363 research outputs found
Conceptual mechanization studies for a horizon definition spacecraft attitude control subsystem, phase A, part II, 10 October 1966 - 29 May 1967
Attitude control subsystem for spin stabilized spacecraft for mapping earths infrared horizon radiance profiles in 15 micron carbon dioxide absorption ban
Generation of a wave packet tailored to efficient free space excitation of a single atom
We demonstrate the generation of an optical dipole wave suitable for the
process of efficiently coupling single quanta of light and matter in free
space. We employ a parabolic mirror for the conversion of a transverse beam
mode to a focused dipole wave and show the required spatial and temporal
shaping of the mode incident onto the mirror. The results include a proof of
principle correction of the parabolic mirror's aberrations. For the application
of exciting an atom with a single photon pulse we demonstrate the creation of a
suitable temporal pulse envelope. We infer coupling strengths of 89% and
success probabilities of up to 87% for the application of exciting a single
atom for the current experimental parameters.Comment: to be published in Europ. Phys. J.
Performance evaluation of turbulence-accentuated interchannel crosstalk for hybrid fibre and free-space optical wavelength-division-multiplexing systems using digital pulse-position modulation
A hybrid fibre and free-space optical communication link using digital pulse-position modulation (DPPM) in a wavelength-division-multiplexing system is proposed. Such a system, which could provide a power efficient, robust and flexible solution to high-speed access networks, is a contender for a passive optical network solution and could readily be deployed in areas with restrictions in optical fibre installation, or alternatively as a disaster recovery network. Interchannel crosstalk and atmospheric turbulence are major impairments in such a system and could combine in some cases to degrade the system. Both impairments are investigated here and the results are presented in the form of bit error probability, required optical transmission power and power penalties. Depending on the position of the interferer relative to the desired user, power penalties of about 0.2â3.0 dB for weak turbulence and above 20 dB for strong turbulence regimes are reported for bit error rate of 10â6. DPPM scheme with a coding level of 2 show about 2 dB improvements over onâoff-keying scheme
A Novel Tropically Stable Oral Amphotericin B Formulation (iCo-010) Exhibits Efficacy against Visceral Leishmaniasis in a Murine Model
Visceral leishmaniasis (VL) is a systemic form of a vector-borne parasitic disease caused by obligate intra-macrophage protozoa of the genus Leishmania. VL is always fatal in humans if left untreated and treatment options are limited. Amphotericin B (AmB), a polyene antibiotic, is the most active antileishmanial agent that currently exists. Liposomal AmB (AmBisome) is used as first-line treatment in developed countries [1], [7], [8], [9], [10]; however, the requisite parenteral administration and the high cost of the liposomal formulation prevents this treatment from reaching the majority of patients in developing nations [3]. A stable, efficacious oral treatment for VL that is able to withstand the rigors of tropical climates would overcome many of the current barriers to treatment that exist in countries with large VL-infected patient populations. In this study we have developed an oral formulation of AmB that is stable in tropical conditions and exhibits significant antileshimanial activity in mice
Carbenic nitrile imines: Properties and reactivity
Structures and properties of nitrile imines were investigated computationally at B3LYP and CCSD(T) levels. Whereas NBO analysis at the B3LYP DFT level invariably predicts a propargylic electronic structure, CCSD(T) calculations permit a clear distinction between propargylic, allenic, and carbenic structures. Nitrile imines with strong IR absorptions above ca. 2150 cm-1 have propargylic structures with a CN triple bond (RCNNSiMe 3 and R2BCNNBR2), and those with IR absorptions below ca. 2150 cm-1 are allenic (HCNNH, PhCNNH, and HCNNPh). Nitrile imines lacking significant cumulenic IR absorptions at 1900-2200 cm -1 are carbenic (R-(C:)-N=N-RâČ). Electronegative but lone pair-donating groups NR2, OR, and F stabilize the carbenic form of nitrile imines in the same way they stabilize "normal" singlet carbenes, including N-heterocyclic carbenes. NBO analyses at the CCSD(T) level confirm the classification into propargylic, allenic, and carbenic reactivity types. Carbenic nitrile imines are predicted to form azoketenes 21 with CO, to form [2+2] and [2+4] cycloadducts and borane adducts, and to cyclize to 1H-diazirenes of the type 24 in mildly exothermic reactions with activation energies in the range 29-38 kcal/mol. Such reactions will be readily accessible photochemically and thermally, e.g., under the conditions of matrix photolysis and flash vacuum thermolysis
Recommended from our members
Impact of natural gas extraction on PAH levels in ambient air
After publication the authors discovered a mistake in the air concentration calculations. PAH air concentrations reported in the original article are therefore incorrect. The calculation error resulted from using incorrect units of the ideal gas constant, and improper cell linkages in the spreadsheet used to adjust air concentrations for sampling temperature. Correcting this error changes air concentrations significantly relative to those reported in the published article. This correction also changes some of the conclusions reported in the original article.
Due to the impact of this correction on the reported findings, all authors retract the original article. The original article was published on March 26, 2015 and retracted on June 29, 2016.Natural gas extraction, often referred to as âfracking,â has increased rapidly in the U.S. in recent years. To address potential health impacts, passive air samplers were deployed in a rural community heavily affected by the natural gas boom. Samplers were analyzed for 62 polycyclic aromatic hydrocarbons (PAHs). Results were grouped based on distance from each sampler to the nearest active well. PAH levels were highest when samplers were closest to active wells. Additionally, PAH levels closest to natural gas activity were an order of magnitude higher than levels previously reported in rural areas. Sourcing ratios indicate that PAHs were predominantly petrogenic, suggesting that elevated PAH levels were influenced by direct releases from the earth. Quantitative human health risk assessment estimated the excess lifetime cancer risks associated with exposure to the measured PAHs. Closest to active wells, the risk estimated for maximum residential exposure was 2.9 in 10,000, which is above the U.S. EPAâs acceptable risk level. Overall, risk estimates decreased 30% when comparing results from samplers closest to active wells to those farthest. This work suggests that natural gas extraction may be contributing significantly to PAHs in air, at levels that are relevant to human health
Photon-Atom Coupling with Parabolic Mirrors
Efficient coupling of light to single atomic systems has gained considerable
attention over the past decades. This development is driven by the continuous
growth of quantum technologies. The efficient coupling of light and matter is
an enabling technology for quantum information processing and quantum
communication. And indeed, in recent years much progress has been made in this
direction. But applications aside, the interaction of photons and atoms is a
fundamental physics problem. There are various possibilities for making this
interaction more efficient, among them the apparently 'natural' attempt of
mode-matching the light field to the free-space emission pattern of the atomic
system of interest. Here we will describe the necessary steps of implementing
this mode-matching with the ultimate aim of reaching unit coupling efficiency.
We describe the use of deep parabolic mirrors as the central optical element of
a free-space coupling scheme, covering the preparation of suitable modes of the
field incident onto these mirrors as well as the location of an atom at the
mirror's focus. Furthermore, we establish a robust method for determining the
efficiency of the photon-atom coupling.Comment: Book chapter in compilation "Engineering the Atom-Photon Interaction"
published by Springer in 2015, edited by A. Predojevic and M. W. Mitchell,
ISBN 9783319192307, http://www.springer.com/gp/book/9783319192307. Only
change to version1: now with hyperlinks to arXiv eprints of other book
chapters mentioned in this on
Hip joint articular soft tissues of non-dinosaurian Dinosauromorpha and early Dinosauria: evolutionary and biomechanical implications for Saurischia
Dinosauromorphs evolved a wide diversity of hind limb skeletal morphologies, suggesting highly divergent articular soft tissue anatomies. However, poor preservation of articular soft tissues in fossils has hampered any follow-on functional inferences. We reconstruct the hip joint soft tissue anatomy of non-dinosaurian dinosauromorphs and early dinosaurs using osteological correlates derived from extant sauropsids and infer trends in character transitions along the theropod and sauropodomorph lineagues. Femora and pelves of 107 dinosauromorphs and outgroup taxa were digitized using 3D imaging techniques. Key transitions were estimated using maximum likelihood ancestral state reconstruction. The hips of dinosauromorphs possessed wide a disparity of soft tissue morphologies beyond the types and combinations exhibited by extant archosaurs. Early evolution of the dinosauriform hip joint was characterized by the retention of a prominent femoral hyaline cartilage cone in post-neonatal individuals, with the cartilage cone independently reduced within theropods and sauropodomorphs. The femur of Dinosauriformes possessed a fibrocartilage sleeve on the metaphysis, which surrounded a hyaline core. The acetabulum of Dinosauriformes possessed distinct labrum and antitrochanter structures. In sauropodomorphs, hip congruence was maintained by thick hyaline cartilage on the femoral head, whereas theropods relied on acetabular tissues such as ligaments and articular pads. In particular, the craniolaterally ossified hip capsule of non- Avetheropoda neotheropods permitted mostly parasagittal femoral movements. These data indicate that the dinosauromorph hip underwent mosaic evolution within the saurischian lineage and that sauropodomorphs and theropods underwent both convergence and divergence in articular soft tissues, correlated with transitions in body size, locomotor posture, and joint loading
The Bisketene Radical Cation and Its Formation by Oxidative Ring-Opening of Cyclobutenedione
- âŠ