Superelastic behavior and elastocaloric effect in a Ni51.5Fe21.5Ga27.0 ferromagnetic shape memory single crystal under compression

Ni51.5Fe21.5Ga27.0 single crystals have been subjected to different heat treatments resulting in a different degree of L21 ordering. Superelastic response has been measured at different temperatures in compression mode. The mechanical behavior strongly depends on axis orientation. In the [001] direction, perfect superelasticity over a wide range of temperatures is found. For the [110] orientation, the material fails by brittle fracture short above austenite transformation finish temperature, Af. A linear dependence of the critical stress with temperature has been found in agreement with Clausius-Clapeyron equation. The slope does not significantly change with the degree of order, but it is notably affected by the crystal orientation. The microstructure of the samples after mechanical tests has been studied by transmission electron microscopy. The superelastic cycling produces dislocations with a Burgers vector that suggests local microplastic deformation of the martensitic phase. Finally, the adiabatic temperature change has been used to chacterize the elastocaloric effect in this alloy. The adiabatic cooling is found to be larger in the [110] than in the [001] orientation at 240 K. However, the brittleness of [110] samples avoid testing the adiabatic temperature change at room temperature. The adiabatic cooling in [001] orientation decreases systematically with temperature, which is related to decrease of the strain and entropy change of transformation

“Acute kidney injury in critically ill patients with COVID–19: The AKICOV multicenter study in Catalonia”

This study describes the incidence, evolution and prognosis of acute kidney injury (AKI) in critical COVID-19 during the first pandemic wave. We performed a prospective, observational, multicenter study of confirmed COVID-19 patients admitted to 19 intensive care units (ICUs) in Catalonia (Spain). Data regarding demographics, comorbidities, drug and medical treatment, physiological and laboratory results, AKI development, need for renal replacement therapy (RRT) and clinical outcomes were collected. Descriptive statistics and logistic regression analysis for AKI development and mortality were used. A total of 1,642 patients were enrolled (mean age 63 (15.95) years, 67.5% male). Mechanical ventilation (MV) was required for 80.8% and 64.4% of these patients, who were in prone position, while 67.7% received vasopressors. AKI at ICU admission was 28.4% and increased to 40.1% during ICU stay. A total of 172 (10.9%) patients required RRT, which represents 27.8% of the patients who developed AKI. AKI was more frequent in severe acute respiratory distress syndrome (ARDS) ARDS patients (68% vs 53.6%, p<0.001) and in MV patients (91.9% vs 77.7%, p<0.001), who required the prone position more frequently (74.8 vs 61%, p<0.001) and developed more infections. ICU and hospital mortality were increased in AKI patients (48.2% vs 17.7% and 51.1% vs 19%, p <0.001) respectively). AKI was an independent factor associated with mortality (IC 1.587-3.190). Mortality was higher in AKI patients who required RRT (55.8% vs 48.2%, p <0.04). Conclusions There is a high incidence of AKI in critically ill patients with COVID-19 disease and it is associated with higher mortality, increased organ failure, nosocomial infections and prolonged ICU stay

"Acute kidney injury in critically ill patients with COVID-19 : The AKICOV multicenter study in Catalonia"

This study describes the incidence, evolution and prognosis of acute kidney injury (AKI) in critical COVID-19 during the first pandemic wave. We performed a prospective, observational, multicenter study of confirmed COVID-19 patients admitted to 19 intensive care units (ICUs) in Catalonia (Spain). Data regarding demographics, comorbidities, drug and medical treatment, physiological and laboratory results, AKI development, need for renal replacement therapy (RRT) and clinical outcomes were collected. Descriptive statistics and logistic regression analysis for AKI development and mortality were used. A total of 1,642 patients were enrolled (mean age 63 (15.95) years, 67.5% male). Mechanical ventilation (MV) was required for 80.8% and 64.4% of these patients, who were in prone position, while 67.7% received vasopressors. AKI at ICU admission was 28.4% and increased to 40.1% during ICU stay. A total of 172 (10.9%) patients required RRT, which represents 27.8% of the patients who developed AKI. AKI was more frequent in severe acute respiratory distress syndrome (ARDS) ARDS patients (68% vs 53.6%, p<0.001) and in MV patients (91.9% vs 77.7%, p<0.001), who required the prone position more frequently (74.8 vs 61%, p<0.001) and developed more infections. ICU and hospital mortality were increased in AKI patients (48.2% vs 17.7% and 51.1% vs 19%, p <0.001) respectively). AKI was an independent factor associated with mortality (IC 1.587-3.190). Mortality was higher in AKI patients who required RRT (55.8% vs 48.2%, p <0.04). Conclusions There is a high incidence of AKI in critically ill patients with COVID-19 disease and it is associated with higher mortality, increased organ failure, nosocomial infections and prolonged ICU stay

Superelastic behavior and elastocaloric effect in a Ni51.5Fe21.5Ga27.0 ferromagnetic shape memory single crystal under compression

[eng] Ni51.5Fe21.5Ga27.0 single crystals have been subjected to different heat treatments resulting in a different degree of L21 ordering. Superelastic response has been measured at different temperatures in compression mode. The mechanical behavior strongly depends on axis orientation. In the [001] direction, perfect superelasticity over a wide range of temperatures is found. For the [110] orientation, the material fails by brittle fracture short above austenite transformation finish temperature, Af. A linear dependence of the critical stress with temperature has been found in agreement with Clausius-Clapeyron equation. The slope does not significantly change with the degree of order, but it is notably affected by the crystal orientation. The microstructure of the samples after mechanical tests has been studied by transmission electron microscopy. The superelastic cycling produces dislocations with a Burgers vector that suggests local microplastic deformation of the martensitic phase. Finally, the adiabatic temperature change has been used to chacterize the elastocaloric effect in this alloy. The adiabatic cooling is found to be larger in the [110] than in the [001] orientation at 240 K. However, the brittleness of [110] samples avoid testing the adiabatic temperature change at room temperature. The adiabatic cooling in [001] orientation decreases systematically with temperature, which is related to decrease of the strain and entropy change of transformation