1,658 research outputs found
Experimental study of contact transition control incorporating joint acceleration feedback
Joint acceleration and velocity feedbacks are incorporated into a classical internal force control of a robot in contact with the environment. This is intended to achieve a robust contact transition and force tracking performance for varying unknown environments, without any need of adjusting the controller parameters, A unified control structure is proposed for free motion, contact transition, and constrained motion in view of the consumption of the initial kinetic energy generated by a nonzero impact velocity. The influence of the velocity and acceleration feedbacks, which are introduced especially for suppressing the transition oscillation, on the postcontact tracking performance is discussed. Extensive experiments are conducted on the third joint of a three-link direct-drive robot to verify the proposed scheme for environments of various stiffnesses, including elastic (sponge), less elastic (cardboard), and hard (steel plate) surfaces. Results are compared with those obtained by the transition control scheme without the acceleration feedback. The ability of the proposed control scheme in resisting the force disturbance during the postcontact period is also experimentally investigated
Point trajectory planning of flexible redundant robot manipulators using genetic algorithms
The paper focuses on the problem of point-to-point trajectory planning for flexible redundant robot manipulators (FRM) in joint space. Compared with irredundant flexible manipulators, a FRM possesses additional possibilities during point-to-point trajectory planning due to its kinematics redundancy. A trajectory planning method to minimize vibration and/or executing time of a point-to-point motion is presented for FRMs based on Genetic Algorithms (GAs). Kinematics redundancy is integrated into the presented method as planning variables. Quadrinomial and quintic polynomial are used to describe the segments that connect the initial, intermediate, and final points in joint space. The trajectory planning of FRM is formulated as a problem of optimization with constraints. A planar FRM with three flexible links is used in simulation. Case studies show that the method is applicable
Remote surface inspection system
This paper reports on an on-going research and development effort in remote surface inspection of space platforms such as the Space Station Freedom (SSF). It describes the space environment and identifies the types of damage for which to search. This paper provides an overview of the Remote Surface Inspection System that was developed to conduct proof-of-concept demonstrations and to perform experiments in a laboratory environment. Specifically, the paper describes three technology areas: (1) manipulator control for sensor placement; (2) automated non-contact inspection to detect and classify flaws; and (3) an operator interface to command the system interactively and receive raw or processed sensor data. Initial findings for the automated and human visual inspection tests are reported
Software fault-tolerance by design diversity DEDIX: A tool for experiments
The use of multiple versions of a computer program, independently designed from a common specification, to reduce the effects of an error is discussed. If these versions are designed by independent programming teams, it is expected that a fault in one version will not have the same behavior as any fault in the other versions. Since the errors in the output of the versions are different and uncorrelated, it is possible to run the versions concurrently, cross-check their results at prespecified points, and mask errors. A DEsign DIversity eXperiments (DEDIX) testbed was implemented to study the influence of common mode errors which can result in a failure of the entire system. The layered design of DEDIX and its decision algorithm are described
Relationship between dietary intake and the development of type 2 diabetes in a Chinese population: The Hong Kong Dietary Survey
Objective To study the relationship between dietary intake and the development of type 2 diabetes among Chinese adults.Design A prospective cohort study. Dietary assessment was carried out using a validated FFQ. Principal component analysis was used to identify dietary patterns. Dietary glycaemic load and variety of snacks were also calculated.Setting A hospital-based centre at the Queen Mary Hospital in Hong Kong SAR, China.Subjects A total of 1010 Chinese adults aged 25-74 years who participated in a territory-wide dietary and cardiovascular risk factor prevalence survey in 1995-1996 were followed up for 9-14 years for the development of diabetes.Results A total of 690 (68·3 %) individuals completed follow-up during 2005-2008 and seventy-four cases of diabetes were identified over the follow-up period. Four dietary patterns were identified ('more snacks and drinks-, 'more vegetables, fruits and fish-, 'more meat and milk products- and 'more refined grains-). After adjustment for age, sex, BMI, waist-to-hip ratio, smoking, alcohol intake, participation in exercise/sports and family history of diabetes, the more vegetables, fruits and fish pattern was associated with a 14 % lower risk (OR per 1 sd increase in score = 0·76; 95 % CI 0·58, 0·99), whereas the more meat and milk products pattern was associated with a 39 % greater risk of diabetes (OR per 1 sd increase in score = 1·39; 95 % CI 1·04, 1·84). Dietary glycaemic load, rice intake, snack intake and variety of snacks were not independently associated with diabetes.Conclusions The more vegetables, fruits and fish pattern was associated with reduced risk and the more meat and milk products pattern was associated with an increased risk of diabetes. © 2011 The Authors.published_or_final_versio
Multiscale mechanisms of nutritionally induced property variation in spider silks.
Variability in spider major ampullate (MA) silk properties at different scales has proven difficult to determine and remains an obstacle to the development of synthetic fibers mimicking MA silk performance. A multitude of techniques may be used to measure multiscale aspects of silk properties. Here we fed five species of Araneoid spider solutions that either contained protein or were protein deprived and performed silk tensile tests, small and wide-angle X-ray scattering (SAXS/WAXS), amino acid composition analyses, and silk gene expression analyses, to resolve persistent questions about how nutrient deprivation induces variations in MA silk mechanical properties across scales. Our analyses found that the properties of each spider's silk varied differently in response to variations in their protein intake. We found changes in the crystalline and non-crystalline nanostructures to play specific roles in inducing the property variations we found. Across treatment MaSp expression patterns differed in each of the five species. We found that in most species MaSp expression and amino acid composition variations did not conform with our predictions based on a traditional MaSp expression model. In general, changes to the silk's alanine and proline compositions influenced the alignment of the proteins within the silk's amorphous region, which influenced silk extensibility and toughness. Variations in structural alignment in the crystalline and non-crystalline regions influenced ultimate strength independent of genetic expression. Our study provides the deepest insights thus far into the mechanisms of how MA silk properties vary from gene expression to nanostructure formations to fiber mechanics. Such knowledge is imperative for promoting the production of synthetic silk fibers
Frictional Coulomb drag in strong magnetic fields
A treatment of frictional Coulomb drag between two 2-dimensional electron
layers in a strong perpendicular magnetic field, within the independent
electron picture, is presented. Assuming fully resolved Landau levels, the
linear response theory expression for the transresistivity is
evaluated using diagrammatic techniques. The transresistivity is given by an
integral over energy and momentum transfer weighted by the product of the
screened interlayer interaction and the phase-space for scattering events. We
demonstrate, by a numerical analysis of the transresistivity, that for
well-resolved Landau levels the interplay between these two factors leads to
characteristic features in both the magnetic field- and the temperature
dependence of . Numerical results are compared with recent
experiments.Comment: RevTeX, 34 pages, 8 figures included in tex
Implementing Model-Based Variable-Structure Controllers For Robot Manipulators With Actuator Modelling
A model-based control scheme for robot manipulators
employing a variable structure control law has previously
been found to perform well
parameters are carefully chosen
model of this original scheme
which the actuator dynamics is taken into consider
The practical experiments are carried out on a commerci
revolute-joint robot manipulator
The UCLA Design Diversity Experiment (DEDIX) system: A distributed testbed for multiple-version software
To establish a long-term research facility for experimental investigations of design diversity as a means of achieving fault-tolerant systems, a distributed testbed for multiple-version software was designed. It is part of a local network, which utilizes the Locus distributed operating system to operate a set of 20 VAX 11/750 computers. It is used in experiments to measure the efficacy of design diversity and to investigate reliability increases under large-scale, controlled experimental conditions
- …