1,445 research outputs found
A novel method to determine buffer strip effectiveness on deep soils
Unfertilized buffer strips (BS) generally improve surface water quality. High buffer strip effectiveness (BSE) has been reported for sloping shallow aquifers, but experimental data for plain landscapes with deeply permeable soils is lacking. We tested a novel method to determine BSE on a 20-m-deep, permeable sandy soil. Discharge from soil to ditch was temporarily collected in an in-stream reservoir to measure its quantity and quality, both for a BS and a reference (REF) treatment. Treatments were replicated once for the first, and three times for the next three leaching seasons. No significant BSE was obtained for nitrogen and phosphorus species in the reservoirs. Additionally, water samples were taken from the upper groundwater below the treatments. The effect of BS for nitrate was much bigger in upper groundwater than in the reservoirs that also collected groundwater from greater depths that were not influenced by the treatments. We conclude that measuring changes in upper groundwater to assess BSE is only valid under specific hydrogeological conditions. We propose an alternative experimental set-up for future research, including extra measurements before installing the BS and REF treatments to deal with spatial and temporal variability. The use of such data as covariates will increase the power of statistical tests by decreasing between-reservoir variability
Graphene on Rh(111): STM and AFM studies
The electronic and crystallographic structure of the graphene/Rh(111) moir\'e
lattice is studied via combination of density-functional theory calculations
and scanning tunneling and atomic force microscopy (STM and AFM). Whereas the
principal contrast between hills and valleys observed in STM does not depend on
the sign of applied bias voltage, the contrast in atomically resolved AFM
images strongly depends on the frequency shift of the oscillating AFM tip. The
obtained results demonstrate the perspectives of application atomic force
microscopy/spectroscopy for the probing of the chemical contrast at the
surface.Comment: manuscript and supplementary information; submitted to Appl. Phys.
Lett. on 01.03.201
Electronic structure, imaging contrast and chemical reactivity of graphene moir\'e on metals
Realization of graphene moir\'e superstructures on the surface of 4d and 5d
transition metals offers templates with periodically modulated electron
density, which is responsible for a number of fascinating effects, including
the formation of quantum dots and the site selective adsorption of organic
molecules or metal clusters on graphene. Here, applying the combination of
scanning probe microscopy/spectroscopy and the density functional theory
calculations, we gain a profound insight into the electronic and topographic
contributions to the imaging contrast of the epitaxial graphene/Ir(111) system.
We show directly that in STM imaging the electronic contribution is prevailing
compared to the topographic one. In the force microscopy and spectroscopy
experiments we observe a variation of the interaction strength between the tip
and high-symmetry places within the graphene moir\'e supercell, which determine
the adsorption cites for molecules or metal clusters on graphene/Ir(111).Comment: submitted on Sep, 6th 201
Near ambient pressure-x-ray photoelectron spectroscopy spectra of lithium bis (trifluoromethane-sulfonyl) imide in propylene carbonate
Near ambient pressure-x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at greater than 5000 Pa. NAP-XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show the survey, Li 1s, S 2p, C 1s, N 1s, O 1s, and F 1s NAP-XPS spectra of a Li-based electrolyte solution, which is a material that would be difficult to analyze by conventional XPS. The measurements were performed at 200 Pa in ambient gas atmosphere to compensate for surface charging. Peak fits of the C 1s, O 1s, and F 1s narrow scans are presented
Surface grafting of electrospun fibers using ATRP and RAFT for the control of biointerfacial interactions
BACKGROUND The ability to present signalling molecules within a low fouling 3D environment that mimics the extracellular matrix is an important goal for a range of biomedical applications, both in vitro and in vivo. Cell responses can be triggered by non-specific protein interactions occurring on the surface of a biomaterial, which is an undesirable process when studying specific receptor-ligand interactions. It is therefore useful to present specific ligands of interest to cell surface receptors in a 3D environment that minimizes non-specific interactions with biomolecules, such as proteins. METHOD In this study, surface-initiated atom transfer radical polymerization (SI-ATRP) of poly(ethylene glycol)-based monomers was carried out from the surface of electrospun fibers composed of a styrene/vinylbenzyl chloride copolymer. Surface initiated radical addition-fragmentation chain transfer (SI-RAFT) polymerisation was also carried out to generate bottle brush copolymer coatings consisting of poly(acrylic acid) and poly(acrylamide). These were grown from surface trithiocarbonate groups generated from the chloromethyl styrene moieties existing in the original synthesised polymer. XPS was used to characterise the surface composition of the fibers after grafting and after coupling with fluorine functional XPS labels. RESULTS Bottle brush type coatings were able to be produced by ATRP which consisted of poly(ethylene glycol) methacrylate and a terminal alkyne-functionalised monomer. The ATRP coatings showed reduced non-specific protein adsorption, as a result of effective PEG incorporation and pendant alkynes groups existing as part of the brushes allowed for further conjugation of via azide-alkyne Huisgen 1,3-dipolar cycloaddition. In the case of RAFT, carboxylic acid moieties were effectively coupled to an amine label via amide bond formation. In each case XPS analysis demonstrated that covalent immobilisation had effectively taken place. CONCLUSION Overall, the studies presented an effective platform for the preparation of 3D scaffolds which contain effective conjugation sites for attachment of specific bioactive signals of interest, as well as actively reducing non-specific protein interactions.This research was supported by the Cooperative Research Centre for
Polymers (CRCP)
Supporting smoking cessation in older patients: a continuing challenge for community nurses
Tobacco smoking continues to pose negative health consequences for smokers and their families, and is the single greatest cause of health inequalities in the UK. Older people are particularly vulnerable to the negative health impacts of smoking and therefore, supporting older smokers to quit remains an important public health goal. Community nurses are required to help patients to lead healthier lifestyles and have ideal opportunities to encourage smoking cessation in older people who are affected by smoking-related health conditions, or whose existing conditions may be exacerbated by continued smoking. This paper discusses how community nurses can support their older patients to quit smoking by fostering a patient-centred partnership through good communication and empathy. The newly developed ‘Very Brief Advice on Smoking’ (VBA) interventions can provide a useful tool for community nurses who experience time constraints to advise older people that psychosocial support with treatment is the most effective method of smoking cessation, while respecting the health decisions of patients
Psychometric Evaluation and Design of Patient-Centered Communication Measures for Cancer Care Settings
Objective
To evaluate the psychometric properties of questions that assess patient perceptions of patient-provider communication and design measures of patient-centered communication (PCC). Methods
Participants (adults with colon or rectal cancer living in North Carolina) completed a survey at 2 to 3 months post-diagnosis. The survey included 87 questions in six PCC Functions: Exchanging Information, Fostering Health Relationships, Making Decisions, Responding to Emotions, Enabling Patient Self-Management, and Managing Uncertainty. For each Function we conducted factor analyses, item response theory modeling, and tests for differential item functioning, and assessed reliability and construct validity. Results
Participants included 501 respondents; 46% had a high school education or less. Reliability within each Function ranged from 0.90 to 0.96. The PCC-Ca-36 (36-question survey; reliability=0.94) and PCC-Ca-6 (6-question survey; reliability=0.92) measures differentiated between individuals with poor and good health (i.e., known-groups validity) and were highly correlated with the HINTS communication scale (i.e., convergent validity). Conclusion
This study provides theory-grounded PCC measures found to be reliable and valid in colorectal cancer patients in North Carolina. Future work should evaluate measure validity over time and in other cancer populations. Practice implications
The PCC-Ca-36 and PCC-Ca-6 measures may be used for surveillance, intervention research, and quality improvement initiatives
Bioceramic nanocomposite thiol-acrylate polyHIPE scaffolds for enhanced osteoblastic cell culture in 3D
Emulsion-templated (polyHIPE) scaffolds for bone tissue engineering were produced by photopolymerisation of a mixture of trimethylolpropane tris(3-mercaptopropionate) and dipentaerythritol penta-/hexa-acrylate in the presence of hydroxyapatite (HA) or strontium-modified hydroxyapatite (SrHA) nanoparticles. Porous and permeable polyHIPE materials were produced regardless of the type or incorporation level of the bioceramic, although higher loadings resulted in a larger average pore diameter. Inclusion of HA and SrHA into the scaffolds was confirmed by EDX-SEM, FTIR and XPS and quantified by thermogravimetry. Addition of HA to polyHIPE scaffolds significantly enhanced compressive strength (148-216 kPa) without affecting compressive modulus (2.34-2.58 MPa). The resulting materials were evaluated in vitro as scaffolds for the 3D culture of MG63 osteoblastic cells vs. a commercial 3D cell culture scaffold (Alvetex®). Cells were able to migrate throughout all scaffolds, achieving a high density by the end of the culture period (21 days). The presence of HA and in particular SrHA gave greatly enhanced cell proliferation, as determined by staining of histological sections and total protein assay (Bradford). Furthermore, Von Kossa and Alizarin Red staining demonstrated significant mineralisation from inclusion of bioceramics, even at the earliest time point (day 7). Production of alkaline phosphatase (ALP), an early osteogenic marker, was used to investigate the influence of HA and SrHA on cell function. ALP levels were significantly reduced on HA- and SrHA-modified scaffolds by day 7, which agrees with the observed early onset of mineralisation in the presence of the bioceramics. The presented data support our conclusions that HA and SrHA enhance osteoblastic cell proliferation on polyHIPE scaffolds and promote early mineralisation
- …