422 research outputs found
Rapid formation of isoprene photo-oxidation products observed in Amazonia
Isoprene represents the single most important reactive hydrocarbon for atmospheric chemistry in the tropical atmosphere. It plays a central role in global and regional atmospheric chemistry and possible climate feedbacks. Photo-oxidation of primary hydrocarbons (e.g. isoprene) leads to the formation of oxygenated VOCs (OVOCs). The evolution of these intermediates affects the oxidative capacity of the atmosphere (by reacting with OH) and can contribute to secondary aerosol formation, a poorly understood process. An accurate and quantitative understanding of VOC oxidation processes is needed for model simulations of regional air quality and global climate. Based on field measurements conducted during the Amazonian Aerosol Characterization Experiment (AMAZE-08) we show that the production of certain OVOCs (e.g. hydroxyacetone) from isoprene photo-oxidation in the lower atmosphere is significantly underpredicted by standard chemistry schemes. Recently reported fast secondary production could explain 50% of the observed discrepancy with the remaining part possibly produced via a novel primary production channel, which has been proposed theoretically. The observations of OVOCs are also used to test a recently proposed HO<sub>x</sub> recycling mechanism via degradation of isoprene peroxy radicals. If generalized our observations suggest that prompt photochemical formation of OVOCs and other uncertainties in VOC oxidation schemes could result in uncertainties of modelled OH reactivity, potentially explaining a fraction of the missing OH sink over forests which has previously been largely attributed to a missing source of primary biogenic VOCs
Response of Soybean Insects to Foliar Applications of a Chitin Synthesis Inhibitor TH 6040
The activity of TH 6040, a chitin synthesis inhibitor, was determined against velvetbean caterpillar, Anticarsia gemmatalis Hübner, and other soybean defoliators in field tests in Georgia, South Carolina, and Brazil. Single applications at rates as low as 75 g AI/ha afforded adequate initial and excellent residual control of A. gemmatalis and some suppression of low populations of Plusia spp. Two applications at higher rates gave significant control of soybean looper, Pseudoplusia includens (Walker), and showed promise against green cloverworm, Plathypena scabra (F.), and Mexican bean beetle, Epilachna varivestis Mulsant. Populations of geocorids and nabids were lower in 1 test, possibly because of insecticidal activity, scarcity of prey, or both
Response of Soybean Insects to Foliar Applications of a Chitin Synthesis Inhibitor TH 6040
The activity of TH 6040, a chitin synthesis inhibitor, was determined against velvetbean caterpillar, Anticarsia gemmatalis Hübner, and other soybean defoliators in field tests in Georgia, South Carolina, and Brazil. Single applications at rates as low as 75 g AI/ha afforded adequate initial and excellent residual control of A. gemmatalis and some suppression of low populations of Plusia spp. Two applications at higher rates gave significant control of soybean looper, Pseudoplusia includens (Walker), and showed promise against green cloverworm, Plathypena scabra (F.), and Mexican bean beetle, Epilachna varivestis Mulsant. Populations of geocorids and nabids were lower in 1 test, possibly because of insecticidal activity, scarcity of prey, or both
MALTE - Model to predict new aerosol formation in the lower troposphere
The manuscript presents a detailed description of the meteorological and chemical code of Malte – a model to predict new aerosol formation in the lower troposphere. The aerosol dynamics are achieved by the new developed UHMA (University of Helsinki Multicomponent Aerosol Model) code with kinetic limited nucleation as responsible mechanism to form new clusters. First results indicate that the model is able to predict the on- and offset of new particle formation as well as the total aerosol number concentrations that were in good agreement with the observations. Further, comparison of predicted and measured H2SO4 concentrations showed a satisfactory agreement. The simulation results indicated that at a certain transitional particle diameter (2–7 nm), organic molecules can begin to contribute significantly to the growth rate compared to sulphuric acid. At even larger particle sizes, organic molecules can dominate the growth rate on days with significant monoterpene concentrations. The intraday vertical evolution of newly formed clusters and particles in two different size ranges resulted in two maxima at the ground. These particles grow around noon to the detectable size range and agree well with measured vertical profiles
Modeling and Measuring the Nocturnal Drainage Flow in a High-Elevation, Subalpine Forest with Complex Terrain
The nocturnal drainage flow of air causes significant uncertainty in ecosystem CO2, H2O, and energy budgets determined with the eddy covariance measurement approach. In this study, we examined the magnitude, nature, and dynamics of the nocturnal drainage flow in a subalpine forest ecosystem with complex terrain. We used an experimental approach involving four towers, each with vertical profiling of wind speed to measure the magnitude of drainage flows and dynamics in their occurrence. We developed an analytical drainage flow model, constrained with measurements of canopy structure and SF6 diffusion, to help us interpret the tower profile results. Model predictions were in good agreement with observed profiles of wind speed, leaf area density, and wind drag coefficient. Using theory, we showed that this one‐dimensional model is reduced to the widely used exponential wind profile model under conditions where vertical leaf area density and drag coefficient are uniformly distributed. We used the model for stability analysis, which predicted the presence of a very stable layer near the height of maximum leaf area density. This stable layer acts as a flow impediment, minimizing vertical dispersion between the subcanopy air space and the atmosphere above the canopy. The prediction is consistent with the results of SF6 diffusion observations that showed minimal vertical dispersion of nighttime, subcanopy drainage flows. The stable within‐canopy air layer coincided with the height of maximum wake‐to‐shear production ratio. We concluded that nighttime drainage flows are restricted to a relatively shallow layer of air beneath the canopy, with little vertical mixing across a relatively long horizontal fetch. Insight into the horizontal and vertical structure of the drainage flow is crucial for understanding the magnitude and dynamics of the mean advective CO2 flux that becomes significant during stable nighttime conditions and are typically missed during measurement of the turbulent CO2 flux. The model and interpretation provided in this study should lead to research strategies for the measurement of these advective fluxes and their inclusion in the overall mass balance for CO2 at this site with complex terrain
Insetos da soja no Brasil.
Insetos-pragas da soja; Inimigos naturais de insetos-pragas da soja; Importancia economica de especies-pragas da soja; Sistemas de manejo de insetos da soja.bitstream/item/77369/1/CNPSO-BOL.-TEC.-1-77.pd
New particle formation in the Front Range of the Colorado Rocky Mountains
New particle formation is of interest because of its influence on the properties of aerosol population, and due to the possible contribution of newly formed particles to cloud condensation nuclei. Currently no conclusive evidence exists as to the mechanism or mechanisms of nucleation and subsequent particle growth. However, nucleation rates exhibit a clear dependence on ambient sulphuric acid concentrations and particle growth is often attributed to the condensation of organic vapours. A detailed study of new particle formation in the Front Range of the Colorado Rocky Mountains is presented here. Gas and particle measurement data for 32 days was analyzed to identify event days, possible event days, and non-event days. A detailed analysis of nucleation and growth is provided for four days on which new particle formation was clearly observed. Evidence for the role of sesquiterpenes in new particle formation is presented
Portable ozone calibration source independent of changes in temperature, pressure and humidity for research and regulatory applications
A highly portable ozone (O3) calibration source that can serve as a U.S.
EPA level 4 transfer standard for the calibration of ozone analyzers is
described and evaluated with respect to analytical figures of merit and
effects of ambient pressure and humidity. Reproducible mixing ratios of ozone
are produced by the photolysis of oxygen in O3-scrubbed ambient air by
UV light at 184.9 nm light from a low-pressure mercury lamp. By maintaining a
constant volumetric flow rate (thus constant residence time within the
photolysis chamber), the mixing ratio produced is independent of both
pressure and temperature and can be varied by varying the lamp intensity.
Pulse width modulation of the lamp with feedback from a photodiode monitoring
the 253.7 nm emission line is used to maintain target ozone mixing ratios in
the range 30–1000 ppb. In order to provide a constant ratio of intensities
at 253.7 and 184.9 nm, the photolysis chamber containing the lamp is
regulated at a temperature of 40 °C. The resulting O3
calibrator has a response time for step changes in output ozone mixing ratio
of < 30 s and precision (σp) of 0.4 % of the output
mixing ratio for 10 s measurements (e.g., σp = ±0.4 ppb
for 100 ppb of O3). Ambient humidity was found to affect the output
mixing ratio of ozone primarily by dilution of the oxygen precursor. This
potential humidity interference could be up to a few percent in extreme cases
but is effectively removed by varying the lamp intensity to compensate for
the reduced oxygen concentration based on feedback from a humidity sensor.</p
First direct measurements of formaldehyde flux via eddy covariance: implications for missing in-canopy formaldehyde sources
We report the first observations of formaldehyde (HCHO) flux measured via eddy covariance, as well as HCHO concentrations and gradients, as observed by the Madison Fiber Laser-Induced Fluorescence Instrument during the BEACHON-ROCS 2010 campaign in a rural, Ponderosa Pine forest northwest of Colorado Springs, CO. A median noon upward flux of ~80 &mu;g m<sup>&minus;2</sup> h<sup>&minus;1</sup> (~24 ppt<sub>v</sub> m s<sup>&minus;1</sup>) was observed with a noon range of 37 to 131 &mu;g m<sup>&minus;2</sup> h<sup>&minus;1</sup>. Enclosure experiments were performed to determine the HCHO branch (3.5 &mu;g m<sup>-2</sup> h<sup>&minus;1</sup>) and soil (7.3 &mu;g m<sup>&minus;2</sup> h<sup>&minus;1</sup>) direct emission rates in the canopy. A zero-dimensional canopy box model, used to determine the apportionment of HCHO source and sink contributions to the flux, underpredicted the observed HCHO flux by a factor of 6. Simulated increases in concentrations of species similar to monoterpenes resulted in poor agreement with measurements, while simulated increases in direct HCHO emissions and/or concentrations of species similar to 2-methyl-3-buten-2-ol best improved model/measurement agreement. Given the typical diurnal variability of these BVOC emissions and direct HCHO emissions, this suggests that the source of the missing flux is a process with both a strong temperature and radiation dependence
Observations of glyoxal and formaldehyde as metrics for the anthropogenic impact on rural photochemistry
We present simultaneous fast, in-situ measurements of formaldehyde and glyoxal from two rural campaigns, BEARPEX 2009 and BEACHON-ROCS, both located in Pinus Ponderosa forests with emissions dominated by biogenic volatile organic compounds (VOCs). Despite considerable variability in the formaldehyde and glyoxal concentrations, the ratio of glyoxal to formaldehyde, R<sub>GF</sub>, displayed a very regular diurnal cycle over nearly 2 weeks of measurements. The only deviations in R<sub>GF</sub> were toward higher values and were the result of a biomass burning event during BEARPEX 2009 and very fresh anthropogenic influence during BEACHON-ROCS. Other rapid changes in glyoxal and formaldehyde concentrations have hardly any affect on R<sub>GF</sub> and could reflect transitions between low and high NO regimes. The trend of increased R<sub>GF</sub> from both anthropogenic reactive VOC mixtures and biomass burning compared to biogenic reactive VOC mixtures is robust due to the short timescales over which the observed changes in R<sub>GF</sub> occurred. Satellite retrievals, which suggest higher R<sub>GF</sub> for biogenic areas, are in contrast to our observed trends. It remains important to address this discrepancy, especially in view of the importance of satellite retrievals and in situ measurements for model comparison. In addition, we propose that R<sub>GF</sub> represents a useful metric for biogenic or anthropogenic reactive VOC mixtures and, in combination with absolute concentrations of glyoxal and formaldehyde, furthermore represents a useful metric for the extent of anthropogenic influence on overall reactive VOC processing via NO<sub>x</sub>. In particular, R<sub>GF</sub> yields information about not simply the VOCs dominating reactivity in an airmass, but the VOC processing itself that is directly coupled to ozone and secondary organic aerosol production
- …