1,036 research outputs found
A versatile microfadometer for lightfastness testing and pigment identification
The design and experimental method for the use of a novel instrument for lightfastness measurements on artwork is presented. The new microfadometer design offers increased durability and portability over the previous, published design, broadening the scope of locations at which data can be acquired. This reduces the need for art handling or transportation in order to gain evidence-based risk assessments for the display of light-sensitive artworks. The instrument focuses a stabilized high powered xenon lamp to a spot 0.25 millimeters (FWHM) while simultaneously monitoring color change. This makes it possible to identify pigments and determine the lightfastness of materials effectively and non-destructively. With 2.59mW or 0.82 lumens (1.7 x107 lux for a 0.25mm focused spot) the instrument is capable of fading Blue Wool 1 to a measured 11 ΔEab value (using CIE standard illuminant D65) in 15 minutes. The temperature increase created by focused radiation was measured to be 3 to 4°C above room temperature. The system was stable within 0.12 ΔEab over 1 hour and 0.31 ΔEab over 7 hours. A safety evaluation of the technique is discussed which concludes that some caution should be employed when fading smooth, uniform areas of artworks. The instrument can also incorporate a linear variable filter. This enables the researcher to identify the active wavebands that cause certain degradation reactions and determine the degree of wavelength dependence of fading. Some preliminary results of fading experiments on Prussian blue samples from the paint box of J. M. W Turner (1755-1851) are presented
Photochemical colour change for traditional watercolour pigments in low oxygen levels
An investigation for light exposure on pigments in low-oxygen environments (in the range 0–5% oxygen) was conducted using a purpose-built automated microfadometer for a large sample set including multiple samples of traditional watercolour pigments from nineteenth-century and twentieth-century sources, selected for concerns over their stability in anoxia. The pigments were prepared for usage in watercolour painting: ground and mixed in gum Arabic and applied to historically accurate gelatine glue-sized cotton and linen-based papers. Anoxia benefited many colorants and no colorant fared worse in anoxia than in air, with the exception of Prussian blue and Prussian green (which contains Prussian blue). A Prussian blue sampled from the studio materials of J.M.W. Turner (1775 − 1851) was microfaded in different environments (normal air (20.9% oxygen) 0, 1, 2, 3.5, or 5% oxygen in nitrogen) and the subsequent dark behaviour was measured. The behaviour of the sample (in normal air, anoxia, and 5% oxygen in nitrogen) proved to be consistent with the 55 separately sourced Prussian blue samples. When exposed to light in 5% oxygen in nitrogen, Prussian blue demonstrated the same light stability as in air (at approximately 21°C and 1 atmosphere). Storage in 5% oxygen is proposed for ‘anoxic’ display of paper-based artworks that might contain Prussian blue, to protect this material while reducing light-induced damage to other components of a watercolour, including organic colorants and the paper support
Recommended from our members
Development of portable microfading spectrometers for measurement of light sensitivity of materials
Microfading was originally designed for efficiently detecting extremely light-sensitive materials on objects in situ to determine the appropriate exhibition lighting conditions. By focusing an intense beam of light to a tiny submillimetre sized spot and simultaeously monitoring the colour change over time, the fading rate of the material can be measured without producing noticeable damage. The increased intensity of light allows rapid determination of light-fastness of materials. This paper examines an improved design of microfading spectrometer that is easy to assemble, compact, robust, capable of fully automatic acquisition of data with precision control of the fading time to produce higher precision measurements and to allow simultaneous monitoring of colour, spectral reflectance and other changes in real time. The effects of various parameters such as thickness and concentration of paint layer, the binding medium and substrate on the fading rates are examined for selected pigments and found that in certain cases substrates, binding media and thickness can affect the fading rate. Reciprocity in the context of microfading compared with realistic exhibition conditions is examined and found that it breaks down for some pigment
Factors affecting the practicality of solid-phase microextraction VOC analysis of artworks featuring polymeric materials in open environments
Currently there is no proven method for in-situ monitoring of the decay progression of objects featuring polymeric materials. One potential method which is gaining traction, is the analysis of volatile organic compounds (VOC) via solid phase microextraction gas chromatography mass spectrometry (SPME-GC/MS). Few studies have focused on repeated, long-term monitoring of objects in open heritage environments via SPME-GC/MS. Specifically, the combined effects on methodological performance of the fibre exposure time in conjunction with the effects of variable environmental conditions over that period and fibre location with relation to the object have yet to be investigated. In order to study these effects, we tracked four key VOCs emitted from Naum Gabo's constructivist sculpture Construction in Space ‘Two Cones’ (Tate) by repeated SPME-GC/MS analysis. Five fibres in total were placed around the object and within its storage room. Two separate experimental campaigns were carried out, one exposing the fibres to the object for 1 Day, the other for 7 days. Our results show that an exposure time of 7 Days led to a lower relative standard deviation than for a 1 Day exposure time for each of the four VOCs. However, our results also show that the performance of individual fibres, at their specific locations, was better with an exposure time of 1 Day. Furthermore, we highlight the comparability of the background VOC profile to a location within the object's storage crate.
The implications of our research are two-fold – firstly, when monitoring in an open environment, a shorter exposure time leads to more repeatable analysis over long time periods, however, it is at the expense of the ability to calculate concentrations as the fibre has not yet reached equilibrium. Secondly, background and object VOC profiles can be difficult to distinguish unless the fibre is in immediate vicinity of the point of interest
Are we overestimating the permanence of cellulose triacetate cinematographic films? A mathematical model for the vinegar syndrome
Among the earliest signs of degradation in cellulose triacetate cinematographic films is the generation of acetic acid due to hydrolytic deacetylation of the polymer, marked by an increase in the acidity of the films and emissions of acetic acid leading to a characteristic vinegar odour. We propose a mathematical model for predicting the onset of the vinegar syndrome which accounts for the autocatalytic effect of acetic acid on the deacetylation reaction. Model parameters are estimated from previously published experimental data from other research groups. These show free acidity changes in cellulose triacetate films subjected to accelerated ageing at temperatures of 70–100 °C. The model is validated against a different set of previously published experimental data of cellulose triacetate films aged at 21 °C and 35 °C, at 20, 35 and 50% relative humidity. The model demonstrates good quantitative agreement with the published experimental data. Predictions of film permanence at lower temperatures, similar to those present in the archives in which the films are typically stored, are made and compared with the predictions of film conservation guidelines. The results indicate that film permanence may be overestimated by existing guidelines, which do not account for autocatalysis in their modelling of the deacetylation rate. Our results suggest that cold storage, a common film conservation strategy, may be less effective at inhibiting degradation than previously thought. As cold storage typically requires film to be kept in confined spaces with limited air movement, conditions which promote autocatalysis, the inclusion of autocatalysis in our model is highly applicable to simulating this environment
Unveiling the importance of diffusion on the deterioration of cellulose acetate artefacts: The profile of plasticiser loss as assessed by infrared microscopy
Cellulose acetate (CA) artefacts are one of the
most valued plastic items in museum collections and are known to present stability issues,
with the loss of plasticiser being among the
main degradation processes. This study investigates the concentration distribution of diethyl
phthalate (DEP) plasticiser throughout the dimensions of CA using infrared microscopy for
the first time. Artificial ageing experiments using reference and historic CA plasticised with
DEP were performed to assess the change in the
concentration profiles as a function of ageing time. Our analysis indicates that the plasticiser
loss from CA artefacts is likely controlled by its
diffusion, resulting in a concentration gradient
in which lower plasticiser contents are observed
at the external layers of the material
Carboxyhaemoglobin levels and their determinants in older British men
Background: Although there has been concern about the levels of carbon monoxide exposure, particularly among older people, little is known about COHb levels and their determinants in the general population. We examined these issues in a study of older British men.Methods: Cross-sectional study of 4252 men aged 60-79 years selected from one socially representative general practice in each of 24 British towns and who attended for examination between 1998 and 2000. Blood samples were measured for COHb and information on social, household and individual factors assessed by questionnaire. Analyses were based on 3603 men measured in or close to (< 10 miles) their place of residence.Results: The COHb distribution was positively skewed. Geometric mean COHb level was 0.46% and the median 0.50%; 9.2% of men had a COHb level of 2.5% or more and 0.1% of subjects had a level of 7.5% or more. Factors which were independently related to mean COHb level included season (highest in autumn and winter), region (highest in Northern England), gas cooking (slight increase) and central heating (slight decrease) and active smoking, the strongest determinant. Mean COHb levels were more than ten times greater in men smoking more than 20 cigarettes a day (3.29%) compared with non-smokers (0.32%); almost all subjects with COHb levels of 2.5% and above were smokers (93%). Pipe and cigar smoking was associated with more modest increases in COHb level. Passive cigarette smoking exposure had no independent association with COHb after adjustment for other factors. Active smoking accounted for 41% of variance in COHb level and all factors together for 47%.Conclusion: An appreciable proportion of men have COHb levels of 2.5% or more at which symptomatic effects may occur, though very high levels are uncommon. The results confirm that smoking (particularly cigarette smoking) is the dominant influence on COHb levels
Characterisation of VOCs Surrounding Naum Gabo’s Construction in Space ‘Two Cones’, (Tate) by in situ SPME GC-MS Monitoring
Currently, there are few options for in situ non-destructive monitoring of the stability of modern polymeric materials within heritage collections. Past research has focused on exploiting the information contained in volatile organic compounds (VOCs) emitted from an object to understand decay mechanisms or identify the polymer composition (Lattuati-Derieux et al. 2013; Hakkarainen, Albertsson, and Karlsson 1997). The fundamental shortcoming of many previous studies utilising VOC capture is that often they use destructive analysis, elevated temperatures, artificially aged samples or combinations of these during analysis. While these studies have given us a wealth of information regarding decay profiles and key VOCs emitted from specific polymers, they often lack real-world applicability
Higgsing M2 to D2 with gravity: N=6 chiral supergravity from topologically gauged ABJM theory
We present the higgsing of three-dimensional N=6 superconformal ABJM type
theories coupled to conformal supergravity, so called topologically gauged ABJM
theory, thus providing a gravitational extension of previous work on the
relation between N M2 and N D2-branes. The resulting N=6 supergravity theory
appears at a chiral point similar to that of three-dimensional chiral gravity
introduced recently by Li, Song and Strominger, but with the opposite sign for
the Ricci scalar term in the lagrangian. We identify the supersymmetry in the
broken phase as a particular linear combination of the supersymmetry and
special conformal supersymmetry in the original topologically gauged ABJM
theory. We also discuss the higgsing procedure in detail paying special
attention to the role played by the U(1) factors in the original ABJM model and
the U(1) introduced in the topological gauging.Comment: 53 pages, Late
Poloxomer 188 Has a Deleterious Effect on Dystrophic Skeletal Muscle Function
Duchenne muscular dystrophy (DMD) is an X-linked, fatal muscle wasting disease for which there is currently no cure and limited palliative treatments. Poloxomer 188 (P188) is a tri-block copolymer that has been proposed as a potential treatment for cardiomyopathy in DMD patients. Despite the reported beneficial effects of P188 on dystrophic cardiac muscle function, the effects of P188 on dystrophic skeletal muscle function are relatively unknown. Mdx mice were injected intraperitoneally with 460 mg/kg or 30 mg/kg P188 dissolved in saline, or saline alone (control). The effect of single-dose and 2-week daily treatment was assessed using a muscle function test on the Tibialis Anterior (TA) muscle in situ in anaesthetised mice. The test comprises a warm up, measurement of the force-frequency relationship and a series of eccentric contractions with a 10% stretch that have previously been shown to cause a drop in maximum force in mdx mice. After 2 weeks of P188 treatment at either 30 or 460 mg/kg/day the drop in maximum force produced following eccentric contractions was significantly greater than that seen in saline treated control mice (P = 0.0001). Two week P188 treatment at either dose did not significantly change the force-frequency relationship or maximum isometric specific force produced by the TA muscle. In conclusion P188 treatment increases susceptibility to contraction-induced injury following eccentric contractions in dystrophic skeletal muscle and hence its suitability as a potential therapeutic for DMD should be reconsidered
- …