Ion beam shaping and downsizing of nanostructures

We report a new approach for progressive and well-controlled downsizing of nanostructures below the 10 nm scale. Low energetic ion beam (Ar+) is used for gentle surface erosion, progressively shrinking the dimensions with ~ 1 nm accuracy. The method enables shaping of nanostructure geometry and polishing the surface. The process is clean room / high vacuum compatible being suitable for various applications. Apart from technological advantages, the method enables study of various size phenomena on the same sample between sessions of ion beam treatment.Comment: 14 pages, 6 figure

Magnetoplasmonic design rules for active magneto-optics

Light polarization rotators and non-reciprocal optical isolators are essential building blocks in photonics technology. These macroscopic passive devices are commonly based on magneto-optical Faraday and Kerr polarization rotation. Magnetoplasmonics - the combination of magnetism and plasmonics - is a promising route to bring these devices to the nanoscale. We introduce design rules for highly tunable active magnetoplasmonic elements in which we can tailor the amplitude and sign of the Kerr response over a broad spectral range

Cherenkov Gamma-Ray Telescopes: Past, Present, Future. The ALEGRO Project

A brief overview of the history of atmospheric Cherenkov gamma-ray telescopes is given. Topical problems of modern astrophysics and fundamental physics to be solved with these instruments are listed. The ALEGRO project of a low-threshold gamma-ray observatory is characterized in detail. The aim of this project is to examine cosmic gamma-ray sources (especially the rapidly variable gamma-ray sources, gamma-ray transients) with high statistics of detected photons in the energy range of 5-50 GeV

New data processing for SIMS

International audienc

In situ radiation test of silicon and diamond detectors operating in superfluid helium and developed for beam loss monitoring

As a result of the foreseen increase in the luminosity of the Large Hadron Collider, the discrimination between the collision products and possible magnet quench-provoking beam losses of the primary proton beams is becoming more critical for safe accelerator operation. We report the results of ongoing research efforts targeting the upgrading of the monitoring system by exploiting Beam Loss Monitor detectors based on semiconductors located as close as possible to the superconducting coils of the triplet magnets. In practice, this means that the detectors will have to be immersed in superfluid helium inside the cold mass and operate at 1.9 K. Additionally, the monitoring system is expected to survive 20 years of LHC operation, resulting in an estimated radiation fluence of 1×10 16 proton/cm 2 , which corresponds to a dose of about 2 MGy. In this study, we monitored the signal degradation during the in situ irradiation when silicon and single-crystal diamond detectors were situated in the liquid/superfluid helium and the dependences of the collected charge on fluence and bias voltage were obtained. It is shown that diamond and silicon detectors can operate at 1.9 K after 1×10 16 p/cm 2 irradiation required for application as BLMs, while the rate of the signal degradation was larger in silicon detectors than in the diamond ones. For Si detectors this rate was controlled mainly by the operational mode, being larger at forward bias voltage