Studies on mineral dust using airborne lidar, ground-based remote sensing, and in situ instrumentation

© 2018 The Author(s). Published by EDP Sciences. This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).In August 2015, the AER-D campaign made use of the FAAM research aircraft based in Cape Verde, and targeted mineral dust. First results will be shown here. The campaign had multiple objectives: (1) lidar dust mapping for the validation of satellite and model products; (2) validation of sunphotometer remote sensing with airborne measurements; (3) coordinated measurements with the CATS lidar on the ISS; (4) radiative closure studies; and (5) the validation of a new model of dustsonde.Peer reviewe

Est-ce qu'une forme presque sphérique est "LE NOUVEAU NOIR" pour la fumée?

International audienceWe present smoke lidar measurements from the Canadian fires of 2017. The advected smoke layers over Europe are detected at both tropospheric and stratospheric heights, with the latter presenting non-typical values of the Linear Particle Depolarization Ratio (LPDR) with strong wavelength dependence from the UV to the Near-IR. Specifically, the LPDR values are of the order of 22, 18 and 4% at 355, 532 and 1064 nm respectively. In an attempt to interpret these results, we apply the hypothesis that smoke particles have near-spherical and/or more complicated shapes. Scattering calculations with the T-matrix code revealed that the near-spherical shape is able to reproduce the observed LPDR and LR values of the stratospheric smoke particles at the three measurement wavelengths.Nous présentons les mesures du lidar de fumée des incendies canadiens de 2017. Les couches de fumée advectées sur l'Europe sont détectées à la fois à des hauteurs troposphériques et stratosphériques, ces dernières présentant des valeurs atypiques du rapport de dépolarisation linéaire des particules (LPDR) avec une forte dépendance de longueur d'onde de l'UV au proche IR. Plus précisément, les valeurs LPDR sont de l'ordre de 22, 18 et 4% à 355, 532 et 1064 nm respectivement. Pour tenter d'interpréter ces résultats, nous appliquons l'hypothèse que les particules de fumée ont des formes quasi sphériques et/ou plus complexes. Les calculs de diffusion avec le code de la matrice T ont révélé que la forme quasi-sphérique est capable de reproduire les valeurs LPDR et LR observées des particules de fumée stratosphériques aux trois longueurs d'onde de mesure

IRGM variants and susceptibility to inflammatory bowel disease in the German population.

Genome-wide association studies identified the autophagy gene IRGM to be strongly associated with Crohn's disease (CD) but its impact in ulcerative colitis (UC), its phenotypic effects and potential epistatic interactions with other IBD susceptibility genes are less clear which we therefore analyzed in this study. Genomic DNA from 2060 individuals including 817 CD patients, 283 UC patients, and 961 healthy, unrelated controls (all of Caucasian origin) was analyzed for six IRGM single nucleotide polymorphisms (SNPs) (rs13371189, rs10065172 = p.Leu105Leu, rs4958847, rs1000113, rs11747270, rs931058). In all patients, a detailed genotype-phenotype analysis and testing for epistasis with the three major CD susceptibility genes NOD2, IL23R and ATG16L1 were performed. Our analysis revealed an association of the IRGM SNPs rs13371189 (p = 0.02, OR 1.31 [95% CI 1.05-1.65]), rs10065172 = p.Leu105Leu (p = 0.016, OR 1.33 [95% CI 1.06-1.66]) and rs1000113 (p = 0.047, OR 1.27 [95% CI 1.01-1.61]) with CD susceptibility. There was linkage disequilibrium between these three IRGM SNPs. In UC, several IRGM haplotypes were weakly associated with UC susceptibility (p<0.05). Genotype-phenotype analysis revealed no significant associations with a specific IBD phenotype or ileal CD involvement. There was evidence for weak gene-gene-interaction between several SNPs of the autophagy genes IRGM and ATG16L1 (p<0.05), which, however, did not remain significant after Bonferroni correction. Our results confirm IRGM as susceptibility gene for CD in the German population, supporting a role for the autophagy genes IRGM and ATG16L1 in the pathogenesis of CD

Retrieval of ice-nucleating particle concentrations from lidar observations and comparison with UAV in situ measurements

Aerosols that are efficient ice-nucleating particles (INPs) are crucial for the formation of cloud ice via heterogeneous nucleation in the atmosphere. The distribution of INPs on a large spatial scale and as a function of height determines their impact on clouds and climate. However, in situ measurements of INPs provide sparse coverage over space and time. A promising approach to address this gap is to retrieve INP concentration profiles by combining particle concentration profiles derived by lidar measurements with INP efficiency parameterizations for different freezing mechanisms (immersion freezing, deposition nucleation). Here, we assess the feasibility of this new method for both ground-based and spaceborne lidar measurements, using in situ observations collected with unmanned aerial vehicles (UAVs) and subsequently analyzed with the FRIDGE (FRankfurt Ice nucleation Deposition freezinG Experiment) INP counter from an experimental campaign at Cyprus in April 2016. Analyzing five case studies we calculated the cloud-relevant particle number concentrations using lidar measurements (n250,dry with an uncertainty of 20 % to 40 % and Sdry with an uncertainty of 30 % to 50 %), and we assessed the suitability of the different INP parameterizations with respect to the temperature range and the type of particles considered. Specifically, our analysis suggests that our calculations using the parameterization of Ullrich et al. (2017) (applicable for the temperature range −50 to −33 ∘C) agree within 1 order of magnitude with the in situ observations of nINP; thus, the parameterization of Ullrich et al. (2017) can efficiently address the deposition nucleation pathway in dust-dominated environments. Additionally, our calculations using the combination of the parameterizations of DeMott et al. (2015, 2010) (applicable for the temperature range −35 to −9 ∘C) agree within 2 orders of magnitude with the in situ observations of INP concentrations (nINP) and can thus efficiently address the immersion/condensation pathway of dust and nondust particles. The same conclusion is derived from the compilation of the parameterizations of DeMott et al. (2015) for dust and Ullrich et al. (2017) for soot.Peer reviewe

A First Case Study of CCN Concentrations from Spaceborne Lidar Observations

We present here the first cloud condensation nuclei (CCN) concentration profiles derived from measurements with the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) aboard the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), for different aerosol types at a supersaturation of 0.15%. CCN concentrations, along with the corresponding uncertainties, were inferred for a nighttime CALIPSO overpass on 9 September 2011, with coincident observations with the Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 research aircraft, within the framework of the Evaluation of CALIPSO’s Aerosol Classification scheme over Eastern Mediterranean (ACEMED) research campaign over Thessaloniki, Greece. The CALIPSO aerosol typing is evaluated, based on data from the Copernicus Atmosphere Monitoring Service (CAMS) reanalysis. Backward trajectories and satellite-based fire counts are used to examine the origin of air masses on that day. Our CCN retrievals are evaluated against particle number concentration retrievals at different height levels, based on the ACEMED airborne measurements and compared against CCN-related retrievals from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensors aboard Terra and Aqua product over Thessaloniki showing that it is feasible to obtain CCN concentrations from CALIPSO, with an uncertainty of a factor of two to three

Aerosol absorption profiling from the synergy of lidar and sun-photometry : The ACTRIS-2 campaigns in Germany, Greece and Cyprus

© The Authors, published by EDP Sciences. This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).Aerosol absorption profiling is crucial for radiative transfer calculations and climate modelling. Here, we utilize the synergy of lidar with sun-photometer measurements to derive the absorption coefficient and single scattering albedo profiles during the ACTRIS-2 campaigns held in Germany, Greece and Cyprus. The remote sensing techniques are compared with in situ measurements in order to harmonize and validate the different methodologies and reduce the absorption profiling uncertainties.Peer reviewe

Vertical profiles of aerosol mass concentration derived by unmanned airborne in situ and remote sensing instruments during dust events

In situ measurements using unmanned aerial vehicles (UAVs) and remote sensing observations can independently provide dense vertically resolved measurements of atmospheric aerosols, information which is strongly required in climate models. In both cases, inverting the recorded signals to useful information requires assumptions and constraints, and this can make the comparison of the results difficult. Here we compare, for the first time, vertical profiles of the aerosol mass concentration derived from light detection and ranging (lidar) observations and in situ measurements using an optical particle counter on board a UAV during moderate and weak Saharan dust episodes. Agreement between the two measurement methods was within experimental uncertainty for the coarse mode (i.e. particles having radii  > 0.5µm), where the properties of dust particles can be assumed with good accuracy. This result proves that the two techniques can be used interchangeably for determining the vertical profiles of aerosol concentrations, bringing them a step closer towards their systematic exploitation in climate models

Advancing the remote sensing of desert dust

The irregular shape of mineral dust provides a strong signature on active and passive polarimetric remote sensing observations. Nowadays, advanced lidar systems operating in the framework of ACTRIS are capable of providing quality assured, calibrated multi-wavelength linear particle depolarization ratio measurements, while new developments will provide us more polarimetric measurements in the near future. Passive polarimeters are already part of ACTRIS and their integration in operational algorithms is expected in the near future. This wealth of new information combined with updated scattering databases and sophisticated inversion schemes provide the means towards an improved characterization of desert dust in the future. We present here some examples from the ACTRIS journey on dust research during the last decade, aiming to demonstrate the progress on issues such as: (a) the discrimination of desert dust in external mixtures, (b) the separation and estimation of the fine and coarse particle modes, (c) the synergy of passive and active remote sensing for the derivation of dust concentration profiles, (d) the provision of dust-related CCN and IN particle concentrations for aerosol-cloud interaction studies, (e) the development of new scattering databases based on realistic particle shapes, (e) the application of these techniques on spaceborne lidar retrievals for the provision of global and regional climatological datasets. Future plans within ACTRIS for the evaluation and advancement of the methodologies and retrievals are also discussed, combined with new developments within the framework of the D-TECT ERC Grant

Modeling coarse and giant desert dust particles

Dust particles larger than 20 µm in diameter have been regularly observed to remain airborne during long-range transport. In this work, we modify the parameterization of the mineral dust cycle in the GOCART-AFWA dust scheme of WRFV4.2.1 to also include such coarse and giant particles, and we further discuss the underlying misrepresented physical mechanisms which hamper the model in reproducing adequately the transport of the coarse and giant mineral particles. The initial particle size distribution is constrained by observations over desert dust sources. Furthermore, the Stokes drag coefficient has been updated to account for realistic dust particle sizes (Re < 105). The new code was applied to simulate dust transport over Cabo Verde in August 2015 (AER-D campaign). Model results are evaluated against airborne dust measurements and the CALIPSO-LIVAS pure dust product. The results show that the modeled lifetimes of the coarser particles are shorter than those observed. Several sensitivity runs are performed by reducing artificially the particles' settling velocities in order to compensate underrepresented mechanisms, such as the non-spherical aerodynamics, in the relevant parameterization schemes. Our simulations reveal that particles with diameters of 5.5–17 and 40–100 µm are better represented under the assumption of an 80 % reduction in the settling velocity (UR80), while particles with sizes ranging between 17 and 40 µm are better represented in a 60 % reduction in settling velocity (UR60) scenario. The overall statistical analysis indicates that the best agreement with airborne in situ measurements downwind (Cabo Verde) is achieved with a 40 % reduction in settling velocity (UR40). Moreover, the UR80 experiment improves the representation of the vertical structure of the dust layers as those are captured by the CALIPSO-LIVAS vertically resolved pure dust observations. The current study highlights the necessity of upgrading the existing model parameterization schemes of the dust life-cycle components towards improving the assessment of the dust-related impacts within the Earth–atmosphere system

Geometrical and Microphysical Properties of Clouds Formed in the Presence of Dust above the Eastern Mediterranean

In this work, collocated lidar–radar observations are used to retrieve the vertical profiles of cloud properties above the Eastern Mediterranean. Measurements were performed in the framework of the PRE-TECT experiment during April 2017 at the Greek atmospheric observatory of Finokalia, Crete. Cloud geometrical and microphysical properties at different altitudes were derived using the Cloudnet target classification algorithm. We found that the variable atmospheric conditions that prevailed above the region during April 2017 resulted in complex cloud structures. Mid-level clouds were observed in 38% of the cases, high or convective clouds in 58% of the cases, and low-level clouds in 2% of the cases. From the observations of cloudy profiles, pure ice phase occurred in 94% of the cases, mixed-phase clouds were observed in 27% of the cases, and liquid clouds were observed in 8.7% of the cases, while Drizzle or rain occurred in 12% of the cases. The significant presence of Mixed-Phase Clouds was observed in all the clouds formed at the top of a dust layer, with three times higher abundance than the mean conditions (26% abundance at −15 °C). The low-level clouds were formed in the presence of sea salt and continental particles with ice abundance below 30%. The derived statistics on clouds’ high-resolution vertical distributions and thermodynamic phase can be combined with Cloudnet cloud products and lidar-retrieved aerosol properties to study aerosol-cloud interactions in this understudied region and evaluate microphysics parameterizations in numerical weather prediction and global climate models