London’s position as the global centre for Islamic investment. The analysis adds to the substantive literature in two principal ways: (i) by contextualising the evidence via the notions of empowerment, engagement and social justice that underpin both the state’s attempts to foster growth and the central tenets of Islam; and (ii) by placing comparison of the opinions of key groups at the heart of the investigation. The findings reveal that while progress has been made, UK-based Muslims see several substantive impediments to access, including the complex terminology of Islamic banking products, the lack of internet banking facilities and branch networks as well as a generalised lack of interest in marketing on the part of the institutions. Whilst some coincidence of perception is evident, the views of bankers are shown to be out of line with those of the other parties in a number of key areas. For example, bankers appear to see less potential in the role of the internet as a medium for spreading awareness than do either potential customers or religious scholars. The paper therefore concludes with a call for multi-party Ijtihad and Qiyas (deductive analogy) that will encourage industrial outreach and, in so doing, support long-term growth

Inhibition of HCV 3a core gene through Silymarin and its fractions

Hepatitis C is a major health problem affecting 270 million individuals in world including Pakistan. Current treatment regimen, interferon alpha and ribavirin only cure half of patients due to side effects and high cost. In the present study Silybum marianum (Milk thistle) seeds were collected, extracted and analyzed against HCV 3a core gene by transiently transfecting the liver cells with HCV core plasmid. Our results demonstrated that Silymarin (SM) dose dependently inhibit the expression or function of HCV core gene at a non toxic concentration while the GAPDH remained constant. To identify the active ingredient, SM was fractioned by thin layer chromatography (TLC), column chromatography and HPLC. Purified fractions were tested for HCV core gene and western blotting results showed that two factions of SM (S1 and S2) inhibit HCV 3a core expression or function in liver cells Our results suggest SM and its fractions (S1 and S2) inhibit HCV core gene of 3a genotype and combination of SM and its fractions with interferon will be a better option to treat HCV infection

In-vitro model systems to study Hepatitis C Virus

Hepatitis C virus (HCV) is a major cause of chronic liver diseases including steatosis, cirrhosis and hepatocellular carcinoma. Currently, there is no vaccine available for prevention of HCV infection due to high degree of strain variation. The current treatment of care, Pegylated interferon α in combination with ribavirin is costly, has significant side effects and fails to cure about half of all infections. The development of in-vitro models such as HCV infection system, HCV sub-genomic replicon, HCV producing pseudoparticles (HCVpp) and infectious HCV virion provide an important tool to develop new antiviral drugs of different targets against HCV. These models also play an important role to study virus lifecycle such as virus entry, endocytosis, replication, release and HCV induced pathogenesis. This review summarizes the most important in-vitro models currently used to study future HCV research as well as drug design

Down-regulation of IRES containing 5'UTR of HCV genotype 3a using siRNAs

<p>Abstract</p> <p>Background</p> <p>Hepatitis C virus (HCV) is a major causative agent of liver associated diseases leading to the development of hepatocellular carcinoma (HCC) all over the world and genotype-3a responsible for most of the cases in Pakistan. Due to the limited efficiency of current chemotherapy of interferon-α (IFN-α) and ribavirin against HCV infection alternative options are desperately needed out of which the recently discovered RNAi represent a powerful silencing approach for molecular therapeutics through a sequence-specific RNA degradation process to silence virus infection or replication. HCV translation is mediated by a highly conserved internal ribosome entry site (IRES) within the 5'UTR region making it a relevant target for new drug development.</p> <p>Materials and methods</p> <p>The present study was proposed to assess and explore the possibility of HCV silencing using siRNA targeting 5'UTR. For this analysis full length HCV 5'UTR of HCV-3a (pCR3.1/5'UTR) was tagged with GFP protein for <it>in vitro </it>analysis in Huh-7 cells. siRNA targeting 5'UTR were designed, and tested against constructed vector in Huh-7 cell line both at RNA and Protein levels. Furthermore, the effect of these siRNAs was confirmed in HCV-3a serum infected Huh-7 cell line.</p> <p>Results</p> <p>The expression of 5'UTR-GFP was dramatically reduced both at mRNA and protein levels as compared with Mock transfected and control siRNAs treated cells using siRNAs against IRES of HCV-3a genotype. The potential of siRNAs specificity to inhibit HCV-3a replication in serum-infected Huh-7 cells was also investigated; upon treatment with siRNAs a significant decrease in HCV viral copy number and protein expression was observed.</p> <p>Conclusions</p> <p>Overall, the present work of siRNAs against HCV 5'UTR inhibits HCV-3a expression and represents effective future therapeutic opportunities against HCV-3a genotype.</p

Hepatitis B virus infection among different sex and age groups in Pakistani Punjab

<p>Abstract</p> <p>Background</p> <p>Hepatitis B virus (HBV) infection is a serious health problem in the developing countries including Pakistan. Various risk factors are responsible for the spread of this infectious disease. Prevalence of HBV infection in apparently suspected individual of Punjab province of Pakistan was analyzed during January 2008 to December 2010. Current study was aimed to investigate the epidemiology and risk factors of HBV infection.</p> <p>Methodology</p> <p>Four thousand eight hundred and ninety patients suffering from chronic liver disease were screened for the presence of HBV DNA using qualitative Real Time PCR methodology to confirm their status of infection. A predesigned standard questionnaire was filled for all the patients that included information about the possible risk factors.</p> <p>Results</p> <p>A total of 4890 ELISA positive patients were screened for Hepatitis B virus infection. Of these 3143 were positive for HBV, includes 68.15% males and 31.85% females. Male were observed to be more frequently infected as compared to the female with a positivity ratio of 2.14: 1. The rate of infection increases with the passage of time in the course of three years. Highest frequency of infection was found in the age of 21-30 was 34.93% followed by 23.83% in 31-40. Only (13.39%) were belonging to the age group 11-20 year. The rate of infection declines with increasing age as shown by age groups 41-50 (16.13%) and 51-60 (7.09%). While children aged 0-10 and very old >60 age groups were very less frequently 1.49% and 1.65% infected respectively. Important risk factors contributing to HBV spread include barber risk (23.60%), blood transfusion (4.04%), History of injection 26.19%, Reuse of syringes 26.60%, dental risk (11.20%) and surgical procedure (4.26%). Among the entire respondents trend sharing personal items was very common. History of injection, barber risk, surgery and dental procedure and reuse of syringes appear as major risk factors for the transmission.</p> <p>Conclusion</p> <p>Male were more frequently exposed to the risk factors as compared to female. Similarly the younger age group had high rate of infection as compared to the children's and the older age groups. Reuse of syringes', barber risk and History of injection were main risk identified during the present study. To lower HBV transmission rate Government should take aggressive steps towards massive awareness and vaccination programs to decrease the burden of HBV from the Punjab province of Pakistan.</p

Maximization of propylene in an industrial FCC unit

YesThe FCC riser cracks gas oil into useful fuels such as gasoline, diesel and some lighter products such as ethylene and propylene, which are major building blocks for the polyethylene and polypropylene production. The production objective of the riser is usually the maximization of gasoline and diesel, but it can also be to maximize propylene. The optimization and parameter estimation of a six-lumped catalytic cracking reaction of gas oil in FCC is carried out to maximize the yield of propylene using an optimisation framework developed in gPROMS software 5.0 by optimizing mass flow rates and temperatures of catalyst and gas oil. The optimal values of 290.8 kg/s mass flow rate of catalyst and 53.4 kg/s mass flow rate of gas oil were obtained as propylene yield is maximized to give 8.95 wt%. When compared with the base case simulation value of 4.59 wt% propylene yield, the maximized propylene yield is increased by 95%