51 research outputs found
Aerodynamic shape optimization of a low drag fairing for small livestock trailers
Small livestock trailers are commonly used to transport animals from farms to market
within the United Kingdom. Due to the bluff nature of these vehicles there is great potential
for reducing drag with a simple add-on fairing. This paper explores the feasibility of
combining high-fidelity aerodynamic analysis, accurate metamodeling, and efficient
optimization techniques to find an optimum fairing geometry which reduces drag, without
significantly impairing internal ventilation. Airflow simulations were carried out using
Computational Fluid Dynamics (CFD) to assess the performance of each fairing based on
three design variables. A Moving Least Squares (MLS) metamodel was built on a fifty-point
Optimal Latin Hypercube (OLH) Design of Experiments (DoE), where each point
represented a different geometry configuration. Traditional optimization techniques were
employed on the metamodel until an optimum geometrical configuration was found. This
optimum design was tested using CFD and it matched closely to the metamodel prediction.
Further, the drag reduction was measured at 14.4% on the trailer and 6.6% for the
combined truck and trailer
Implementation of Discrete Capability into the enhanced Multipoint Approximation Method for solving mixed integer-continuous optimization problems
Multipoint approximation method (MAM) focuses on the development of metamodels for the objective and constraint functions in solving a mid-range optimization problem within a trust region. To develop an optimization technique applicable to mixed integer-continuous design optimization problems in which the objective and constraint functions are computationally expensive and could be impossible to evaluate at some combinations of design variables, a simple and efficient algorithm, coordinate search, is implemented in the MAM. This discrete optimization capability is examined by the well established benchmark problem and its effectiveness is also evaluated as the discreteness interval for discrete design variables is increased from 0.2 to 1. Furthermore, an application to the optimization of a lattice composite fuselage structure where one of design variables (number of helical ribs) is integer is also presented to demonstrate the efficiency of this capability
A lamination parameter-based strategy for solving an integer-continuous problem arising in composite optimization
A bi-level optimization strategy for finding the optimal ply numbers and stacking sequence in composite structures has become one of the most popular techniques in recent years. When the optimization technique is based on the use of lamination parameters, the top level optimization has two subsets of design variables for each substructure (e.g., a panel in wing design): lamination parameters treated as continuous design variables, and three integers that define the number of plies of 0, 90 and ±45 orientation. When a continuous optimizer is used at the top level, there is a need for an algorithm to find an integer representation of the obtained continuous number of plies that, ideally, does not alter the mechanical performance of a panel. The focus of this paper is on solving the top level optimization problem whereas the description of local level optimization problem that arranges the stacking sequence can be found in the authors' previous work. In order to determine the integer values of the ply numbers, two schemes based on the lamination parameter matching are introduced in this paper. The strategy is to use a binary code controlling the integer representation of ply numbers in order to obtain a discrete number of plies of each orientation per composite panel. An optimization problem is formulated where the objective function (to be minimized) defines how close the lamination parameter values and the panel thickness, obtained in the top level optimization, are to their values when integer ply numbers are considered. Such an optimization problem is solved by a permutation GA for each individual panel. A wing box benchmark problem is used to demonstrate the potential of these methods
Transcriptomic and proteomic profiling of maize embryos exposed to camptothecin
<p>Abstract</p> <p>Background</p> <p>Camptothecin is a plant alkaloid that specifically binds topoisomerase I, inhibiting its activity and inducing double stranded breaks in DNA, activating the cell responses to DNA damage and, in response to severe treatments, triggering cell death.</p> <p>Results</p> <p>Comparative transcriptomic and proteomic analyses of maize embryos that had been exposed to camptothecin were conducted. Under the conditions used in this study, camptothecin did not induce extensive degradation in the genomic DNA but induced the transcription of genes involved in DNA repair and repressed genes involved in cell division. Camptothecin also affected the accumulation of several proteins involved in the stress response and induced the activity of certain calcium-dependent nucleases. We also detected changes in the expression and accumulation of different genes and proteins involved in post-translational regulatory processes.</p> <p>Conclusions</p> <p>This study identified several genes and proteins that participate in DNA damage responses in plants. Some of them may be involved in general responses to stress, but others are candidate genes for specific involvement in DNA repair. Our results open a number of new avenues for researching and improving plant resistance to DNA injury.</p
Bi-level optimization of blended composite panels
Two approaches are examined for finding the best stacking sequence of laminated composite wing structures with blending and manufacturing constraints: smeared stiffness-based method and lamination parameter-based method. In the first method, the material volume is the objective function at the global level and the stack shuffling to satisfy blending and manufacturing constraints is performed at the local level. The other method introduced in this paper is to use lamination parameters and numbers of plies of the pre-defined angles (0, 90, 45 and -45 degrees) as design variables with buckling, strength and ply percentage constraints while minimizing the material volume in the top level optimization run. Given lamination parameters from the top level optimization as targets for the local level, optimal stacking sequence is determined to satisfy the global blending requirements. On a benchmark problem of an 18-panel wing box, the results from these two approaches are compared to published results to demonstrate their potential
Two-scale EHL: three-dimensional topography in tilted-pad bearings
Derived from the Heterogeneous Multiscale Methods (HMM), a two-scale method is developed for the analysis of Elastohydrodynamic Lubrication (EHL) and micro-EHL in tilted-pad bearings with three-dimensional topography. A relationship linking the pressure gradient to mass flow rate is derived and represented in the bearing domain through homogenisation of near-periodic simulations describing the Fluid Structure Interaction (FSI) of topographical features. For the parameters investigated the influence of compressibility and piezoviscosity was found to be more significant than that of non-Newtonian (shear-thinning) behaviour on textured bearing performance. As the size of topography increased two-scale solutions demonstrated that at constant load the coefficient of friction increased and the minimum film thickness decreased over a range of pad lengths and tilt angles
Mid-Range Approximations in Sub-Spaces for MDO Problems with Disparate Discipline Attributes
Topology optimization of aircraft with non-conventional configurations
The optimal structural layouts of new aircraft configurations such as the flying wing and blended wing body (BWB) are not yet understood. These new configurations may require quite different design methods from those
used conventionally and one promising alternative that is attracting increasing levels of interest is topology optimization, an approach which is significantly different from conventional approaches and valuable in applications where there is little or no collective knowledge on what an optimal structure may be. This paper proposes a new approach for using topology optimization for developing conceptual designs of an aircraft's structural layout. Its aim is to overcome some of the problems associated with the inclusion of local displacement and buckling constraints. The approach is applied to the design of a BWB UAV’s wing and is shown to offer significant advantages over a baseline design
Design optimization of structural steelwork using a genetic algorithm, FEM and a system of design rules
- …