Soft x-ray spectroscopy measurements of the p-like density of states of B in MgB2 and evidence for surface boron oxides on exposed surfaces

Soft X-ray absorption and fluorescence measurements are reported for the K-edge of B in MgB2. The measurements confirm a high density of B pxy(sigma)-states at the Fermi edge and extending to approximately 0.9 eV above the edge. A strong resonance is observed in elastic scattering through a core-exciton derived from out-of-plane pz(pi*)-states. Another strong resonance, observed in both elastic and inelastic spectra, is identified as a product of surface boron oxides.Comment: 7 pages total, 4 figures, submitted to Phys. Rev. Let

Towards an engineering model for curve squeal

Curve squeal is a strong tonal noise that may arise when a railway vehicle negotiates a curve. The wheel/rail contact model is the central part of prediction models, describing the frictional instability occurring in the contact during squeal. A previously developed time-domain squeal model considers the wheel and rail dynamics, and the wheel/rail contact is solved using Kalker’s nonlinear transient CONTACT algorithm with Coulomb friction. In this paper, contact models with different degree of simplification are compared to CONTACT within the previously developed squeal model in order to determine a suitable contact algorithm for an engineering curve squeal model. Kalker’s steady-state FASTSIM is evaluated, and, without further modification, shows unsatisfying results. An alternative transient single-point contact algorithm named SPOINT is formulated with the friction model derived from CONTACT. Comparing with the original model results, the SPOINT implementation results are promising and similar to results from CONTACT

Effect of continuum couplings in fusion of halo 11^{11}Be on 208^{208}Pb around the Coulomb barrier

The effect of continuum couplings in the fusion of the halo nucleus $^{11}$Be on $^{208}$Pb around the Coulomb barrier is studied using a three-body model within a coupled discretised continuum channels (CDCC) formalism. We investigate in particular the role of continuum-continuum couplings. These are found to hinder total, complete and incomplete fusion processes. Couplings to the projectile $1p_{1/2}$ bound excited state redistribute the complete and incomplete fusion cross sections, but the total fusion cross section remains nearly constant. Results show that continuum-continuum couplings enhance the irreversibility of breakup and reduce the flux that penetrates the Coulomb barrier. Converged total fusion cross sections agree with the experimental ones for energies around the Coulomb barrier, but underestimate those for energies well above the Coulomb barrier.Comment: 15 pages, 7 figures, accepted in Phys. Rev.

Elite male Flat jockeys display lower bone density and lower resting metabolic rate than their female counterparts: implications for athlete welfare

To test the hypothesis that daily weight-making is more problematic to health in male compared with female jockeys, we compared the bone-density and resting metabolic rate (RMR) in weight-matched male and female Flat-jockeys. RMR (kcal.kg-1 lean mass) was lower in males compared with females as well as lower bone-density Z-scores at the hip and lumbar spine. Data suggest the lifestyle of male jockeys’ compromise health more severely than females, possibly due to making-weight more frequently

Influence of Hydrodynamic Interactions on the Adsorption Process of Large Particles

We have studied the adsorption process of non-Brownian particles on a line incorporating hydrodynamic interactionsa and we have numerically analyzed their effect on typical relevant quantities. We compare our model to the ballistic deposition model (BM) and address the limitations of BM in experimental situations. The results obtained can explain some differences observed between recent experiments and BM predictions.Comment: 10 pages, LaTeX. 4 Figures upon reques

Model of correlated sequential adsorption of colloidal particles

We present results of a new model of sequential adsorption in which the adsorbing particles are correlated with the particles attached to the substrate. The strength of the correlations is measured by a tunable parameter $\sigma$. The model interpolates between free ballistic adsorption in the limit $\sigma\to\infty$ and a strongly correlated phase, appearing for $\sigma\to0$ and characterized by the emergence of highly ordered structures. The phenomenon is manifested through the analysis of several magnitudes, as the jamming limit and the particle-particle correlation function. The effect of correlations in one dimension manifests in the increased tendency to particle chaining in the substrate. In two dimensions the correlations induce a percolation transition, in which a spanning cluster of connected particles appears at a certain critical value $\sigma_c$. Our study could be applicable to more general situations in which the coupling between correlations and disorder is relevant, as for example, in the presence of strong interparticle interactions.Comment: 6 pages, 8 EPS figures. Phys. Rev. E (in press

Laser spectroscopy of hyperfine structure in highly-charged ions: a test of QED at high fields

An overview is presented of laser spectroscopy experiments with cold, trapped, highly-charged ions, which will be performed at the HITRAP facility at GSI in Darmstadt (Germany). These high-resolution measurements of ground state hyperfine splittings will be three orders of magnitude more precise than previous measurements. Moreover, from a comparison of measurements of the hyperfine splittings in hydrogen- and lithium-like ions of the same isotope, QED effects at high electromagnetic fields can be determined within a few percent. Several candidate ions suited for these laser spectroscopy studies are presented.Comment: 5 pages, 1 figure, 1 table. accepted for Canadian Journal of Physics (2006

Electron Spin Resonance Above Tc In Layered Manganites

We have performed electron spin resonance (ESR) and dc magnetization measurements on single crystals of La2(1-x)Sr1+2xMn2O7 up to 800 K with special emphasis on the x = 0.4 composition. The ESR linewidth shows behavior similar to that observed in the three-dimensional perovskites and above ∼500 K can be described by a universal expression ΔHpp(T)=[C/Tχ(T)]ΔHpp (∞). The linewidth and the resonance field become anisotropic below ∼500 K. The anisotropy in the resonance field is proportional to the magnetization M, and we concluded that it is intrinsic to the system. We show that demagnetization effects can explain only part of the anisotropy. The remainder arises from short-range uniaxial terms in the Hamiltonian that are associated with the crystal field and Dzialozhinsky-Moriya interactions. The anisotropy in the linewidth is attributed to the easy-plane ferromagnetic ordering, which also arises from the short-range anisotropy.631717441311744136Ruddlesden, S.N., Popper, P., (1958) Acta Crystallogr., 11, p. 54Moritomo, Y., Asamitsu, A., Kuwahara, H., Tokura, Y., (1996) Nature (London), 380, p. 141Causa, M.T., Tovar, M., Caneiro, A., Prado, F., Ibanez, G., Ramos, C.A., Butera, A., Oseroff, S.B., (1998) Phys. Rev. B, 58, p. 3233Causa, M.T., Alejandro, G., Tovar, M., Pagliuso, P.G., Rettori, C., Oseroff, S.B., Subramanian, M.A., (1999) J. Appl. Phys., 85, p. 5408Huber, D.L., Alejandro, G., Caneiro, A., Causa, M.T., Prado, F., Tovar, M., Oseroff, S.B., (1999) Phys. Rev. B, 60, p. 12155Oseroff, S.B., Moreno, N.O., Pagliuso, P.G., Rettori, C., Huber, D.L., Gardner, J.S., Sarrao, J.L., Alascio, B.R., (2000) J. Appl. Phys., 87, p. 5810Seehra, M.S., Ibrahim, M.M., Babu, V.S., Srinivasan, G., (1996) J. Phys.: Condens. Matter, 8, p. 11283Dominguez, M., Lofland, S.E., Bhagat, S.M., Raychaudhuri, A.K., Ju, H.L., Venkates, T., Greene, R.L., (1996) Solid State Commun., 97, p. 193Lofland, S.E., Kim, P., Dahiroc, P., Bhagat, S.M., Tyagi, S.D., Karabashev, S.G., Shultyatev, D.A., Mukovskii, Y., (1997) Phys. Lett. A, 233, p. 476Kimura, T., Tomioka, Y., Kuwahara, H., Asamitsu, A., Tamura, M., Tokura, Y., (1996) Science, 274, p. 1698Perring, T.G., Aeppli, G., Moritomo, Y., Tokura, Y., (1997) Phys. Rev. Lett., 78, p. 3197Zhou, J.-S., Goodenough, J.B., Mitchell, J.F., (1998) Phys. Rev. B, 58, p. 579Zhou, J.-S., Goodenough, J.B., (1998) Phys. Rev. Lett., 80, p. 2665Kelley, T.M., Argyriou, D.N., Robinson, R.A., Nakotte, H., Mitchell, J.F., Osbron, R., Jorgensen, J.D., (1998) Physica B, 241-243, p. 439Heffner, R.H., MacLaughlin, D.E., Nieuwenhuys, G.J., Kimura, T., Luke, G.M., Tokura, Y., Uemura, Y.J., (1998) Phys. Rev. Lett., 81, p. 1706Potter, C.D., Swiatek, M., Bader, S.D., Argyriou, D.N., Mitchell, J.F., Miller, D.J., Hinks, D.G., Jorgensen, J.D., (1998) Phys. Rev. B, 57, p. 72Chauvet, O., Goglio, G., Molinie, P., Corraze, B., Brohan, L., (1998) Phys. Rev. Lett., 81, p. 1102Hirota, K., Moritomo, Y., Fujioka, H., Kubota, M., Yoshizawa, H., Endoh, Y., (1998) J. Phys. Soc. Jpn., 67, p. 3380Li, J.Q., Matsui, Y., Kimura, T., Tokura, Y., (1998) Phys. Rev. B, 57, pp. R3205Kimura, T., Kumai, R., Tokura, Y., Li, J.Q., Matsui, Y., (1998) Phys. Rev. B, 58, p. 11081Hayashi, T., Miura, N., Tokunaga, M., Kimura, T., Tokura, Y., (1998) J. Phys.: Condens. Matter, 10, p. 11525Suryanarayanan, R., Dhalenne, G., Revcolevschi, A., Prellier, W., Renard, J.P., Dupas, C., Caliebe, W., Chatterji, T., (2000) Solid State Commun., 113, p. 267Kubota, M., Fujioka, H., Ohoyama, K., Hirota, K., Moritomo, Y., Yoshizawa, H., Endoh, Y., (1999) J. Phys. Chem. Solids, 60, p. 116Bhagat, S.M., Lofland, S.E., Mitchell, J.F., (1999) Phys. Lett. A, 259, p. 326Kittel, C., (1997) Introduction to Solid State Physics, , Wiley, New YorkOkochi, M., (1970) J. Phys. Soc. Jpn., 28, p. 897Victoria, C., Barker, R.C., Yelon, A., (1967) Phys. Rev. Lett., 19, p. 792Nagata, K., (1976) J. Phys. Soc. Jpn., 40, p. 1209Nagata, K., Yamamoto, I., Takano, H., Yokozawa, Y., (1977) J. Phys. Soc. Jpn., 43, p. 857. , and references thereinHuber, D.L., Seehra, M.S., (1976) Phys. Status Solidi B, 74, p. 145Stanger, J.-L., Andre, J.-J., Turek, P., Hosokoshi, Y., Tamura, M., Kinoshita, M., Rey, P., Veciana, J., (1997) Phys. Rev. B, 55, p. 8398Van Vleck, J.H., (1950) Phys. Rev., 78, p. 266Kittel, C., (1948) Phys. Rev., 73, p. 15

Soft-core baryon-baryon potentials for the complete baryon octet

SU(3) symmetry relations on the recently constructed hyperon-nucleon potentials are used to develop potential models for all possible baryon-baryon interaction channels. The main focus is on the interaction channels with total strangeness S=-2, -3, and -4, for which no experimental data exist yet. The potential models for these channels are based on SU(3) extensions of potential models for the S=0 and S=-1 sectors, which are fitted to experimental data. Although the SU(3) symmetry is not taken to be exact, the S=0 and S=-1 sectors still provide the necessary constraints to fix all free parameters. The potentials for the S=-2, -3, and -4 sectors, therefore, do not contain any additional free parameters, which makes them the first models of this kind. Various properties of the potentials are illustrated by giving results for scattering lengths, bound states, and total cross sections.Comment: 22 pages RevTex, 6 postscript figure

Modelling of railway curve squeal including effects of wheel rotation

Railway vehicles negotiating tight curves may emit an intense high-pitch noise. The underlying mechanisms of this squeal noise are still a subject of research. Simulation models are complex since they have to consider the non-linear, transient and high-frequency interaction between wheel and rail. Often simplified models are used for wheel and rail to reduce computational effort, which involves the risk of oversimplifications. This paper focuses on the importance to include a rotating wheel instead of a stationary wheel in the simulation models. Two formulations for a rotating wheel are implemented in a previously published wheel/rail interaction model: a realistic model based on an Eulerian modal coordinate approach and a simplified model based on a rotating load and moving Green's functions. The simulation results for different friction coefficients and values of lateral creepage are compared with results obtained for the stationary wheel. Both approaches for the rotating wheel give almost identical results for the rolling speed considered. Furthermore, it can be concluded that a model of a stationary flexible wheel is sufficient to simulate curve squeal